From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<gregkh@linuxfoundation.org>
Subject: [PATCH 32/90] staging: comedi: amplc_pc236: store the pci_dev in the comedi_device
Date: Wed, 18 Jul 2012 18:39:24 -0700 [thread overview]
Message-ID: <201207181839.24686.hartleys@visionengravers.com> (raw)
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/amplc_pc236.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 3eee7f3..aabba98 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -131,8 +131,6 @@ static const struct pc236_board pc236_boards[] = {
feel free to suggest moving the variable to the struct comedi_device struct.
*/
struct pc236_private {
- /* PCI device */
- struct pci_dev *pci_dev;
unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
int enable_irq;
};
@@ -412,6 +410,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d)
static void pc236_report_attach(struct comedi_device *dev, unsigned int irq)
{
const struct pc236_board *thisboard = comedi_board(dev);
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
char tmpbuf[60];
int tmplen;
@@ -421,10 +420,8 @@ static void pc236_report_attach(struct comedi_device *dev, unsigned int irq)
"(base %#lx) ", dev->iobase);
else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) &&
thisboard->bustype == pci_bustype) {
- struct pc236_private *devpriv = dev->private;
- struct pci_dev *pci_dev = devpriv->pci_dev;
tmplen = scnprintf(tmpbuf, sizeof(tmpbuf),
- "(pci %s) ", pci_name(pci_dev));
+ "(pci %s) ", pci_name(pcidev));
} else
tmplen = 0;
if (irq)
@@ -489,7 +486,8 @@ static int pc236_pci_common_attach(struct comedi_device *dev,
unsigned long iobase;
int ret;
- devpriv->pci_dev = pci_dev;
+ comedi_set_hw_dev(dev, &pci_dev->dev);
+
ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
if (ret < 0) {
dev_err(dev->class_dev,
@@ -573,6 +571,7 @@ static int __devinit pc236_attach_pci(struct comedi_device *dev,
static void pc236_detach(struct comedi_device *dev)
{
struct pc236_private *devpriv = dev->private;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
if (devpriv)
pc236_intr_disable(dev);
@@ -580,16 +579,13 @@ static void pc236_detach(struct comedi_device *dev)
free_irq(dev->irq, dev);
if (dev->subdevices)
subdev_8255_cleanup(dev, dev->subdevices + 0);
- if (devpriv) {
- if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) &&
- devpriv->pci_dev) {
- if (dev->iobase)
- comedi_pci_disable(devpriv->pci_dev);
- pci_dev_put(devpriv->pci_dev);
- } else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)) {
- if (dev->iobase)
- release_region(dev->iobase, PC236_IO_SIZE);
- }
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ pci_dev_put(pcidev);
+ } else {
+ if (dev->iobase)
+ release_region(dev->iobase, PC236_IO_SIZE);
}
}
--
1.7.11
next reply other threads:[~2012-07-19 1:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-19 1:39 H Hartley Sweeten [this message]
2012-07-19 10:30 ` Ian Abbott
2012-07-19 10:39 ` Ian Abbott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207181839.24686.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®