From: Daniel Vetter <daniel@ffwll.ch>
To: Jiri Slaby <jslaby@suse.cz>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
Chris Wilson <chris@chris-wilson.co.uk>,
Jiri Slaby <jirislaby@gmail.com>,
LKML <linux-kernel@vger.kernel.org>,
dri-devel@lists.freedesktop.org, daniel@ffwll.ch
Subject: Re: i915_driver_irq_handler: irq 42: nobody cared
Date: Tue, 10 Apr 2012 22:32:12 +0200 [thread overview]
Message-ID: <20120410203212.GN4115@phenom.ffwll.local> (raw)
In-Reply-To: <4F848F88.7060009@suse.cz>
On Tue, Apr 10, 2012 at 09:52:40PM +0200, Jiri Slaby wrote:
> On 04/10/2012 08:34 PM, Jesse Barnes wrote:
> > On Tue, 10 Apr 2012 20:11:29 +0200 Jiri Slaby <jslaby@suse.cz>
> > wrote:
> >
> >> On 04/10/2012 06:26 PM, Jesse Barnes wrote:
> >>> So port hotplug is always reporting that port C has a hotplug
> >>> interrupt though... If you write 0x3 back to it does the
> >>> interrupt stop?
> >>
> >> I'm not sure I got it right. This doesn't help: ---
> >> a/drivers/gpu/drm/i915/i915_irq.c +++
> >> b/drivers/gpu/drm/i915/i915_irq.c @@ -1416,6 +1416,17 @@ static
> >> irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) iir = new_iir;
> >> }
> >>
> >> + if (ret == IRQ_NONE) { + u32 hp =
> >> I915_READ(PORT_HOTPLUG_STAT); + if (hp) { +
> >> I915_WRITE(PORT_HOTPLUG_STAT, hp); +
> >> I915_READ(PORT_HOTPLUG_STAT); + } + +
> >> if (printk_ratelimit()) + printk(KERN_DEBUG
> >> "%s: %.8x\n", __func__, hp); + + }
> >>
> >> return ret; }
> >
> > Yeah that looks right, you still get 0x300?
>
> Yes.
>
> > You could try masking hotplug interrupts altogether.
>
> This doesn't help:
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2049,7 +2051,7 @@ static int i915_driver_irq_postinstall(struct
> drm_device *dev)
> I915_WRITE(IER, enable_mask);
> POSTING_READ(IER);
>
> - if (I915_HAS_HOTPLUG(dev)) {
> + if (0 && I915_HAS_HOTPLUG(dev)) {
> u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
>
> /* Note HDMI and DP share bits */
>
>
> > Also, just to sanity check things, can you look at the output of
> > "lspci -s 02.0 -vvv -xxx" and see if the "INTx" field is + or -?
> > If it's +, then the interrupt is definitely coming from an un-acked
> > IRQ source on the gfx device. If it's INTx-, it means something in
> > one of the upper MSI layers isn't getting handled right.
>
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> I tried 3.2 and 3.3. Although the spurious interrupts were always
> there, they occurred with frequency lower by a magnitude (15 vs. 300
> after X starts). So I bisected that and it lead to a commit which
> fixes bad tiling for me:
> http://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=for-jiri&id=79710e6ccabdac80c65cd13b944695ecc3e42a9d
Pipelined fencing is pretty much just broken and we'll completely rip it
out in 3.5. Does this also happen with 3.4-rc2?
-Daniel
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48
next prev parent reply other threads:[~2012-04-10 20:31 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4F717CE3.4040206@suse.cz>
2012-03-27 8:42 ` Jiri Slaby
2012-03-30 9:59 ` Jiri Slaby
2012-03-30 10:45 ` Chris Wilson
2012-03-30 12:11 ` Jiri Slaby
2012-03-30 12:24 ` Chris Wilson
2012-04-06 21:31 ` i915_driver_irq_handler: irq 42: nobody cared [generic IRQ handling broken?] Jiri Slaby
2012-04-06 22:40 ` Thomas Gleixner
2012-04-09 17:12 ` Jesse Barnes
2012-04-09 17:52 ` Dave Airlie
2012-04-10 8:44 ` Jiri Slaby
2012-04-10 8:50 ` Daniel Vetter
2012-04-10 8:52 ` i915_driver_irq_handler: irq 42: nobody cared Jiri Slaby
2012-04-10 16:50 ` Marcin Slusarz
2012-04-09 17:11 ` Jesse Barnes
2012-04-10 8:47 ` Jiri Slaby
2012-04-10 8:58 ` Daniel Vetter
2012-04-10 9:48 ` Jiri Slaby
2012-04-10 16:26 ` Jesse Barnes
2012-04-10 18:11 ` Jiri Slaby
2012-04-10 18:34 ` Jesse Barnes
2012-04-10 19:52 ` Jiri Slaby
2012-04-10 20:32 ` Daniel Vetter [this message]
2012-04-10 20:34 ` Jesse Barnes
2012-04-11 10:40 ` Daniel Vetter
2012-05-03 19:56 ` Jiri Slaby
2012-05-03 21:15 ` Daniel Vetter
2012-05-03 21:16 ` Jiri Slaby
2012-05-03 21:54 ` Jesse Barnes
2012-05-03 23:15 ` Ben Widawsky
2012-04-11 6:29 ` Michel Dänzer
2012-04-11 16:03 ` Jesse Barnes
[not found] ` <20120327085749.GE4276@phenom.ffwll.local>
2012-03-27 10:54 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120410203212.GN4115@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=chris@chris-wilson.co.uk \
--cc=dri-devel@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
--cc=jirislaby@gmail.com \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®