From: Greg KH <gregkh@suse.de>
To: <linux-kernel@vger.kernel.org>, <stable@vger.kernel.org>
Cc: <torvalds@linux-foundation.org>, <akpm@linux-foundation.org>,
<alan@lxorguk.ukuu.org.uk>,
"Sheng-Hui J. Chu" <jeffchu@broadcom.com>,
Jean Delvare <khali@linux-fr.org>
Subject: [01/27] i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
Date: Wed, 07 Dec 2011 08:54:34 -0800 [thread overview]
Message-ID: <20111207165600.523797414@clark.kroah.org> (raw)
In-Reply-To: <20111207165611.GA19872@kroah.com>
2.6.32-longterm review patch. If anyone has any objections, please let me know.
------------------
From: "Jeffrey (Sheng-Hui) Chu" <jeffchu@broadcom.com>
commit cc6bcf7d2ec2234e7b41770185e4dc826390185e upstream.
The wrong bits were put on the wire, fix that.
This fixes kernel bug #42562.
Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/i2c/algos/i2c-algo-bit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -471,7 +471,7 @@ static int bit_doAddress(struct i2c_adap
if (flags & I2C_M_TEN) {
/* a ten bit address */
- addr = 0xf0 | ((msg->addr >> 7) & 0x03);
+ addr = 0xf0 | ((msg->addr >> 7) & 0x06);
bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
/* try extended address code...*/
ret = try_address(i2c_adap, addr, retries);
@@ -481,7 +481,7 @@ static int bit_doAddress(struct i2c_adap
return -EREMOTEIO;
}
/* the remaining 8 bit address */
- ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
+ ret = i2c_outb(i2c_adap, msg->addr & 0xff);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
dev_err(&i2c_adap->dev, "died at 2nd address code\n");
next prev parent reply other threads:[~2011-12-07 17:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-07 16:56 [00/27] 2.6.32.50-longterm review Greg KH
2011-12-07 16:54 ` Greg KH [this message]
2011-12-07 16:54 ` [02/27] eCryptfs: Extend array bounds for all filename chars Greg KH
2011-12-07 16:54 ` [03/27] PCI hotplug: shpchp: dont blindly claim non-AMD 0x7450 device IDs Greg KH
2011-12-07 16:54 ` [04/27] ARM: 7161/1: errata: no automatic store buffer drain Greg KH
2011-12-07 16:54 ` [05/27] ALSA: lx6464es - fix device communication via command bus Greg KH
2011-12-07 17:13 ` Tim Blechmann
2011-12-07 16:54 ` [06/27] SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared Greg KH
2011-12-07 16:54 ` [07/27] timekeeping: add arch_offset hook to ktime_get functions Greg KH
2011-12-07 16:54 ` [08/27] p54spi: Add missing spin_lock_init Greg KH
2011-12-07 16:54 ` [09/27] p54spi: Fix workqueue deadlock Greg KH
2011-12-07 16:54 ` [10/27] nl80211: fix MAC address validation Greg KH
2011-12-07 16:54 ` [11/27] gro: reset vlan_tci on reuse Greg KH
2011-12-07 16:54 ` [12/27] staging: usbip: bugfix for deadlock Greg KH
2011-12-07 16:54 ` [13/27] staging: comedi: fix oops for USB DAQ devices Greg KH
2011-12-07 16:54 ` [14/27] Staging: comedi: fix signal handling in read and write Greg KH
2011-12-07 16:54 ` [15/27] USB: whci-hcd: fix endian conversion in qset_clear() Greg KH
2011-12-07 16:54 ` [16/27] usb: ftdi_sio: add PID for Propox ISPcable III Greg KH
2011-12-07 16:54 ` [17/27] usb: option: add SIMCom SIM5218 Greg KH
2011-12-07 16:54 ` [18/27] USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 Greg KH
2011-12-07 16:54 ` [19/27] SCSI: scsi_lib: fix potential NULL dereference Greg KH
2011-12-07 16:54 ` [20/27] SCSI: Silencing killing requests for dead queue Greg KH
2011-12-07 16:54 ` [21/27] cifs: fix cifs stable patch cifs-fix-oplock-break-handling-try-2.patch Greg KH
2011-12-07 16:54 ` [22/27] sched, x86: Avoid unnecessary overflow in sched_clock Greg KH
2011-12-07 16:54 ` [23/27] x86/mpparse: Account for bus types other than ISA and PCI Greg KH
2011-12-07 16:54 ` [24/27] oprofile, x86: Fix crash when unloading module (nmi timer mode) Greg KH
2011-12-07 16:54 ` [25/27] genirq: Fix race condition when stopping the irq thread Greg KH
2011-12-07 16:54 ` [26/27] tick-broadcast: Stop active broadcast device when replacing it Greg KH
2011-12-07 16:55 ` [27/27] clockevents: Set noop handler in clockevents_exchange_device() Greg KH
2011-12-29 12:09 ` Jonathan Nieder
2011-12-30 1:05 ` Linus Torvalds
2011-12-30 15:07 ` Tim Gardner
[not found] ` <CA++bM2uqcWFM6=WdmrusmugQw2nH_KDyySKH+1qyr8GK0Cq14A@mail.gmail.com>
2012-01-05 10:27 ` Feng Tang
2012-01-10 14:23 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111207165600.523797414@clark.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeffchu@broadcom.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®