From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<gregkh@linuxfoundation.org>
Subject: [PATCH 1/2] staging: comedi: dt282x: remove the outw wrapper macros
Date: Thu, 12 Jul 2012 17:46:37 -0700 [thread overview]
Message-ID: <201207121746.38097.hartleys@visionengravers.com> (raw)
The macros 'update_dacsr', 'update_adcsr', and 'update_supcsr' all use
the 'devpriv' macro which uses a local variable of a specific name and
yeilds a pointer derived from that name. They are also just wrappers
around simple 'outw' calls. Remove the macros.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/dt282x.c | 55 +++++++++++++++++----------------
1 file changed, 29 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 4af3343..1f0b40e 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -255,11 +255,8 @@ struct dt282x_private {
* Some useless abstractions
*/
#define chan_to_DAC(a) ((a)&1)
-#define update_dacsr(a) outw(devpriv->dacsr|(a), dev->iobase+DT2821_DACSR)
-#define update_adcsr(a) outw(devpriv->adcsr|(a), dev->iobase+DT2821_ADCSR)
#define mux_busy() (inw(dev->iobase+DT2821_ADCSR)&DT2821_MUXBUSY)
#define ad_done() (inw(dev->iobase+DT2821_ADCSR)&DT2821_ADDONE)
-#define update_supcsr(a) outw(devpriv->supcsr|(a), dev->iobase+DT2821_SUPCSR)
/*
* danger! macro abuse... a is the expression to wait on, and b is
@@ -317,7 +314,7 @@ static void dt282x_ao_dma_interrupt(struct comedi_device *dev)
int i;
struct comedi_subdevice *s = dev->subdevices + 1;
- update_supcsr(DT2821_CLRDMADNE);
+ outw(devpriv->supcsr | DT2821_CLRDMADNE, dev->iobase + DT2821_SUPCSR);
if (!s->async->prealloc_buf) {
printk(KERN_ERR "async->data disappeared. dang!\n");
@@ -350,7 +347,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device *dev)
int ret;
struct comedi_subdevice *s = dev->subdevices;
- update_supcsr(DT2821_CLRDMADNE);
+ outw(devpriv->supcsr | DT2821_CLRDMADNE, dev->iobase + DT2821_SUPCSR);
if (!s->async->prealloc_buf) {
printk(KERN_ERR "async->data disappeared. dang!\n");
@@ -387,7 +384,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device *dev)
/* XXX probably wrong */
if (!devpriv->ntrig) {
devpriv->supcsr &= ~(DT2821_DDMA);
- update_supcsr(0);
+ outw(devpriv->supcsr, dev->iobase + DT2821_SUPCSR);
}
#endif
/* restart the channel */
@@ -513,7 +510,8 @@ static irqreturn_t dt282x_interrupt(int irq, void *d)
s->async->events |= COMEDI_CB_EOA;
} else {
if (supcsr & DT2821_SCDN)
- update_supcsr(DT2821_STRIG);
+ outw(devpriv->supcsr | DT2821_STRIG,
+ dev->iobase + DT2821_SUPCSR);
}
handled = 1;
}
@@ -534,7 +532,8 @@ static void dt282x_load_changain(struct comedi_device *dev, int n,
for (i = 0; i < n; i++) {
chan = CR_CHAN(chanlist[i]);
range = CR_RANGE(chanlist[i]);
- update_adcsr((range << 4) | (chan));
+ outw(devpriv->adcsr | (range << 4) | chan,
+ dev->iobase + DT2821_ADCSR);
}
outw(n - 1, dev->iobase + DT2821_CHANCSR);
}
@@ -553,15 +552,16 @@ static int dt282x_ai_insn_read(struct comedi_device *dev,
/* XXX should we really be enabling the ad clock here? */
devpriv->adcsr = DT2821_ADCLK;
- update_adcsr(0);
+ outw(devpriv->adcsr, dev->iobase + DT2821_ADCSR);
dt282x_load_changain(dev, 1, &insn->chanspec);
- update_supcsr(DT2821_PRLD);
+ outw(devpriv->supcsr | DT2821_PRLD, dev->iobase + DT2821_SUPCSR);
wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); return -ETIME;);
for (i = 0; i < insn->n; i++) {
- update_supcsr(DT2821_STRIG);
+ outw(devpriv->supcsr | DT2821_STRIG,
+ dev->iobase + DT2821_SUPCSR);
wait_for(ad_done(), comedi_error(dev, "timeout\n");
return -ETIME;);
@@ -718,7 +718,8 @@ static int dt282x_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* external trigger */
devpriv->supcsr = DT2821_ERRINTEN | DT2821_DS0 | DT2821_DS1;
}
- update_supcsr(DT2821_CLRDMADNE | DT2821_BUFFB | DT2821_ADCINIT);
+ outw(devpriv->supcsr | DT2821_CLRDMADNE | DT2821_BUFFB | DT2821_ADCINIT,
+ dev->iobase + DT2821_SUPCSR);
devpriv->ntrig = cmd->stop_arg * cmd->scan_end_arg;
devpriv->nread = devpriv->ntrig;
@@ -729,7 +730,7 @@ static int dt282x_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (devpriv->ntrig) {
prep_ai_dma(dev, 1, 0);
devpriv->supcsr |= DT2821_DDMA;
- update_supcsr(0);
+ outw(devpriv->supcsr, dev->iobase + DT2821_SUPCSR);
}
devpriv->adcsr = 0;
@@ -737,16 +738,17 @@ static int dt282x_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
dt282x_load_changain(dev, cmd->chanlist_len, cmd->chanlist);
devpriv->adcsr = DT2821_ADCLK | DT2821_IADDONE;
- update_adcsr(0);
+ outw(devpriv->adcsr, dev->iobase + DT2821_ADCSR);
- update_supcsr(DT2821_PRLD);
+ outw(devpriv->supcsr | DT2821_PRLD, dev->iobase + DT2821_SUPCSR);
wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); return -ETIME;);
if (cmd->scan_begin_src == TRIG_FOLLOW) {
- update_supcsr(DT2821_STRIG);
+ outw(devpriv->supcsr | DT2821_STRIG,
+ dev->iobase + DT2821_SUPCSR);
} else {
devpriv->supcsr |= DT2821_XTRIG;
- update_supcsr(0);
+ outw(devpriv->supcsr, dev->iobase + DT2821_SUPCSR);
}
return 0;
@@ -766,10 +768,10 @@ static int dt282x_ai_cancel(struct comedi_device *dev,
dt282x_disable_dma(dev);
devpriv->adcsr = 0;
- update_adcsr(0);
+ outw(devpriv->adcsr, dev->iobase + DT2821_ADCSR);
devpriv->supcsr = 0;
- update_supcsr(DT2821_ADCINIT);
+ outw(devpriv->supcsr | DT2821_ADCINIT, dev->iobase + DT2821_SUPCSR);
return 0;
}
@@ -845,11 +847,11 @@ static int dt282x_ao_insn_write(struct comedi_device *dev,
d ^= (1 << (boardtype.dabits - 1));
}
- update_dacsr(0);
+ outw(devpriv->dacsr, dev->iobase + DT2821_DACSR);
outw(d, dev->iobase + DT2821_DADAT);
- update_supcsr(DT2821_DACON);
+ outw(devpriv->supcsr | DT2821_DACON, dev->iobase + DT2821_SUPCSR);
return 1;
}
@@ -972,7 +974,7 @@ static int dt282x_ao_inttrig(struct comedi_device *dev,
}
prep_ao_dma(dev, 1, size);
- update_supcsr(DT2821_STRIG);
+ outw(devpriv->supcsr | DT2821_STRIG, dev->iobase + DT2821_SUPCSR);
s->async->inttrig = NULL;
return 1;
@@ -993,7 +995,8 @@ static int dt282x_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
dt282x_disable_dma(dev);
devpriv->supcsr = DT2821_ERRINTEN | DT2821_DS1 | DT2821_DDMA;
- update_supcsr(DT2821_CLRDMADNE | DT2821_BUFFB | DT2821_DACINIT);
+ outw(devpriv->supcsr | DT2821_CLRDMADNE | DT2821_BUFFB | DT2821_DACINIT,
+ dev->iobase + DT2821_SUPCSR);
devpriv->ntrig = cmd->stop_arg * cmd->chanlist_len;
devpriv->nread = devpriv->ntrig;
@@ -1005,7 +1008,7 @@ static int dt282x_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
outw(timer, dev->iobase + DT2821_TMRCTR);
devpriv->dacsr = DT2821_SSEL | DT2821_DACLK | DT2821_IDARDY;
- update_dacsr(0);
+ outw(devpriv->dacsr, dev->iobase + DT2821_DACSR);
s->async->inttrig = dt282x_ao_inttrig;
@@ -1018,10 +1021,10 @@ static int dt282x_ao_cancel(struct comedi_device *dev,
dt282x_disable_dma(dev);
devpriv->dacsr = 0;
- update_dacsr(0);
+ outw(devpriv->dacsr, dev->iobase + DT2821_DACSR);
devpriv->supcsr = 0;
- update_supcsr(DT2821_DACINIT);
+ outw(devpriv->supcsr | DT2821_DACINIT, dev->iobase + DT2821_SUPCSR);
return 0;
}
--
1.7.11
reply other threads:[~2012-07-13 0:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207121746.38097.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome