mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ben Hutchings <ben@decadent.org.uk>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
	alan@lxorguk.ukuu.org.uk, Thomas Graf <tgraf@suug.ch>,
	"David S. Miller" <davem@davemloft.net>
Subject: [ 39/48] ipv6: Move ipv6 proc file registration to end of init  order
Date: Mon, 09 Jul 2012 15:31:55 +0100	[thread overview]
Message-ID: <20120709143122.271968053@decadent.org.uk> (raw)
In-Reply-To: <20120709143116.348975190@decadent.org.uk>

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Graf <tgraf@suug.ch>

[ Upstream commit d189634ecab947c10f6f832258b103d0bbfe73cc ]

/proc/net/ipv6_route reflects the contents of fib_table_hash. The proc
handler is installed in ip6_route_net_init() whereas fib_table_hash is
allocated in fib6_net_init() _after_ the proc handler has been installed.

This opens up a short time frame to access fib_table_hash with its pants
down.

Move the registration of the proc files to a later point in the init
order to avoid the race.

Tested :-)

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/ipv6/route.c |   41 +++++++++++++++++++++++++++++++----------
 1 file changed, 31 insertions(+), 10 deletions(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 059b9d9..2e21751 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2881,10 +2881,6 @@ static int __net_init ip6_route_net_init(struct net *net)
 	net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ;
 	net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40;
 
-#ifdef CONFIG_PROC_FS
-	proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
-	proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
 	net->ipv6.ip6_rt_gc_expire = 30*HZ;
 
 	ret = 0;
@@ -2905,10 +2901,6 @@ out_ip6_dst_ops:
 
 static void __net_exit ip6_route_net_exit(struct net *net)
 {
-#ifdef CONFIG_PROC_FS
-	proc_net_remove(net, "ipv6_route");
-	proc_net_remove(net, "rt6_stats");
-#endif
 	kfree(net->ipv6.ip6_null_entry);
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 	kfree(net->ipv6.ip6_prohibit_entry);
@@ -2917,11 +2909,33 @@ static void __net_exit ip6_route_net_exit(struct net *net)
 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
 }
 
+static int __net_init ip6_route_net_init_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+	proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
+	proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
+#endif
+	return 0;
+}
+
+static void __net_exit ip6_route_net_exit_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+	proc_net_remove(net, "ipv6_route");
+	proc_net_remove(net, "rt6_stats");
+#endif
+}
+
 static struct pernet_operations ip6_route_net_ops = {
 	.init = ip6_route_net_init,
 	.exit = ip6_route_net_exit,
 };
 
+static struct pernet_operations ip6_route_net_late_ops = {
+	.init = ip6_route_net_init_late,
+	.exit = ip6_route_net_exit_late,
+};
+
 static struct notifier_block ip6_route_dev_notifier = {
 	.notifier_call = ip6_route_dev_notify,
 	.priority = 0,
@@ -2971,19 +2985,25 @@ int __init ip6_route_init(void)
 	if (ret)
 		goto xfrm6_init;
 
+	ret = register_pernet_subsys(&ip6_route_net_late_ops);
+	if (ret)
+		goto fib6_rules_init;
+
 	ret = -ENOBUFS;
 	if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) ||
 	    __rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) ||
 	    __rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL))
-		goto fib6_rules_init;
+		goto out_register_late_subsys;
 
 	ret = register_netdevice_notifier(&ip6_route_dev_notifier);
 	if (ret)
-		goto fib6_rules_init;
+		goto out_register_late_subsys;
 
 out:
 	return ret;
 
+out_register_late_subsys:
+	unregister_pernet_subsys(&ip6_route_net_late_ops);
 fib6_rules_init:
 	fib6_rules_cleanup();
 xfrm6_init:
@@ -3002,6 +3022,7 @@ out_kmem_cache:
 void ip6_route_cleanup(void)
 {
 	unregister_netdevice_notifier(&ip6_route_dev_notifier);
+	unregister_pernet_subsys(&ip6_route_net_late_ops);
 	fib6_rules_cleanup();
 	xfrm6_fini();
 	fib6_gc_cleanup();



  parent reply	other threads:[~2012-07-09 14:44 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-09 14:31 [ 00/48] 3.2.23-stable review Ben Hutchings
2012-07-09 14:31 ` [ 01/48] splice: fix racy pipe->buffers uses Ben Hutchings
2012-07-09 14:31 ` [ 02/48] umem: fix up unplugging Ben Hutchings
2012-07-09 14:31 ` [ 03/48] mwifiex: fix 11n rx packet drop issue Ben Hutchings
2012-07-09 14:31 ` [ 04/48] mwifiex: fix WPS eapol handshake failure Ben Hutchings
2012-07-09 14:31 ` [ 05/48] NFC: Prevent multiple buffer overflows in NCI Ben Hutchings
2012-07-09 14:31 ` [ 06/48] ath9k: fix dynamic WEP related regression Ben Hutchings
2012-07-09 14:31 ` [ 07/48] NFC: Return from rawsock_release when sk is NULL Ben Hutchings
2012-07-09 14:31 ` [ 08/48] rtlwifi: rtl8192cu: New USB IDs Ben Hutchings
2012-07-09 14:31 ` [ 09/48] ath9k: enable serialize_regmode for non-PCIE AR9287 Ben Hutchings
2012-07-09 14:31 ` [ 10/48] mac80211: correct behaviour on unrecognised action frames Ben Hutchings
2012-07-09 14:31 ` [ 11/48] ASoC: tlv320aic3x: Fix codec pll configure bug Ben Hutchings
2012-07-09 14:31 ` [ 12/48] powerpc/xmon: Use cpumask iterator to avoid warning Ben Hutchings
2012-07-09 14:31 ` [ 13/48] powerpc/kvm: sldi should be sld Ben Hutchings
2012-07-09 14:31 ` [ 14/48] md/raid10: Dont try to recovery unmatched (and unused) chunks Ben Hutchings
2012-07-09 14:31 ` [ 15/48] md/raid5: Do not add data_offset before call to is_badblock Ben Hutchings
2012-07-09 14:31 ` [ 16/48] md/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdev Ben Hutchings
2012-07-09 14:31 ` [ 17/48] md/raid10: fix failure when trying to repair a read error Ben Hutchings
2012-07-09 14:31 ` [ 18/48] drm/i915: kick any firmware framebuffers before claiming the gtt Ben Hutchings
2012-07-09 14:31 ` [ 19/48] dm persistent data: fix shadow_info_leak on dm_tm_destroy Ben Hutchings
2012-07-09 14:31 ` [ 20/48] dm persistent data: handle space map checker creation failure Ben Hutchings
2012-07-09 14:31 ` [ 21/48] dm persistent data: fix allocation failure in space map checker init Ben Hutchings
2012-07-09 14:31 ` [ 22/48] ALSA: hda - Fix power-map regression for HP dv6 & co Ben Hutchings
2012-07-09 14:31 ` [ 23/48] tracing: change CPU ring buffer state from tracing_cpumask Ben Hutchings
2012-07-09 14:31 ` [ 24/48] mwifiex: fix wrong return values in add_virtual_intf() error cases Ben Hutchings
2012-07-09 14:31 ` [ 25/48] udf: Use ret instead of abusing i in udf_load_logicalvol() Ben Hutchings
2012-07-09 14:31 ` [ 26/48] udf: Avoid run away loop when partition table length is corrupted Ben Hutchings
2012-07-10 15:52   ` Ben Hutchings
2012-07-10 16:04     ` Jan Kara
2012-07-11  1:36       ` Ben Hutchings
2012-07-09 14:31 ` [ 27/48] udf: Fortify loading of sparing table Ben Hutchings
2012-07-09 14:31 ` [ 28/48] ARM: fix rcu stalls on SMP platforms Ben Hutchings
2012-07-09 14:31 ` [ 29/48] net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() Ben Hutchings
2012-07-09 14:31 ` [ 30/48] cipso: handle CIPSO options correctly when NetLabel is disabled Ben Hutchings
2012-07-09 14:31 ` [ 31/48] net: l2tp_eth: fix kernel panic on rmmod l2tp_eth Ben Hutchings
2012-07-09 14:31 ` [ 32/48] l2tp: fix a race in l2tp_ip_sendmsg() Ben Hutchings
2012-07-09 14:31 ` [ 33/48] sky2: fix checksum bit management on some chips Ben Hutchings
2012-07-09 14:31 ` [ 34/48] be2net: fix a race in be_xmit() Ben Hutchings
2012-07-09 14:31 ` [ 35/48] dummy: fix rcu_sched self-detected stalls Ben Hutchings
2012-07-09 23:39   ` Herton Ronaldo Krzesinski
2012-07-09 23:47     ` Ben Hutchings
2012-07-09 23:49       ` David Miller
2012-07-10  0:20         ` Ben Hutchings
2012-07-09 14:31 ` [ 36/48] bonding: Fix corrupted queue_mapping Ben Hutchings
2012-07-09 14:31 ` [ 37/48] ethtool: allow ETHTOOL_GSSET_INFO for users Ben Hutchings
2012-07-09 14:31 ` [ 38/48] netpoll: fix netpoll_send_udp() bugs Ben Hutchings
2012-07-09 14:31 ` Ben Hutchings [this message]
2012-07-09 14:31 ` [ 40/48] bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) Ben Hutchings
2012-07-09 14:31 ` [ 41/48] Btrfs: run delayed directory updates during log replay Ben Hutchings
2012-07-09 14:31 ` [ 42/48] cifs: when server doesnt set CAP_LARGE_READ_X, cap default rsize at MaxBufferSize Ben Hutchings
2012-07-09 14:31 ` [ 43/48] ocfs2: clear unaligned io flag when dio fails Ben Hutchings
2012-07-09 14:32 ` [ 44/48] aio: make kiocb->private NUll in init_sync_kiocb() Ben Hutchings
2012-07-09 14:32 ` [ 45/48] mtd: cafe_nand: fix an & vs | mistake Ben Hutchings
2012-07-09 14:32 ` [ 46/48] mm: Hold a file reference in madvise_remove Ben Hutchings
2012-07-09 14:32 ` [ 47/48] tcm_fc: Resolve suspicious RCU usage warnings Ben Hutchings
2012-07-09 14:32 ` [ 48/48] vfs: make O_PATH file descriptors usable for fchdir() Ben Hutchings
2012-07-11  1:33 ` [ 00/48] 3.2.23-stable review Ben Hutchings

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120709143122.271968053@decadent.org.uk \
    --to=ben@decadent.org.uk \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tgraf@suug.ch \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®