From: Mike Travis <travis@sgi.com>
To: Ingo Molnar <mingo@elte.hu>,
Andrew Morton <akpm@linux-foundation.org>,
Jack Steiner <steiner@sgi.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] x86, pci: Increase the number of iommus supported to be MAX_IO_APICS
Date: Thu, 02 Feb 2012 17:56:52 -0600 [thread overview]
Message-ID: <20120202235650.884390443@gulag1.americas.sgi.com> (raw)
In-Reply-To: <20120202235650.563029146@gulag1.americas.sgi.com>
[-- Attachment #1: uv2-up-iommu-limit --]
[-- Type: text/plain, Size: 4460 bytes --]
The number of IOMMUs supported should be the same as the number of IO APICS.
This limit comes into play when the IOMMUs are identity mapped, thus the
number of possible IOMMUs in the "static identity" (si) domain should be
this same number.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
---
drivers/iommu/intel-iommu.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
--- linux.orig/drivers/iommu/intel-iommu.c
+++ linux/drivers/iommu/intel-iommu.c
@@ -357,7 +357,8 @@ static int hw_pass_through = 1;
struct dmar_domain {
int id; /* domain id */
int nid; /* node id */
- unsigned long iommu_bmp; /* bitmap of iommus this domain uses*/
+ DECLARE_BITMAP(iommu_bmp, MAX_IO_APICS);
+ /* bitmap of iommus this domain uses*/
struct list_head devices; /* all devices' list */
struct iova_domain iovad; /* iova's that belong to this domain */
@@ -569,7 +570,7 @@ static struct intel_iommu *domain_get_io
BUG_ON(domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE);
BUG_ON(domain->flags & DOMAIN_FLAG_STATIC_IDENTITY);
- iommu_id = find_first_bit(&domain->iommu_bmp, g_num_of_iommus);
+ iommu_id = find_first_bit(domain->iommu_bmp, g_num_of_iommus);
if (iommu_id < 0 || iommu_id >= g_num_of_iommus)
return NULL;
@@ -582,7 +583,7 @@ static void domain_update_iommu_coherenc
domain->iommu_coherency = 1;
- for_each_set_bit(i, &domain->iommu_bmp, g_num_of_iommus) {
+ for_each_set_bit(i, domain->iommu_bmp, g_num_of_iommus) {
if (!ecap_coherent(g_iommus[i]->ecap)) {
domain->iommu_coherency = 0;
break;
@@ -596,7 +597,7 @@ static void domain_update_iommu_snooping
domain->iommu_snooping = 1;
- for_each_set_bit(i, &domain->iommu_bmp, g_num_of_iommus) {
+ for_each_set_bit(i, domain->iommu_bmp, g_num_of_iommus) {
if (!ecap_sc_support(g_iommus[i]->ecap)) {
domain->iommu_snooping = 0;
break;
@@ -1332,7 +1333,7 @@ static struct dmar_domain *alloc_domain(
return NULL;
domain->nid = -1;
- memset(&domain->iommu_bmp, 0, sizeof(unsigned long));
+ memset(domain->iommu_bmp, 0, sizeof(domain->iommu_bmp));
domain->flags = 0;
return domain;
@@ -1358,7 +1359,7 @@ static int iommu_attach_domain(struct dm
domain->id = num;
set_bit(num, iommu->domain_ids);
- set_bit(iommu->seq_id, &domain->iommu_bmp);
+ set_bit(iommu->seq_id, domain->iommu_bmp);
iommu->domains[num] = domain;
spin_unlock_irqrestore(&iommu->lock, flags);
@@ -1383,7 +1384,7 @@ static void iommu_detach_domain(struct d
if (found) {
clear_bit(num, iommu->domain_ids);
- clear_bit(iommu->seq_id, &domain->iommu_bmp);
+ clear_bit(iommu->seq_id, domain->iommu_bmp);
iommu->domains[num] = NULL;
}
spin_unlock_irqrestore(&iommu->lock, flags);
@@ -1525,7 +1526,7 @@ static void domain_exit(struct dmar_doma
dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
for_each_active_iommu(iommu, drhd)
- if (test_bit(iommu->seq_id, &domain->iommu_bmp))
+ if (test_bit(iommu->seq_id, domain->iommu_bmp))
iommu_detach_domain(domain, iommu);
free_domain_mem(domain);
@@ -1651,7 +1652,7 @@ static int domain_context_mapping_one(st
spin_unlock_irqrestore(&iommu->lock, flags);
spin_lock_irqsave(&domain->iommu_lock, flags);
- if (!test_and_set_bit(iommu->seq_id, &domain->iommu_bmp)) {
+ if (!test_and_set_bit(iommu->seq_id, domain->iommu_bmp)) {
domain->iommu_count++;
if (domain->iommu_count == 1)
domain->nid = iommu->node;
@@ -3746,7 +3747,7 @@ static void domain_remove_one_dev_info(s
if (found == 0) {
unsigned long tmp_flags;
spin_lock_irqsave(&domain->iommu_lock, tmp_flags);
- clear_bit(iommu->seq_id, &domain->iommu_bmp);
+ clear_bit(iommu->seq_id, domain->iommu_bmp);
domain->iommu_count--;
domain_update_iommu_cap(domain);
spin_unlock_irqrestore(&domain->iommu_lock, tmp_flags);
@@ -3788,7 +3789,7 @@ static void vm_domain_remove_all_dev_inf
*/
spin_lock_irqsave(&domain->iommu_lock, flags2);
if (test_and_clear_bit(iommu->seq_id,
- &domain->iommu_bmp)) {
+ domain->iommu_bmp)) {
domain->iommu_count--;
domain_update_iommu_cap(domain);
}
@@ -3813,7 +3814,7 @@ static struct dmar_domain *iommu_alloc_v
domain->id = vm_domid++;
domain->nid = -1;
- memset(&domain->iommu_bmp, 0, sizeof(unsigned long));
+ memset(domain->iommu_bmp, 0, sizeof(domain->iommu_bmp));
domain->flags = DOMAIN_FLAG_VIRTUAL_MACHINE;
return domain;
--
next prev parent reply other threads:[~2012-02-02 23:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 23:56 [PATCH 0/3] Updates for SGI UV1/UV2 systems Mike Travis
2012-02-02 23:56 ` [PATCH 1/3] x86 PCI: Fix identity mapping for sandy bridge Mike Travis
2012-02-22 20:20 ` Andrew Morton
2012-02-02 23:56 ` Mike Travis [this message]
2012-02-02 23:56 ` [PATCH 3/3] UV Update NMI handlers Mike Travis
2012-02-03 7:31 ` Ingo Molnar
2012-02-10 21:43 ` Don Zickus
2012-02-03 21:00 ` [PATCH 1/3] x86 PCI: Fix identity mapping for sandy bridge Mike Travis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120202235650.884390443@gulag1.americas.sgi.com \
--to=travis@sgi.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=steiner@sgi.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®