mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
To: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>, Ingo Molnar <mingo@elte.hu>,
	Peter Zijlstra <peterz@infradead.org>,
	Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
	Anton Arapov <anton@redhat.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] uprobes: write_opcode()->__replace_page() can race with try_to_unmap()
Date: Fri, 15 Jun 2012 11:42:17 +0530	[thread overview]
Message-ID: <20120615061217.GC12051@linux.vnet.ibm.com> (raw)
In-Reply-To: <20120608165551.GA30683@redhat.com>

> ---
> Subject: [PATCH] uprobes: write_opcode()->__replace_page() can race with try_to_unmap()
> 
> write_opcode() gets old_page via get_user_pages() and then calls
> __replace_page() which assumes that this old_page is still mapped
> after pte_offset_map_lock().
> 
> This is not true if this old_page was already try_to_unmap()'ed,
> and in this case everything __replace_page() does with old_page
> is wrong. Just for example, put_page() is not balanced.
> 
> I think it is possible to teach __replace_page() to handle this
> unlikely case correctly, but this patch simply changes it to use
> page_check_address() and return -EAGAIN if it fails. The caller
> should notice this error code and retry.
> 
> Note: write_opcode() asks for the cleanups, I'll try to do this
> in a separate patch.
> 
> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
> ---
>  kernel/events/uprobes.c |   41 +++++++++++++----------------------------
>  1 files changed, 13 insertions(+), 28 deletions(-)
> 
> diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
> index 9c53bc2..54c8780 100644
> --- a/kernel/events/uprobes.c
> +++ b/kernel/events/uprobes.c
> @@ -135,33 +135,17 @@ static loff_t vma_address(struct vm_area_struct *vma, loff_t offset)
>  static int __replace_page(struct vm_area_struct *vma, struct page *page, struct page *kpage)
>  {
>  	struct mm_struct *mm = vma->vm_mm;
> -	pgd_t *pgd;
> -	pud_t *pud;
> -	pmd_t *pmd;
> -	pte_t *ptep;
> -	spinlock_t *ptl;
>  	unsigned long addr;
> -	int err = -EFAULT;
> +	spinlock_t *ptl;
> +	pte_t *ptep;
> 
>  	addr = page_address_in_vma(page, vma);
>  	if (addr == -EFAULT)
> -		goto out;
> -
> -	pgd = pgd_offset(mm, addr);
> -	if (!pgd_present(*pgd))
> -		goto out;
> -
> -	pud = pud_offset(pgd, addr);
> -	if (!pud_present(*pud))
> -		goto out;
> +		return -EFAULT;
> 
> -	pmd = pmd_offset(pud, addr);
> -	if (!pmd_present(*pmd))
> -		goto out;
> -
> -	ptep = pte_offset_map_lock(mm, pmd, addr, &ptl);
> +	ptep = page_check_address(page, mm, addr, &ptl, 0);
>  	if (!ptep)
> -		goto out;
> +		return -EAGAIN;
> 
>  	get_page(kpage);
>  	page_add_new_anon_rmap(kpage, vma, addr);
> @@ -180,10 +164,8 @@ static int __replace_page(struct vm_area_struct *vma, struct page *page, struct
>  		try_to_free_swap(page);
>  	put_page(page);
>  	pte_unmap_unlock(ptep, ptl);
> -	err = 0;
> 
> -out:
> -	return err;
> +	return 0;
>  }
> 
>  /**
> @@ -228,9 +210,10 @@ static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
>  	void *vaddr_old, *vaddr_new;
>  	struct vm_area_struct *vma;
>  	struct uprobe *uprobe;
> +	unsigned long pgoff;
>  	loff_t addr;
>  	int ret;
> -
> +retry:

Just a check on coding style: Shouldnt we have a preceeding blank
line before the goto label.

>  	/* Read the page with vaddr into memory */
>  	ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &old_page, &vma);
>  	if (ret <= 0)
> @@ -275,9 +258,9 @@ static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
>  	memcpy(vaddr_new, vaddr_old, PAGE_SIZE);
> 
>  	/* poke the new insn in, ASSUMES we don't cross page boundary */
> -	vaddr &= ~PAGE_MASK;
> -	BUG_ON(vaddr + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
> -	memcpy(vaddr_new + vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
> +	pgoff = (vaddr & ~PAGE_MASK);
> +	BUG_ON(pgoff + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
> +	memcpy(vaddr_new + pgoff, &opcode, UPROBE_SWBP_INSN_SIZE);
> 
>  	kunmap_atomic(vaddr_new);
>  	kunmap_atomic(vaddr_old);
> @@ -297,6 +280,8 @@ unlock_out:
>  put_out:
>  	put_page(old_page);
> 
> +	if (unlikely(ret == -EAGAIN))
> +		goto retry;
>  	return ret;
>  }
> 

Looks good. 
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

-- 
Thanks and Regards
Srikar


  reply	other threads:[~2012-06-15  6:16 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-07 16:59 [PATCH 0/3] uprobes fixes for 3.5 Oleg Nesterov
2012-06-07 17:00 ` [PATCH 1/3] uprobes: valid_vma() should reject VM_HUGETLB Oleg Nesterov
2012-06-15  6:22   ` Srikar Dronamraju
2012-06-07 17:00 ` [PATCH 2/3] uprobes: __copy_insn() should ensure a_ops->readpage != NULL Oleg Nesterov
2012-06-15  6:25   ` Srikar Dronamraju
2012-06-15 12:10     ` Ingo Molnar
2012-06-07 17:00 ` [PATCH 3/3] uprobes: write_opcode()->__replace_page() can race with try_to_unmap() Oleg Nesterov
2012-06-08  8:47   ` Peter Zijlstra
2012-06-08 10:03     ` Oleg Nesterov
2012-06-08 16:55   ` Oleg Nesterov
2012-06-15  6:12     ` Srikar Dronamraju [this message]
2012-06-15 12:11       ` Ingo Molnar
2012-06-15 15:48         ` Oleg Nesterov
2012-06-16  7:11           ` Ingo Molnar
2012-06-08 14:03 ` oom-killer is crazy? (Was: [PATCH 0/3] uprobes fixes for 3.5) Oleg Nesterov
2012-06-08 14:26   ` Dave Jones
2012-06-08 15:04     ` Oleg Nesterov
2012-06-08 20:21       ` [patch for-3.5-rc1] mm, oom: fix badness score underflow David Rientjes
2012-06-09 22:25         ` KOSAKI Motohiro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120615061217.GC12051@linux.vnet.ibm.com \
    --to=srikar@linux.vnet.ibm.com \
    --cc=ananth@in.ibm.com \
    --cc=anton@redhat.com \
    --cc=hughd@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masami.hiramatsu.pt@hitachi.com \
    --cc=mingo@elte.hu \
    --cc=oleg@redhat.com \
    --cc=peterz@infradead.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome