From: "Henrik Rydberg" <rydberg@euromail.se>
To: Daniel Kurtz <djkurtz@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Nick Dyer <nick.dyer@itdev.co.uk>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Benson Leung <bleung@chromium.org>,
Yufeng Shen <miletus@chromium.org>
Subject: Re: [PATCH 09/16 v2] Input: atmel_mxt_ts - optimize writing of object table entries
Date: Fri, 13 Apr 2012 11:13:30 +0200 [thread overview]
Message-ID: <20120413091330.GB3923@polaris.bitmath.org> (raw)
In-Reply-To: <1333039766-8617-10-git-send-email-djkurtz@chromium.org>
Hi Daniel,
> Write each object using a single bulk i2c write transfer.
>
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 28 ++++++++++++++--------------
> 1 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index a865967..3abc5b0 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -628,33 +628,33 @@ end:
> static int mxt_check_reg_init(struct mxt_data *data)
> {
> const struct mxt_platform_data *pdata = data->pdata;
> - struct mxt_object *object;
> struct device *dev = &data->client->dev;
> - int index = 0;
> - int i, j, config_offset, config_size;
> + int i, offset;
> + int ret;
>
> if (!pdata->config) {
> dev_dbg(dev, "No cfg data defined, skipping reg init\n");
> return 0;
> }
>
> - for (i = 0; i < data->info.object_num; i++) {
> - object = data->object_table + i;
> + for (offset = 0, i = 0; i < data->info.object_num; i++) {
> + struct mxt_object *object = &data->object_table[i];
> + size_t config_size;
>
> if (!mxt_object_writable(object->type))
> continue;
>
> config_size = object->size * object->instances;
> - for (j = 0; j < config_size; j++) {
> - config_offset = index + j;
> - if (config_offset > pdata->config_length) {
> - dev_err(dev, "Not enough config data!\n");
> - return -EINVAL;
> - }
> - mxt_write_object(data, object->type, j,
> - pdata->config[config_offset]);
> + if (offset + config_size > pdata->config_length) {
> + dev_err(dev, "Not enough config data!\n");
> + return -EINVAL;
> }
> - index += config_size;
> +
> + ret = mxt_write_reg(data->client, object->start_address,
> + config_size, &pdata->config[offset]);
How big is config_size? Removing the need for a stack copy here would
be better, see patch 11.
> + if (ret)
> + return ret;
> + offset += config_size;
> }
>
> return 0;
> --
> 1.7.7.3
>
Thanks,
Henrik
next prev parent reply other threads:[~2012-04-13 9:10 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-29 16:49 [PATCH 00/16 v2] cleanup atmel_mxt_ts Daniel Kurtz
2012-03-29 16:49 ` [PATCH 01/16 v2] Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Daniel Kurtz
2012-03-29 16:49 ` [PATCH 02/16 v2] Input: atmel_mxt_ts - only allow root to update firmware Daniel Kurtz
2012-03-29 16:49 ` [PATCH 03/16 v2] Input: atmel_mxt_ts - refactor mxt_read/write_reg to take a length Daniel Kurtz
2012-04-11 9:05 ` Henrik Rydberg
2012-04-14 4:12 ` Daniel Kurtz
2012-03-29 16:49 ` [PATCH 04/16 v2] Input: atmel_mxt_ts - store actual size and instance Daniel Kurtz
2012-03-29 16:49 ` [PATCH 05/16 v2] Input: atmel_mxt_ts - verify object size in mxt_write_object Daniel Kurtz
2012-03-29 16:49 ` [PATCH 06/16 v2] Input: atmel_mxt_ts - do not read extra (checksum) byte Daniel Kurtz
2012-03-29 16:49 ` [PATCH 07/16 v2] Input: atmel_mxt_ts - dump each message on just 1 line Daniel Kurtz
2012-03-29 16:49 ` [PATCH 08/16 v2] Input: atmel_mxt_ts - refactor mxt_object_show Daniel Kurtz
2012-04-11 16:25 ` Henrik Rydberg
2012-03-29 16:49 ` [PATCH 09/16 v2] Input: atmel_mxt_ts - optimize writing of object table entries Daniel Kurtz
2012-04-13 9:13 ` Henrik Rydberg [this message]
2012-03-29 16:49 ` [PATCH 10/16 v2] Input: atmel_mxt_ts - refactor get info Daniel Kurtz
2012-03-29 16:49 ` [PATCH 11/16 v2] Input: atmel_mxt_ts - refactor reading object table Daniel Kurtz
2012-04-13 9:11 ` Henrik Rydberg
2012-04-13 9:21 ` Daniel Kurtz
2012-04-13 9:34 ` Henrik Rydberg
2012-04-13 10:10 ` Daniel Kurtz
2012-04-13 11:09 ` Henrik Rydberg
2012-03-29 16:49 ` [PATCH 12/16 v2] Input: atmel_mxt_ts - simplify event reporting Daniel Kurtz
2012-03-29 16:49 ` [PATCH 13/16 v2] Input: atmel_mxt_ts - cache T9 reportid range when reading object table Daniel Kurtz
2012-03-29 16:49 ` [PATCH 14/16 v2] Input: atmel_mxt_ts - parse vector field of data packets Daniel Kurtz
2012-03-29 16:49 ` [PATCH 15/16 v2] Input: atmel_mxt_ts - send all MT-B slots in one input report Daniel Kurtz
2012-04-13 9:20 ` Henrik Rydberg
2012-03-29 16:49 ` [PATCH 16/16 v2] Input: atmel_mxt_ts - parse T6 reports Daniel Kurtz
2012-04-09 13:14 ` [PATCH 00/16 v2] cleanup atmel_mxt_ts Daniel Kurtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120413091330.GB3923@polaris.bitmath.org \
--to=rydberg@euromail.se \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miletus@chromium.org \
--cc=nick.dyer@itdev.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®