From: Cyrill Gorcunov <gorcunov@openvz.org>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Pavel Emelyanov <xemul@parallels.com>,
Serge Hallyn <serge.hallyn@canonical.com>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Kees Cook <keescook@chromium.org>, Tejun Heo <tj@kernel.org>,
Andrew Vagin <avagin@openvz.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Alexey Dobriyan <adobriyan@gmail.com>,
Andi Kleen <andi@firstfloor.org>,
Cyrill Gorcunov <gorcunov@openvz.org>,
Michael Kerrisk <mtk.manpages@gmail.com>,
Vasiliy Kulikov <segoon@openwall.com>
Subject: [patch cr 4/4] c/r: prctl: Extend PR_SET_MM to set up more mm_struct entries
Date: Mon, 30 Jan 2012 18:09:09 +0400 [thread overview]
Message-ID: <20120130141852.466613862@openvz.org> (raw)
In-Reply-To: <20120130140905.441199885@openvz.org>
[-- Attachment #1: prctl-restore-mm-members-5 --]
[-- Type: text/plain, Size: 5372 bytes --]
After restore we would like the 'ps' command show the command
line and evironment exactly the same it was at checkpoint time.
So this additional PR_SET_MM_ allow us to do so. Note that
these members of mm_struct is rather used for output in
procfs, except auxv vector which is used by ld.so mostly.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/prctl.h | 5 ++
kernel/sys.c | 86 ++++++++++++++++++++++++++++++++------------------
2 files changed, 61 insertions(+), 30 deletions(-)
Index: linux-2.6.git/include/linux/prctl.h
===================================================================
--- linux-2.6.git.orig/include/linux/prctl.h
+++ linux-2.6.git/include/linux/prctl.h
@@ -113,5 +113,10 @@
# define PR_SET_MM_START_STACK 5
# define PR_SET_MM_START_BRK 6
# define PR_SET_MM_BRK 7
+# define PR_SET_MM_ARG_START 8
+# define PR_SET_MM_ARG_END 9
+# define PR_SET_MM_ENV_START 10
+# define PR_SET_MM_ENV_END 11
+# define PR_SET_MM_AUXV 12
#endif /* _LINUX_PRCTL_H */
Index: linux-2.6.git/kernel/sys.c
===================================================================
--- linux-2.6.git.orig/kernel/sys.c
+++ linux-2.6.git/kernel/sys.c
@@ -1693,17 +1693,23 @@ SYSCALL_DEFINE1(umask, int, mask)
}
#ifdef CONFIG_CHECKPOINT_RESTORE
+static bool vma_flags_mismatch(struct vm_area_struct *vma,
+ unsigned long required,
+ unsigned long banned)
+{
+ return (vma->vm_flags & required) != required ||
+ (vma->vm_flags & banned);
+}
+
static int prctl_set_mm(int opt, unsigned long addr,
unsigned long arg4, unsigned long arg5)
{
unsigned long rlim = rlimit(RLIMIT_DATA);
- unsigned long vm_req_flags;
- unsigned long vm_bad_flags;
+ struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
int error = 0;
- struct mm_struct *mm = current->mm;
- if (arg4 | arg5)
+ if (arg5 || (arg4 && opt != PR_SET_MM_AUXV))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
@@ -1715,7 +1721,9 @@ static int prctl_set_mm(int opt, unsigne
down_read(&mm->mmap_sem);
vma = find_vma(mm, addr);
- if (opt != PR_SET_MM_START_BRK && opt != PR_SET_MM_BRK) {
+ if (opt != PR_SET_MM_START_BRK &&
+ opt != PR_SET_MM_BRK &&
+ opt != PR_SET_MM_AUXV) {
/* It must be existing VMA */
if (!vma || vma->vm_start > addr)
goto out;
@@ -1725,11 +1733,8 @@ static int prctl_set_mm(int opt, unsigne
switch (opt) {
case PR_SET_MM_START_CODE:
case PR_SET_MM_END_CODE:
- vm_req_flags = VM_READ | VM_EXEC;
- vm_bad_flags = VM_WRITE | VM_MAYSHARE;
-
- if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
- (vma->vm_flags & vm_bad_flags))
+ if (vma_flags_mismatch(vma, VM_READ | VM_EXEC,
+ VM_WRITE | VM_MAYSHARE))
goto out;
if (opt == PR_SET_MM_START_CODE)
@@ -1740,11 +1745,8 @@ static int prctl_set_mm(int opt, unsigne
case PR_SET_MM_START_DATA:
case PR_SET_MM_END_DATA:
- vm_req_flags = VM_READ | VM_WRITE;
- vm_bad_flags = VM_EXEC | VM_MAYSHARE;
-
- if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
- (vma->vm_flags & vm_bad_flags))
+ if (vma_flags_mismatch(vma, VM_READ | VM_WRITE,
+ VM_EXEC | VM_MAYSHARE))
goto out;
if (opt == PR_SET_MM_START_DATA)
@@ -1753,19 +1755,6 @@ static int prctl_set_mm(int opt, unsigne
mm->end_data = addr;
break;
- case PR_SET_MM_START_STACK:
-
-#ifdef CONFIG_STACK_GROWSUP
- vm_req_flags = VM_READ | VM_WRITE | VM_GROWSUP;
-#else
- vm_req_flags = VM_READ | VM_WRITE | VM_GROWSDOWN;
-#endif
- if ((vma->vm_flags & vm_req_flags) != vm_req_flags)
- goto out;
-
- mm->start_stack = addr;
- break;
-
case PR_SET_MM_START_BRK:
if (addr <= mm->end_data)
goto out;
@@ -1790,16 +1779,53 @@ static int prctl_set_mm(int opt, unsigne
mm->brk = addr;
break;
+ case PR_SET_MM_START_STACK:
+ case PR_SET_MM_ARG_START:
+ case PR_SET_MM_ARG_END:
+ case PR_SET_MM_ENV_START:
+ case PR_SET_MM_ENV_END:
+#ifdef CONFIG_STACK_GROWSUP
+ if (vma_flags_mismatch(vma, VM_READ | VM_WRITE | VM_GROWSUP, 0))
+#else
+ if (vma_flags_mismatch(vma, VM_READ | VM_WRITE | VM_GROWSDOWN, 0))
+#endif
+ goto out;
+ if (opt == PR_SET_MM_START_STACK)
+ mm->start_stack = addr;
+ else if (opt == PR_SET_MM_ARG_START)
+ mm->arg_start = addr;
+ else if (opt == PR_SET_MM_ARG_END)
+ mm->arg_end = addr;
+ else if (opt == PR_SET_MM_ENV_START)
+ mm->env_start = addr;
+ else if (opt == PR_SET_MM_ENV_END)
+ mm->env_end = addr;
+ break;
+
+ case PR_SET_MM_AUXV: {
+ unsigned long user_auxv[AT_VECTOR_SIZE];
+
+ if (arg4 > sizeof(mm->saved_auxv))
+ goto out;
+ up_read(&mm->mmap_sem);
+
+ if (copy_from_user(user_auxv, (const void __user *)addr, arg4))
+ return EFAULT;
+
+ task_lock(current);
+ memcpy(mm->saved_auxv, user_auxv, arg4);
+ task_unlock(current);
+
+ return 0;
+ }
default:
error = -EINVAL;
goto out;
}
error = 0;
-
out:
up_read(&mm->mmap_sem);
-
return error;
}
#else /* CONFIG_CHECKPOINT_RESTORE */
next prev parent reply other threads:[~2012-01-30 14:19 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-30 14:09 [patch cr 0/4] [patch cr 0/@total@] Cyrill Gorcunov
2012-01-30 14:09 ` [patch cr 1/4] fs, proc: Introduce /proc/<pid>/task/<tid>/children entry v9 Cyrill Gorcunov
2012-01-30 14:09 ` [patch cr 2/4] [RFC] syscalls, x86: Add __NR_kcmp syscall v7 Cyrill Gorcunov
2012-01-30 19:58 ` Jonathan Corbet
2012-01-30 21:07 ` Cyrill Gorcunov
2012-01-30 21:11 ` H. Peter Anvin
2012-02-02 23:26 ` Andrew Morton
2012-02-03 2:27 ` H. Peter Anvin
2012-02-03 7:09 ` Cyrill Gorcunov
2012-02-03 7:46 ` Ingo Molnar
2012-02-03 8:35 ` Cyrill Gorcunov
2012-02-03 9:09 ` Ingo Molnar
2012-02-03 9:22 ` Andrew Morton
2012-02-03 9:28 ` Cyrill Gorcunov
2012-02-03 17:32 ` H. Peter Anvin
2012-02-03 17:35 ` H. Peter Anvin
2012-02-03 17:42 ` Cyrill Gorcunov
2012-02-03 9:52 ` Ingo Molnar
2012-02-03 10:07 ` [PATCH] SubmittingPatches: Increase the line length limit from 80 to 100 colums Ingo Molnar
2012-02-03 10:17 ` Pekka Enberg
2012-02-03 10:23 ` Cyrill Gorcunov
2012-02-03 10:40 ` Alexey Dobriyan
2012-02-03 16:13 ` Tejun Heo
2012-02-03 16:39 ` hpanvin@gmail.com
2012-02-03 17:56 ` Andi Kleen
2012-02-03 20:57 ` Andrew Morton
2012-02-03 21:00 ` H. Peter Anvin
2012-02-03 21:06 ` H. Peter Anvin
2012-02-04 13:08 ` Ingo Molnar
2012-02-03 21:27 ` Linus Torvalds
2012-02-03 23:20 ` [PATCH] checkpatch: Warn on code with 6+ tab indentation Joe Perches
2012-02-04 1:27 ` Linus Torvalds
2012-02-04 1:33 ` Joe Perches
2012-02-04 3:09 ` Linus Torvalds
2012-02-04 3:21 ` Joe Perches
2012-02-04 3:35 ` Linus Torvalds
2012-02-04 3:58 ` Joe Perches
2012-02-04 1:37 ` Andrew Morton
2012-02-04 2:40 ` Eric W. Biederman
2012-02-04 2:46 ` Joe Perches
2012-02-04 4:45 ` Tony Luck
2012-02-04 4:53 ` Joe Perches
2012-02-04 13:03 ` [PATCH, v2] checkpatch: Warn on code with 6+ tab indentation, remove 80col warning Ingo Molnar
2012-02-04 16:22 ` Joe Perches
2012-02-04 18:02 ` Ingo Molnar
2012-02-04 18:48 ` Joe Perches
2012-02-04 18:54 ` Pekka Enberg
2012-02-04 19:27 ` Joe Perches
2012-02-04 19:32 ` Pekka Enberg
2012-02-05 11:38 ` Ingo Molnar
2012-02-05 16:21 ` Joe Perches
2012-02-05 18:13 ` Ingo Molnar
2012-02-05 19:01 ` [PATCH] checkpatch: Add line-length options, set default to 100 Joe Perches
2012-02-06 12:36 ` Dan Carpenter
2012-02-04 1:24 ` [PATCH] SubmittingPatches: Increase the line length limit from 80 to 100 colums Randy Dunlap
2012-02-09 21:55 ` Jan Engelhardt
2012-02-09 22:09 ` Joe Perches
2012-02-09 22:30 ` Mark Brown
2012-01-30 14:09 ` [patch cr 3/4] c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat Cyrill Gorcunov
2012-02-02 23:26 ` Andrew Morton
2012-02-03 7:11 ` Cyrill Gorcunov
2012-01-30 14:09 ` Cyrill Gorcunov [this message]
2012-02-02 23:27 ` [patch cr 4/4] c/r: prctl: Extend PR_SET_MM to set up more mm_struct entries Andrew Morton
2012-02-03 7:18 ` Cyrill Gorcunov
2012-02-02 23:26 ` [patch cr 0/4] [patch cr 0/@total@] Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120130141852.466613862@openvz.org \
--to=gorcunov@openvz.org \
--cc=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andi@firstfloor.org \
--cc=avagin@openvz.org \
--cc=ebiederm@xmission.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtk.manpages@gmail.com \
--cc=segoon@openwall.com \
--cc=serge.hallyn@canonical.com \
--cc=tj@kernel.org \
--cc=xemul@parallels.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome