mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Eric.Moore@lsi.com, akpm@linux-foundation.org
Cc: DL-MPTFusionLinux@lsi.com, linux-scsi@vger.kernel.org,
	support@lsi.com, linux-kernel@vger.kernel.org
Subject: [PATCH v3 resend] fusion: use pci_dev->revision
Date: Mon, 14 May 2012 17:50:41 +0400	[thread overview]
Message-ID: <201205141750.41522.sshtylyov@ru.mvista.com> (raw)

This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it wasn't
converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all
drivers to use pci_device->revision).

In one case, it even reads PCI revision ID without using it -- that code is now
removed...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com>

---
This patch is refreshed against the recent Linus' tree.

This patch hasn't been applied to 3.1, 3.2, 3.3, or 3.4. Hopefully it can be
applied to 3.5 at last...

Andrew M., maybe you can take it if the maintainers don't seem to be bothered?

 drivers/message/fusion/mptbase.c |   12 ++++--------
 drivers/message/fusion/mptctl.c  |    4 +---
 2 files changed, 5 insertions(+), 11 deletions(-)

Index: linux-2.6/drivers/message/fusion/mptbase.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptbase.c
+++ linux-2.6/drivers/message/fusion/mptbase.c
@@ -1652,7 +1652,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 	unsigned long	 port;
 	u32		 msize;
 	u32		 psize;
-	u8		 revision;
 	int		 r = -ENODEV;
 	struct pci_dev *pdev;
 
@@ -1669,8 +1668,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 		return r;
 	}
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-
 	if (sizeof(dma_addr_t) > 4) {
 		const uint64_t required_mask = dma_get_required_mask
 		    (&pdev->dev);
@@ -1778,7 +1775,6 @@ mpt_attach(struct pci_dev *pdev, const s
 	MPT_ADAPTER	*ioc;
 	u8		 cb_idx;
 	int		 r = -ENODEV;
-	u8		 revision;
 	u8		 pcixcmd;
 	static int	 mpt_ids = 0;
 #ifdef CONFIG_PROC_FS
@@ -1886,8 +1882,8 @@ mpt_attach(struct pci_dev *pdev, const s
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
 	    ioc->name, &ioc->facts, &ioc->pfacts[0]));
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-	mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
+	mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision,
+			     ioc->prod_name);
 
 	switch (pdev->device)
 	{
@@ -1902,7 +1898,7 @@ mpt_attach(struct pci_dev *pdev, const s
 		break;
 
 	case MPI_MANUFACTPAGE_DEVICEID_FC929X:
-		if (revision < XL_929) {
+		if (pdev->revision < XL_929) {
 			/* 929X Chip Fix. Set Split transactions level
 		 	* for PCIX. Set MOST bits to zero.
 		 	*/
@@ -1933,7 +1929,7 @@ mpt_attach(struct pci_dev *pdev, const s
 		/* 1030 Chip Fix. Disable Split transactions
 		 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
 		 */
-		if (revision < C0_1030) {
+		if (pdev->revision < C0_1030) {
 			pci_read_config_byte(pdev, 0x6a, &pcixcmd);
 			pcixcmd &= 0x8F;
 			pci_write_config_byte(pdev, 0x6a, pcixcmd);
Index: linux-2.6/drivers/message/fusion/mptctl.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptctl.c
+++ linux-2.6/drivers/message/fusion/mptctl.c
@@ -1250,7 +1250,6 @@ mptctl_getiocinfo (unsigned long arg, un
 	int			iocnum;
 	unsigned int		port;
 	int			cim_rev;
-	u8			revision;
 	struct scsi_device 	*sdev;
 	VirtDevice		*vdevice;
 
@@ -1324,8 +1323,7 @@ mptctl_getiocinfo (unsigned long arg, un
 	pdev = (struct pci_dev *) ioc->pcidev;
 
 	karg->pciId = pdev->device;
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-	karg->hwRev = revision;
+	karg->hwRev = pdev->revision;
 	karg->subSystemDevice = pdev->subsystem_device;
 	karg->subSystemVendor = pdev->subsystem_vendor;
 

                 reply	other threads:[~2012-05-14 13:58 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201205141750.41522.sshtylyov@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=DL-MPTFusionLinux@lsi.com \
    --cc=Eric.Moore@lsi.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=support@lsi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome