mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
	<fmhess@users.sourceforge.net>, <gregkh@linuxfoundation.org>
Subject: [PATCH 09/36] staging: comedi: cb_pcidas: remove forward declarations 9
Date: Tue, 26 Jun 2012 17:51:53 -0700	[thread overview]
Message-ID: <201206261751.53541.hartleys@visionengravers.com> (raw)

Move the nvram_read function, and its helper, to remove the need
for the last of the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/comedi/drivers/cb_pcidas.c | 81 ++++++++++++++----------------
 1 file changed, 39 insertions(+), 42 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 9c7f24a..5c3758c 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -447,9 +447,6 @@ struct cb_pcidas_private {
  */
 #define devpriv ((struct cb_pcidas_private *)dev->private)
 
-static int nvram_read(struct comedi_device *dev, unsigned int address,
-		      uint8_t *data);
-
 static inline unsigned int cal_enable_bits(struct comedi_device *dev)
 {
 	return CAL_EN_BIT | CAL_SRC_BITS(devpriv->calibration_source);
@@ -617,6 +614,45 @@ static int cb_pcidas_ao_readback_insn(struct comedi_device *dev,
 	return 1;
 }
 
+static int wait_for_nvram_ready(unsigned long s5933_base_addr)
+{
+	static const int timeout = 1000;
+	unsigned int i;
+
+	for (i = 0; i < timeout; i++) {
+		if ((inb(s5933_base_addr +
+			 AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY)
+		    == 0)
+			return 0;
+		udelay(1);
+	}
+	return -1;
+}
+
+static int nvram_read(struct comedi_device *dev, unsigned int address,
+			uint8_t *data)
+{
+	unsigned long iobase = devpriv->s5933_config;
+
+	if (wait_for_nvram_ready(iobase) < 0)
+		return -ETIMEDOUT;
+
+	outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_LOW_ADDR,
+	     iobase + AMCC_OP_REG_MCSR_NVCMD);
+	outb(address & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA);
+	outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_HIGH_ADDR,
+	     iobase + AMCC_OP_REG_MCSR_NVCMD);
+	outb((address >> 8) & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA);
+	outb(MCSR_NV_ENABLE | MCSR_NV_READ, iobase + AMCC_OP_REG_MCSR_NVCMD);
+
+	if (wait_for_nvram_ready(iobase) < 0)
+		return -ETIMEDOUT;
+
+	*data = inb(iobase + AMCC_OP_REG_MCSR_NVDATA);
+
+	return 0;
+}
+
 static int eeprom_read_insn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -1543,45 +1579,6 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static int wait_for_nvram_ready(unsigned long s5933_base_addr)
-{
-	static const int timeout = 1000;
-	unsigned int i;
-
-	for (i = 0; i < timeout; i++) {
-		if ((inb(s5933_base_addr +
-			 AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY)
-		    == 0)
-			return 0;
-		udelay(1);
-	}
-	return -1;
-}
-
-static int nvram_read(struct comedi_device *dev, unsigned int address,
-			uint8_t *data)
-{
-	unsigned long iobase = devpriv->s5933_config;
-
-	if (wait_for_nvram_ready(iobase) < 0)
-		return -ETIMEDOUT;
-
-	outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_LOW_ADDR,
-	     iobase + AMCC_OP_REG_MCSR_NVCMD);
-	outb(address & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA);
-	outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_HIGH_ADDR,
-	     iobase + AMCC_OP_REG_MCSR_NVCMD);
-	outb((address >> 8) & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA);
-	outb(MCSR_NV_ENABLE | MCSR_NV_READ, iobase + AMCC_OP_REG_MCSR_NVCMD);
-
-	if (wait_for_nvram_ready(iobase) < 0)
-		return -ETIMEDOUT;
-
-	*data = inb(iobase + AMCC_OP_REG_MCSR_NVDATA);
-
-	return 0;
-}
-
 static int cb_pcidas_attach(struct comedi_device *dev,
 			    struct comedi_devconfig *it)
 {
-- 
1.7.11


                 reply	other threads:[~2012-06-27  0:51 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201206261751.53541.hartleys@visionengravers.com \
    --to=hartleys@visionengravers.com \
    --cc=abbotti@mev.co.uk \
    --cc=devel@driverdev.osuosl.org \
    --cc=fmhess@users.sourceforge.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®