mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
	<fmhess@users.sourceforge.net>, <gregkh@linuxfoundation.org>
Subject: [PATCH 29/36] staging: comedi: cb_pcidas: fix comments in private data struct
Date: Tue, 26 Jun 2012 18:07:32 -0700	[thread overview]
Message-ID: <201206261807.32557.hartleys@visionengravers.com> (raw)

A number of the comments in the private data struct definition
are causing checkpatch.pl to complain about "WARNING: line over
80 characters". Fix the comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/comedi/drivers/cb_pcidas.c | 31 +++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index eba39b4..9e21e68 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -342,34 +342,35 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
 	},
 };
 
-/* this structure is for data unique to this hardware driver.  If
-   several hardware drivers keep similar information in this structure,
-   feel free to suggest moving the variable to the struct comedi_device struct.  */
 struct cb_pcidas_private {
-	/* would be useful for a PCI device */
 	struct pci_dev *pci_dev;
-	/*  base addresses */
+	/* base addresses */
 	unsigned long s5933_config;
 	unsigned long control_status;
 	unsigned long adc_fifo;
 	unsigned long pacer_counter_dio;
 	unsigned long ao_registers;
-	/*  divisors of master clock for analog input pacing */
+	/* divisors of master clock for analog input pacing */
 	unsigned int divisor1;
 	unsigned int divisor2;
-	unsigned int count;	/*  number of analog input samples remaining */
-	unsigned int adc_fifo_bits;	/*  bits to write to interrupt/adcfifo register */
-	unsigned int s5933_intcsr_bits;	/*  bits to write to amcc s5933 interrupt control/status register */
-	unsigned int ao_control_bits;	/*  bits to write to ao control and status register */
+	/* number of analog input samples remaining */
+	unsigned int count;
+	/* bits to write to registers */
+	unsigned int adc_fifo_bits;
+	unsigned int s5933_intcsr_bits;
+	unsigned int ao_control_bits;
+	/* fifo buffers */
 	short ai_buffer[AI_BUFFER_SIZE];
 	short ao_buffer[AO_BUFFER_SIZE];
-	/*  divisors of master clock for analog output pacing */
+	/* divisors of master clock for analog output pacing */
 	unsigned int ao_divisor1;
 	unsigned int ao_divisor2;
-	unsigned int ao_count;	/*  number of analog output samples remaining */
-	int ao_value[2];	/*  remember what the analog outputs are set to, to allow readback */
-	unsigned int caldac_value[NUM_CHANNELS_8800];	/*  for readback of caldac */
-	unsigned int trimpot_value[NUM_CHANNELS_8402];	/*  for readback of trimpot */
+	/* number of analog output samples remaining */
+	unsigned int ao_count;
+	/* cached values for readback */
+	int ao_value[2];
+	unsigned int caldac_value[NUM_CHANNELS_8800];
+	unsigned int trimpot_value[NUM_CHANNELS_8402];
 	unsigned int dac08_value;
 	unsigned int calibration_source;
 };
-- 
1.7.11


                 reply	other threads:[~2012-06-27  1:07 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201206261807.32557.hartleys@visionengravers.com \
    --to=hartleys@visionengravers.com \
    --cc=abbotti@mev.co.uk \
    --cc=devel@driverdev.osuosl.org \
    --cc=fmhess@users.sourceforge.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®