From: Pavel Machek <pavel@ucw.cz>
To: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <Barry.Song@csr.com>,
rjw@sisk.pl, linux-pm@lists.linux-foundation.org,
workgroup.linux@csr.com, Xiangzhen Ye <Xiangzhen.Ye@csr.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Barry Song <Baohua.Song@csr.com>
Subject: Re: [PATCH v2] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative
Date: Thu, 5 Jan 2012 19:46:05 +0100 [thread overview]
Message-ID: <20120105184604.GA11065@atrey.karlin.mff.cuni.cz> (raw)
In-Reply-To: <CAGsJ_4ziRj1oEhmMYjc6yJvS2FHYn+uRWmSaggnJQQjqi=B6gw@mail.gmail.com>
Hi!
Is the check even useful these days? Should we remove it altogether?
Pavel
> Pavel ,Rafael, any feedback?
> -barry
>
> 2011/11/25 Barry Song <Barry.Song@csr.com>:
> > From: Barry Song <baohua.song@csr.com>
> >
> > Current swsusp requires swap partitions even larger than real saved pages
> > based on the worst compression ratio:
> > but for an embedded system, which has limited storage space, then it might
> > can't give the large partition to save snapshot.
> > In the another way, some embedded systems can definitely know the most size
> > needed for snapshot since they run some specific application lists.
> > So this patch provides the possibility for users to tell kernel even
> > the system has a little snapshot partition, but it is still enough.
> > For example, if the system need to save 120MB memory, origin swsusp will require
> > a 130MB partition to save snapshot. but if users know 30MB is enough for them(
> > compressed image will be less than 30MB), they just make a 30MB partition by
> > echo 0 > /sys/power/check_swap_size
> >
> > Signed-off-by: Barry Song <Baohua.Song@csr.com>
> > Cc: Xiangzhen Ye <Xiangzhen.Ye@csr.com>
> > ---
> > -v2:drop swap_enough bootargs and use /sys/power/check_swap_size node
> >
> > Documentation/power/interface.txt | 5 +++++
> > kernel/power/hibernate.c | 22 ++++++++++++++++++++++
> > kernel/power/power.h | 2 ++
> > kernel/power/swap.c | 9 +++++++++
> > 4 files changed, 38 insertions(+), 0 deletions(-)
> >
> > diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
> > index c537834..5e205f0 100644
> > --- a/Documentation/power/interface.txt
> > +++ b/Documentation/power/interface.txt
> > @@ -47,6 +47,11 @@ Writing to this file will accept one of
> > 'testproc'
> > 'test'
> >
> > +/sys/power/check_swap_size controls whether we can skip checking the swap
> > +partition size by worst compression ratio. If users know the swap partition
> > +is enough for compressed snapshot, write 0 to /sys/power/check_swap_size.
> > +It is useful for an embedded system with known running softwares.
> > +
> > /sys/power/image_size controls the size of the image created by
> > the suspend-to-disk mechanism. It can be written a string
> > representing a non-negative integer that will be used as an upper
> > diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> > index 1c53f7f..5552473 100644
> > --- a/kernel/power/hibernate.c
> > +++ b/kernel/power/hibernate.c
> > @@ -1024,11 +1024,33 @@ static ssize_t reserved_size_store(struct kobject *kobj,
> >
> > power_attr(reserved_size);
> >
> > +static ssize_t check_swap_size_show(struct kobject *kobj, struct kobj_attribute *attr,
> > + char *buf)
> > +{
> > + return sprintf(buf, "%d\n", check_swap_size);
> > +}
> > +
> > +static ssize_t check_swap_size_store(struct kobject *kobj, struct kobj_attribute *attr,
> > + const char *buf, size_t n)
> > +{
> > + int check_size;
> > +
> > + if (sscanf(buf, "%d", &check_size) == 1) {
> > + check_swap_size = check_size;
> > + return n;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +power_attr(check_swap_size);
> > +
> > static struct attribute * g[] = {
> > &disk_attr.attr,
> > &resume_attr.attr,
> > &image_size_attr.attr,
> > &reserved_size_attr.attr,
> > + &check_swap_size_attr.attr,
> > NULL,
> > };
> >
> > diff --git a/kernel/power/power.h b/kernel/power/power.h
> > index 23a2db1..4f0fa78 100644
> > --- a/kernel/power/power.h
> > +++ b/kernel/power/power.h
> > @@ -74,6 +74,8 @@ static struct kobj_attribute _name##_attr = { \
> >
> > /* Preferred image size in bytes (default 500 MB) */
> > extern unsigned long image_size;
> > +/* If 0, skip checking whether the swap size is enough for compressed snapshot */
> > +extern int check_swap_size;
> > /* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
> > extern unsigned long reserved_size;
> > extern int in_suspend;
> > diff --git a/kernel/power/swap.c b/kernel/power/swap.c
> > index 11a594c..db90195 100644
> > --- a/kernel/power/swap.c
> > +++ b/kernel/power/swap.c
> > @@ -37,6 +37,12 @@
> > #define HIBERNATE_SIG "S1SUSPEND"
> >
> > /*
> > + * if users know swap partitions are enough for compressed snapshots,
> > + * echo 0 > /sys/power/check_swap_size
> > + */
> > +int check_swap_size = 1;
> > +
> > +/*
> > * The swap map is a data structure used for keeping track of each page
> > * written to a swap partition. It consists of many swap_map_page
> > * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
> > @@ -772,6 +778,9 @@ static int enough_swap(unsigned int nr_pages, unsigned int flags)
> > unsigned int free_swap = count_swap_pages(root_swap, 1);
> > unsigned int required;
> >
> > + if (!check_swap_size)
> > + return 1;
> > +
> > pr_debug("PM: Free swap pages: %u\n", free_swap);
> >
> > required = PAGES_FOR_IO + ((flags & SF_NOCOMPRESS_MODE) ?
> > --
> > 1.7.1
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2012-01-05 18:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-25 8:07 Barry Song
2011-11-25 10:21 ` Matthieu CASTET
2011-11-25 13:42 ` Barry Song
2011-12-15 8:50 ` Barry Song
2012-01-05 18:46 ` Pavel Machek [this message]
2012-01-06 2:20 ` Barry Song
2012-01-08 21:31 ` Rafael J. Wysocki
2012-01-09 2:50 ` Barry Song
2012-01-09 21:46 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120105184604.GA11065@atrey.karlin.mff.cuni.cz \
--to=pavel@ucw.cz \
--cc=21cnbao@gmail.com \
--cc=Baohua.Song@csr.com \
--cc=Barry.Song@csr.com \
--cc=Xiangzhen.Ye@csr.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=rjw@sisk.pl \
--cc=workgroup.linux@csr.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®