mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Rusty Russell <rusty@rustcorp.com.au>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Steve Glendinning <steve.glendinning@smsc.com>,
	Jean Delvare <khali@linux-fr.org>,
	Hoang-Nam Nguyen <hnguyen@de.ibm.com>,
	Christoph Raisch <raisch@de.ibm.com>,
	Roland Dreier <roland@kernel.org>,
	Sean Hefty <sean.hefty@intel.com>,
	Hal Rosenstock <hal.rosenstock@gmail.com>,
	"linux390@de.ibm.com" <linux390@de.ibm.com>,
	Anton Altaparmakov <anton@tuxera.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.de>,
	"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
	"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>,
	"linux-s390@vger.kernel.org" <linux-s390@vger.kernel.org>,
	"linux-ntfs-dev@lists.sourceforge.net" 
	<linux-ntfs-dev@lists.sourceforge.net>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: [PATCH 2/15] module_param: avoid bool abuse, add bint for special cases.
Date: Thu, 15 Dec 2011 12:41:08 -0800	[thread overview]
Message-ID: <20111215204108.GB10672@ericsson.com> (raw)
In-Reply-To: <877h1ytu4d.fsf@rustcorp.com.au>

On Wed, Dec 14, 2011 at 10:02:26PM -0500, Rusty Russell wrote:
> For historical reasons, we allow module_param(bool) to take an int (or
> an unsigned int).  That's going away.
> 
> A few drivers really want an int: they set it to -1 and a parameter
> will set it to 0 or 1.  This sucks: reading them from sysfs will give
> 'Y' for both -1 and 1, but if we change it to an int, then the users
> might be broken (if they did "param" instead of "param=1").
> 
> Use a new 'bint' parser for them.
> 
> (ntfs has a different problem: it needs an int for debug_msgs because
> it's also exposed via sysctl.)
> 
> Cc: Steve Glendinning <steve.glendinning@smsc.com>
> Cc: Jean Delvare <khali@linux-fr.org>
> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
> Cc: Christoph Raisch <raisch@de.ibm.com>
> Cc: Roland Dreier <roland@kernel.org>
> Cc: Sean Hefty <sean.hefty@intel.com>
> Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
> Cc: linux390@de.ibm.com
> Cc: Anton Altaparmakov <anton@tuxera.com>
> Cc: Jaroslav Kysela <perex@perex.cz>
> Cc: Takashi Iwai <tiwai@suse.de>
> Cc: lm-sensors@lm-sensors.org
> Cc: linux-rdma@vger.kernel.org
> Cc: linux-s390@vger.kernel.org
> Cc: linux-ntfs-dev@lists.sourceforge.net
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
> ---
>  drivers/hwmon/emc2103.c                |    2 +-

For the hwmon driver:

Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

>  drivers/infiniband/hw/ehca/ehca_main.c |    2 +-
>  drivers/s390/cio/cmf.c                 |    2 +-
>  fs/ntfs/super.c                        |    2 +-
>  include/linux/moduleparam.h            |    6 ++++++
>  kernel/params.c                        |   24 ++++++++++++++++++++++++
>  sound/pci/intel8x0.c                   |    4 ++--
>  7 files changed, 36 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
> --- a/drivers/hwmon/emc2103.c
> +++ b/drivers/hwmon/emc2103.c
> @@ -55,7 +55,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34
>   * it.  Default is to leave the device in the state it's already in (-1).
>   * This parameter allows APD mode to be optionally forced on or off */
>  static int apd = -1;
> -module_param(apd, bool, 0);
> +module_param(apd, bint, 0);
>  MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
>  
>  struct temperature {
> diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
> --- a/drivers/infiniband/hw/ehca/ehca_main.c
> +++ b/drivers/infiniband/hw/ehca/ehca_main.c
> @@ -82,7 +82,7 @@ module_param_named(port_act_time, ehca_p
>  module_param_named(poll_all_eqs,  ehca_poll_all_eqs,  bool, S_IRUGO);
>  module_param_named(static_rate,   ehca_static_rate,   int,  S_IRUGO);
>  module_param_named(scaling_code,  ehca_scaling_code,  bool, S_IRUGO);
> -module_param_named(lock_hcalls,   ehca_lock_hcalls,   bool, S_IRUGO);
> +module_param_named(lock_hcalls,   ehca_lock_hcalls,   bint, S_IRUGO);
>  module_param_named(number_of_cqs, ehca_max_cq,        int,  S_IRUGO);
>  module_param_named(number_of_qps, ehca_max_qp,        int,  S_IRUGO);
>  
> diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
> --- a/drivers/s390/cio/cmf.c
> +++ b/drivers/s390/cio/cmf.c
> @@ -98,7 +98,7 @@ enum cmb_format {
>   * enum cmb_format.
>   */
>  static int format = CMF_AUTODETECT;
> -module_param(format, bool, 0444);
> +module_param(format, bint, 0444);
>  
>  /**
>   * struct cmb_operations - functions to use depending on cmb_format
> diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
> --- a/fs/ntfs/super.c
> +++ b/fs/ntfs/super.c
> @@ -3198,7 +3198,7 @@ MODULE_DESCRIPTION("NTFS 1.2/3.x driver 
>  MODULE_VERSION(NTFS_VERSION);
>  MODULE_LICENSE("GPL");
>  #ifdef DEBUG
> -module_param(debug_msgs, bool, 0);
> +module_param(debug_msgs, bint, 0);
>  MODULE_PARM_DESC(debug_msgs, "Enable debug messages.");
>  #endif
>  
> diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
> --- a/include/linux/moduleparam.h
> +++ b/include/linux/moduleparam.h
> @@ -367,6 +367,12 @@ extern int param_set_invbool(const char 
>  extern int param_get_invbool(char *buffer, const struct kernel_param *kp);
>  #define param_check_invbool(name, p) __param_check(name, p, bool)
>  
> +/* An int, which can only be set like a bool (though it shows as an int). */
> +extern struct kernel_param_ops param_ops_bint;
> +extern int param_set_bint(const char *val, const struct kernel_param *kp);
> +#define param_get_bint param_get_int
> +#define param_check_bint param_check_int
> +
>  /**
>   * module_param_array - a parameter which is an array of some type
>   * @name: the name of the array variable
> diff --git a/kernel/params.c b/kernel/params.c
> --- a/kernel/params.c
> +++ b/kernel/params.c
> @@ -369,6 +369,30 @@ struct kernel_param_ops param_ops_invboo
>  };
>  EXPORT_SYMBOL(param_ops_invbool);
>  
> +int param_set_bint(const char *val, const struct kernel_param *kp)
> +{
> +	struct kernel_param boolkp;
> +	bool v;
> +	int ret;
> +
> +	/* Match bool exactly, by re-using it. */
> +	boolkp = *kp;
> +	boolkp.arg = &v;
> +	boolkp.flags |= KPARAM_ISBOOL;
> +
> +	ret = param_set_bool(val, &boolkp);
> +	if (ret == 0)
> +		*(int *)kp->arg = v;
> +	return ret;
> +}
> +EXPORT_SYMBOL(param_set_bint);
> +
> +struct kernel_param_ops param_ops_bint = {
> +	.set = param_set_bint,
> +	.get = param_get_int,
> +};
> +EXPORT_SYMBOL(param_ops_bint);
> +
>  /* We break the rule and mangle the string. */
>  static int param_array(const char *name,
>  		       const char *val,
> diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
> --- a/sound/pci/intel8x0.c
> +++ b/sound/pci/intel8x0.c
> @@ -95,13 +95,13 @@ module_param(ac97_quirk, charp, 0444);
>  MODULE_PARM_DESC(ac97_quirk, "AC'97 workaround for strange hardware.");
>  module_param(buggy_semaphore, bool, 0444);
>  MODULE_PARM_DESC(buggy_semaphore, "Enable workaround for hardwares with problematic codec semaphores.");
> -module_param(buggy_irq, bool, 0444);
> +module_param(buggy_irq, bint, 0444);
>  MODULE_PARM_DESC(buggy_irq, "Enable workaround for buggy interrupts on some motherboards.");
>  module_param(xbox, bool, 0444);
>  MODULE_PARM_DESC(xbox, "Set to 1 for Xbox, if you have problems with the AC'97 codec detection.");
>  module_param(spdif_aclink, int, 0444);
>  MODULE_PARM_DESC(spdif_aclink, "S/PDIF over AC-link.");
> -module_param(inside_vm, bool, 0444);
> +module_param(inside_vm, bint, 0444);
>  MODULE_PARM_DESC(inside_vm, "KVM/Parallels optimization.");
>  
>  /* just for backward compatibility */

-- 
Guenter Roeck
Distinguished Engineer
PDU IP Systems

      parent reply	other threads:[~2011-12-15 20:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-15  3:02 Rusty Russell
2011-12-15 12:31 ` Takashi Iwai
2011-12-15 20:41 ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111215204108.GB10672@ericsson.com \
    --to=guenter.roeck@ericsson.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=anton@tuxera.com \
    --cc=hal.rosenstock@gmail.com \
    --cc=hnguyen@de.ibm.com \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-ntfs-dev@lists.sourceforge.net \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=linux390@de.ibm.com \
    --cc=lm-sensors@lm-sensors.org \
    --cc=pawel.moll@arm.com \
    --cc=perex@perex.cz \
    --cc=raisch@de.ibm.com \
    --cc=roland@kernel.org \
    --cc=rusty@rustcorp.com.au \
    --cc=sean.hefty@intel.com \
    --cc=steve.glendinning@smsc.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome