Re: [regression] Re: [PATCH 3/7] mfd: twl4030-irq: drop the kthread

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1411 bytes --]

On Wed, Dec 07, 2011 at 01:04:03PM +0200, Felipe Contreras wrote:
> On Wed, Dec 7, 2011 at 8:51 AM, Felipe Balbi <balbi@ti.com> wrote:
> > On Tue, Dec 06, 2011 at 05:28:58PM +0200, Felipe Contreras wrote:
> >> On Thu, Jun 30, 2011 at 12:51 PM, Felipe Balbi <balbi@ti.com> wrote:
> >> > ... and use threaded IRQ infrastructure. Later
> >> > patches will come dropping both workqueues and
> >> > setting the nested thread flag.
> >>
> >> There's something wrong. When I boot my Nokia N900 with this, as soon
> >> as I press a key from the keyboard the whole device hangs. I don't see
> >> anything on the console framebuffer, and with a jig I can't boot from
> >> MMC, so there isn't much more I can provide at the moment.
> >
> > Funny, this booted fine on my beagle and MMC card uses a twl GPIO for
> > card detection. Maybe it's something fairly obvious that I missed :-(
> 
> Did you try typing anything? That's where the problem happened on my side.

beagle doesn't have keyboard ;-)

> I'll try to flash a system to NAND, since I can't seem to just get the
> MMC to work when the cover is open and the device is connected to the
> jig to see if I can see something from serial console.
> 
> You don't have any idea about what to try?

you could cut the back cover so that it just fits the device on the jig
(I did that to an old cover), then it works just fine :-)

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]