From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<gregkh@linuxfoundation.org>
Subject: [PATCH 25/30] staging: comedi: dyna_pci10xx: use comedi_device pci_dev pointer
Date: Wed, 11 Jul 2012 15:32:52 -0700 [thread overview]
Message-ID: <201207111532.52738.hartleys@visionengravers.com> (raw)
Use the pci_dev pointer in the comedi_device struct instead of
carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/dyna_pci10xx.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index d8ce5da..16ad05f 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -102,7 +102,6 @@ static const struct boardtype boardtypes[] = {
};
struct dyna_pci10xx_private {
- struct pci_dev *pci_dev; /* ptr to PCI device */
char valid; /* card is usable */
struct mutex mutex;
@@ -272,8 +271,8 @@ static int dyna_pci10xx_attach(struct comedi_device *dev,
return -ENOMEM;
}
- devpriv->pci_dev = dyna_pci10xx_find_pci_dev(dev, it);
- if (!devpriv->pci_dev) {
+ dev->pcidev = dyna_pci10xx_find_pci_dev(dev, it);
+ if (!dev->pcidev) {
mutex_unlock(&start_stop_sem);
return -EIO;
}
@@ -281,7 +280,7 @@ static int dyna_pci10xx_attach(struct comedi_device *dev,
dev->board_name = thisboard->name;
dev->irq = 0;
- if (comedi_pci_enable(devpriv->pci_dev, DRV_NAME)) {
+ if (comedi_pci_enable(dev->pcidev, DRV_NAME)) {
printk(KERN_ERR "comedi: dyna_pci10xx: "
"failed to enable PCI device and request regions!");
mutex_unlock(&start_stop_sem);
@@ -291,12 +290,12 @@ static int dyna_pci10xx_attach(struct comedi_device *dev,
mutex_init(&devpriv->mutex);
/* initialize device base address registers */
- devpriv->BADR0 = pci_resource_start(devpriv->pci_dev, 0);
- devpriv->BADR1 = pci_resource_start(devpriv->pci_dev, 1);
- devpriv->BADR2 = pci_resource_start(devpriv->pci_dev, 2);
- devpriv->BADR3 = pci_resource_start(devpriv->pci_dev, 3);
- devpriv->BADR4 = pci_resource_start(devpriv->pci_dev, 4);
- devpriv->BADR5 = pci_resource_start(devpriv->pci_dev, 5);
+ devpriv->BADR0 = pci_resource_start(dev->pcidev, 0);
+ devpriv->BADR1 = pci_resource_start(dev->pcidev, 1);
+ devpriv->BADR2 = pci_resource_start(dev->pcidev, 2);
+ devpriv->BADR3 = pci_resource_start(dev->pcidev, 3);
+ devpriv->BADR4 = pci_resource_start(dev->pcidev, 4);
+ devpriv->BADR5 = pci_resource_start(dev->pcidev, 5);
ret = comedi_alloc_subdevices(dev, 4);
if (ret) {
@@ -356,10 +355,10 @@ static int dyna_pci10xx_attach(struct comedi_device *dev,
static void dyna_pci10xx_detach(struct comedi_device *dev)
{
- if (devpriv && devpriv->pci_dev) {
- comedi_pci_disable(devpriv->pci_dev);
+ if (dev->pcidev)
+ comedi_pci_disable(dev->pcidev);
+ if (devpriv)
mutex_destroy(&devpriv->mutex);
- }
}
static struct comedi_driver dyna_pci10xx_driver = {
--
1.7.11
reply other threads:[~2012-07-11 22:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207111532.52738.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®