From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759331Ab1KWAlY (ORCPT ); Tue, 22 Nov 2011 19:41:24 -0500 Received: from cantor2.suse.de ([195.135.220.15]:42892 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759237Ab1KWAlT (ORCPT ); Tue, 22 Nov 2011 19:41:19 -0500 X-Mailbox-Line: From gregkh@clark.kroah.org Tue Nov 22 16:24:07 2011 Message-Id: <20111123002407.235076567@clark.kroah.org> User-Agent: quilt/0.48-20.1.2 Date: Tue, 22 Nov 2011 16:23:35 -0800 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Sarah Sharp Subject: [28/53] xhci: Set slot and ep0 flags for address command. In-Reply-To: <20111123002419.GA8531@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.0-stable review patch. If anyone has any objections, please let me know. ------------------ From: Sarah Sharp commit d31c285b3a71cf9056e6a060de41f37780b0af86 upstream. Matt's AsMedia xHCI host controller was responding with a Context Error to an address device command after a configured device reset. Some sequence of events leads both the slot and endpoint zero add flags cleared to zero, which the AsMedia host doesn't like: [ 223.701839] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 223.701841] xhci_hcd 0000:03:00.0: @ffff880137b25000 (virt) @ffffc000 (dma) 0x000000 - drop flags [ 223.701843] xhci_hcd 0000:03:00.0: @ffff880137b25004 (virt) @ffffc004 (dma) 0x000000 - add flags [ 223.701846] xhci_hcd 0000:03:00.0: @ffff880137b25008 (virt) @ffffc008 (dma) 0x000000 - rsvd2[0] [ 223.701848] xhci_hcd 0000:03:00.0: @ffff880137b2500c (virt) @ffffc00c (dma) 0x000000 - rsvd2[1] [ 223.701850] xhci_hcd 0000:03:00.0: @ffff880137b25010 (virt) @ffffc010 (dma) 0x000000 - rsvd2[2] [ 223.701852] xhci_hcd 0000:03:00.0: @ffff880137b25014 (virt) @ffffc014 (dma) 0x000000 - rsvd2[3] [ 223.701854] xhci_hcd 0000:03:00.0: @ffff880137b25018 (virt) @ffffc018 (dma) 0x000000 - rsvd2[4] [ 223.701857] xhci_hcd 0000:03:00.0: @ffff880137b2501c (virt) @ffffc01c (dma) 0x000000 - rsvd2[5] [ 223.701858] xhci_hcd 0000:03:00.0: Slot Context: [ 223.701860] xhci_hcd 0000:03:00.0: @ffff880137b25020 (virt) @ffffc020 (dma) 0x8400000 - dev_info [ 223.701862] xhci_hcd 0000:03:00.0: @ffff880137b25024 (virt) @ffffc024 (dma) 0x010000 - dev_info2 [ 223.701864] xhci_hcd 0000:03:00.0: @ffff880137b25028 (virt) @ffffc028 (dma) 0x000000 - tt_info [ 223.701866] xhci_hcd 0000:03:00.0: @ffff880137b2502c (virt) @ffffc02c (dma) 0x000000 - dev_state [ 223.701869] xhci_hcd 0000:03:00.0: @ffff880137b25030 (virt) @ffffc030 (dma) 0x000000 - rsvd[0] [ 223.701871] xhci_hcd 0000:03:00.0: @ffff880137b25034 (virt) @ffffc034 (dma) 0x000000 - rsvd[1] [ 223.701873] xhci_hcd 0000:03:00.0: @ffff880137b25038 (virt) @ffffc038 (dma) 0x000000 - rsvd[2] [ 223.701875] xhci_hcd 0000:03:00.0: @ffff880137b2503c (virt) @ffffc03c (dma) 0x000000 - rsvd[3] [ 223.701877] xhci_hcd 0000:03:00.0: Endpoint 00 Context: [ 223.701879] xhci_hcd 0000:03:00.0: @ffff880137b25040 (virt) @ffffc040 (dma) 0x000000 - ep_info [ 223.701881] xhci_hcd 0000:03:00.0: @ffff880137b25044 (virt) @ffffc044 (dma) 0x2000026 - ep_info2 [ 223.701883] xhci_hcd 0000:03:00.0: @ffff880137b25048 (virt) @ffffc048 (dma) 0xffffe8e0 - deq [ 223.701885] xhci_hcd 0000:03:00.0: @ffff880137b25050 (virt) @ffffc050 (dma) 0x000000 - tx_info [ 223.701887] xhci_hcd 0000:03:00.0: @ffff880137b25054 (virt) @ffffc054 (dma) 0x000000 - rsvd[0] [ 223.701889] xhci_hcd 0000:03:00.0: @ffff880137b25058 (virt) @ffffc058 (dma) 0x000000 - rsvd[1] [ 223.701892] xhci_hcd 0000:03:00.0: @ffff880137b2505c (virt) @ffffc05c (dma) 0x000000 - rsvd[2] ... [ 223.701927] xhci_hcd 0000:03:00.0: // Ding dong! [ 223.701992] xhci_hcd 0000:03:00.0: Setup ERROR: address device command for slot 1. The xHCI spec says that both flags must be set to one for the Address Device command. When the device is first enumerated, xhci_setup_addressable_virt_dev() does set those flags. However, when the device is addressed after it has been reset in the configured state, xhci_setup_addressable_virt_dev() is not called, and xhci_copy_ep0_dequeue_into_input_ctx() is called instead. That function relies on the flags being set up by previous commands, which apparently isn't a good assumption. Move the setting of the flags into the common parent function. This should be queued for stable kernels as old as 2.6.35, since that was the first introduction of xhci_copy_ep0_dequeue_into_input_ctx. Signed-off-by: Sarah Sharp Tested-by: Matt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 5 ----- drivers/usb/host/xhci.c | 5 ++++- 2 files changed, 4 insertions(+), 6 deletions(-) --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -875,7 +875,6 @@ int xhci_setup_addressable_virt_dev(stru struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct xhci_slot_ctx *slot_ctx; - struct xhci_input_control_ctx *ctrl_ctx; u32 port_num; struct usb_device *top_dev; @@ -887,12 +886,8 @@ int xhci_setup_addressable_virt_dev(stru return -EINVAL; } ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); - ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx); slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); - /* 2) New slot context and endpoint 0 context are valid*/ - ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); - /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | (u32) udev->route); switch (udev->speed) { --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2875,6 +2875,10 @@ int xhci_address_device(struct usb_hcd * /* Otherwise, update the control endpoint ring enqueue pointer. */ else xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); + ctrl_ctx->drop_flags = 0; + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); @@ -2956,7 +2960,6 @@ int xhci_address_device(struct usb_hcd * virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK) + 1; /* Zero the input context control for later use */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0;