[PATCH 26/30] staging: comedi: dyna_pci10xx: remove unused variables in the private data

[H Hartley Sweeten <hartleys@visionengravers.com>]

These variables are set during the attach of the device but they are
never read. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/comedi/drivers/dyna_pci10xx.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index 16ad05f..32fcaee 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -102,11 +102,10 @@ static const struct boardtype boardtypes[] = {
 };
 
 struct dyna_pci10xx_private {
-	char valid;			/*  card is usable */
 	struct mutex mutex;
 
 	/* device base address registers */
-	unsigned long BADR0, BADR1, BADR2, BADR3, BADR4, BADR5;
+	unsigned long BADR2, BADR3;
 };
 
 #define thisboard ((const struct boardtype *)dev->board_ptr)
@@ -290,12 +289,8 @@ static int dyna_pci10xx_attach(struct comedi_device *dev,
 	mutex_init(&devpriv->mutex);
 
 	/* initialize device base address registers */
-	devpriv->BADR0 = pci_resource_start(dev->pcidev, 0);
-	devpriv->BADR1 = pci_resource_start(dev->pcidev, 1);
 	devpriv->BADR2 = pci_resource_start(dev->pcidev, 2);
 	devpriv->BADR3 = pci_resource_start(dev->pcidev, 3);
-	devpriv->BADR4 = pci_resource_start(dev->pcidev, 4);
-	devpriv->BADR5 = pci_resource_start(dev->pcidev, 5);
 
 	ret = comedi_alloc_subdevices(dev, 4);
 	if (ret) {
@@ -344,7 +339,6 @@ static int dyna_pci10xx_attach(struct comedi_device *dev,
 	s->state = 0;
 	s->insn_bits = dyna_pci10xx_do_insn_bits;
 
-	devpriv->valid = 1;
 	mutex_unlock(&start_stop_sem);
 
 	printk(KERN_INFO "comedi: dyna_pci10xx: %s - device setup completed!\n",
-- 
1.7.11