Re: [PATCH] Add Etron XHCI quirk to avoid warning spam

[Sarah Sharp <sarah.a.sharp@linux.intel.com>]

Hi Daniel,

I already have a patch in my queue for this.  However, it keys off the
PCI_DEVICE_ID_ASROCK_P67 PCI device ID.  Do you have another Etron
device with a different device ID that needs this quirk?

Sarah Sharp

On Fri, Jul 27, 2012 at 12:03:44PM +0800, Daniel J Blueman wrote:
> When various USB3 devices with Etron XHCI controllers, we see a bunch of
> warnings:
> xhci_hcd 0000:02:00.0: WARN Successful completion on short TX: needs
> XHCI_TRUST_TX_LENGTH quirk?
> 
> Acknowledge the issue by adding the quirk.
> 
> Signed-off-by: Daniel J Blueman <daniel@quora.org>
> ---
>  drivers/usb/host/xhci-pci.c |   11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 18b231b..715ad11 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -95,10 +95,13 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
>  		xhci->limit_active_eps = 64;
>  		xhci->quirks |= XHCI_SW_BW_CHECKING;
>  	}
> -	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
> -			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
> -		xhci->quirks |= XHCI_RESET_ON_RESUME;
> -		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
> +	if (pdev->vendor == PCI_VENDOR_ID_ETRON) {
> +		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
> +
> +		if (pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
> +			xhci->quirks |= XHCI_RESET_ON_RESUME;
> +			xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
> +		}
>  	}
>  	if (pdev->vendor == PCI_VENDOR_ID_VIA)
>  		xhci->quirks |= XHCI_RESET_ON_RESUME;
> -- 
> 1.7.9.5
>