From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<fmhess@users.sourceforge.net>, <gregkh@linuxfoundation.org>
Subject: [PATCH 07/33] staging: comedi: cb_das16_cs: remove some useless comments
Date: Mon, 25 Jun 2012 16:10:37 -0700 [thread overview]
Message-ID: <201206251610.38013.hartleys@visionengravers.com> (raw)
Remove some useless comments and whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/cb_das16_cs.c | 61 ++++++----------------------
1 file changed, 13 insertions(+), 48 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 2ac30f4..2063215 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -19,6 +19,13 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ PCMCIA support code for the is adapted from the dummy_cs.c driver
+ of the Linux PCMCIA Card Services package.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
*/
/*
Driver: cb_das16_cs
@@ -616,58 +623,20 @@ static int das16cs_timer_insn_config(struct comedi_device *dev,
return -EINVAL;
}
-/* PCMCIA stuff */
-
-/*======================================================================
-
- The following pcmcia code for the pcm-das08 is adapted from the
- dummy_cs.c driver of the Linux PCMCIA Card Services package.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
-======================================================================*/
-
static void das16cs_pcmcia_config(struct pcmcia_device *link);
static void das16cs_pcmcia_release(struct pcmcia_device *link);
static int das16cs_pcmcia_suspend(struct pcmcia_device *p_dev);
static int das16cs_pcmcia_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int das16cs_pcmcia_attach(struct pcmcia_device *);
static void das16cs_pcmcia_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- das16cs_pcmcia_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int das16cs_pcmcia_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -686,7 +655,7 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
das16cs_pcmcia_config(link);
return 0;
-} /* das16cs_pcmcia_attach */
+}
static void das16cs_pcmcia_detach(struct pcmcia_device *link)
{
@@ -696,8 +665,7 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link)
das16cs_pcmcia_release(link);
/* This points to the parent struct local_info_t struct */
kfree(link->priv);
-} /* das16cs_pcmcia_detach */
-
+}
static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
@@ -734,13 +702,13 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
failed:
das16cs_pcmcia_release(link);
-} /* das16cs_pcmcia_config */
+}
static void das16cs_pcmcia_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "das16cs_pcmcia_release\n");
pcmcia_disable_device(link);
-} /* das16cs_pcmcia_release */
+}
static int das16cs_pcmcia_suspend(struct pcmcia_device *link)
{
@@ -750,7 +718,7 @@ static int das16cs_pcmcia_suspend(struct pcmcia_device *link)
local->stop = 1;
return 0;
-} /* das16cs_pcmcia_suspend */
+}
static int das16cs_pcmcia_resume(struct pcmcia_device *link)
{
@@ -758,16 +726,13 @@ static int das16cs_pcmcia_resume(struct pcmcia_device *link)
local->stop = 0;
return 0;
-} /* das16cs_pcmcia_resume */
-
-/*====================================================================*/
+}
static const struct pcmcia_device_id das16cs_id_table[] = {
PCMCIA_DEVICE_MANF_CARD(0x01c5, 0x0039),
PCMCIA_DEVICE_MANF_CARD(0x01c5, 0x4009),
PCMCIA_DEVICE_NULL
};
-
MODULE_DEVICE_TABLE(pcmcia, das16cs_id_table);
static struct pcmcia_driver das16cs_driver = {
--
1.7.11
next reply other threads:[~2012-06-25 23:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-25 23:10 H Hartley Sweeten [this message]
2012-06-26 8:51 ` Ian Abbott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206251610.38013.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=fmhess@users.sourceforge.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®