From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<gregkh@linuxfoundation.org>
Subject: [PATCH 20/83] staging: comedi: rtd520: remove RtdFifoStatus macro
Date: Tue, 10 Jul 2012 16:51:16 -0700 [thread overview]
Message-ID: <201207101651.16362.hartleys@visionengravers.com> (raw)
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'readl'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/rtd520.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 8e9265d..3b44776 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -406,10 +406,6 @@ struct rtdPrivate {
/* Macros to access registers */
-/* FIFO status */
-#define RtdFifoStatus(dev) \
- readl(devpriv->las0+LAS0_ADC)
-
/* pacer start/stop read=start, write=stop*/
#define RtdPacerStart(dev) \
readl(devpriv->las0+LAS0_PACER)
@@ -760,7 +756,7 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
/* trigger conversion */
writew(0, devpriv->las0 + LAS0_ADC);
udelay(1);
- fifo_status = RtdFifoStatus(dev);
+ fifo_status = readl(devpriv->las0 + LAS0_ADC);
if ((fifo_status & FS_ADC_HEMPTY) == 0) {
fifo_size = 2 * i;
break;
@@ -812,7 +808,7 @@ static int rtd_ai_rinsn(struct comedi_device *dev,
writew(0, devpriv->las0 + LAS0_ADC);
for (ii = 0; ii < RTD_ADC_TIMEOUT; ++ii) {
- stat = RtdFifoStatus(dev);
+ stat = readl(devpriv->las0 + LAS0_ADC);
if (stat & FS_ADC_NOT_EMPTY) /* 1 -> not empty */
break;
WAIT_QUIETLY;
@@ -859,7 +855,7 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
continue;
}
#if 0
- if (0 == (RtdFifoStatus(dev) & FS_ADC_NOT_EMPTY)) { /* DEBUG */
+ if (!(readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY)) {
DPRINTK("comedi: READ OOPS on %d of %d\n", ii + 1,
count);
break;
@@ -888,7 +884,7 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
*/
static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
{
- while (RtdFifoStatus(dev) & FS_ADC_NOT_EMPTY) { /* 1 -> not empty */
+ while (readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY) {
short sample;
s16 d = readw(devpriv->las1 + LAS1_ADC_FIFO);
@@ -1048,7 +1044,7 @@ static irqreturn_t rtd_interrupt(int irq, /* interrupt number (ignored) */
devpriv->intCount++; /* DEBUG statistics */
- fifoStatus = RtdFifoStatus(dev);
+ fifoStatus = readl(devpriv->las0 + LAS0_ADC);
/* check for FIFO full, this automatically halts the ADC! */
if (!(fifoStatus & FS_ADC_NOT_FULL)) { /* 0 -> full */
DPRINTK("rtd520: FIFO full! fifo_status=0x%x\n", (fifoStatus ^ 0x6666) & 0x7777); /* should be all 0s */
@@ -1176,7 +1172,7 @@ transferDone:
#endif /* USE_DMA */
if (devpriv->aiCount > 0) { /* there shouldn't be anything left */
- fifoStatus = RtdFifoStatus(dev);
+ fifoStatus = readl(devpriv->las0 + LAS0_ADC);
DPRINTK("rtd520: Finishing up. %ld remain, fifoStat=%x\n", devpriv->aiCount, (fifoStatus ^ 0x6666) & 0x7777); /* should read all 0s */
ai_read_dregs(dev, s); /* read anything left in FIFO */
}
@@ -1189,7 +1185,7 @@ transferDone:
RtdInterruptClearMask(dev, status);
RtdInterruptClear(dev);
- fifoStatus = RtdFifoStatus(dev); /* DEBUG */
+ fifoStatus = readl(devpriv->las0 + LAS0_ADC);
DPRINTK
("rtd520: Acquisition complete. %ld ints, intStat=%x, overStat=%x\n",
devpriv->intCount, status,
@@ -1687,7 +1683,7 @@ static int rtd_ao_winsn(struct comedi_device *dev,
devpriv->aoValue[chan] = data[i]; /* save for read back */
for (ii = 0; ii < RTD_DAC_TIMEOUT; ++ii) {
- stat = RtdFifoStatus(dev);
+ stat = readl(devpriv->las0 + LAS0_ADC);
/* 1 -> not empty */
if (stat & ((0 == chan) ? FS_DAC1_NOT_EMPTY :
FS_DAC2_NOT_EMPTY))
--
1.7.11
reply other threads:[~2012-07-10 23:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207101651.16362.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome