From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
To: Masanari Iida <standby24x7@gmail.com>
Cc: linux-kernel@vger.kernel.org, trivial@kernel.org
Subject: Re: [PATCH] [trivial] dma: Fix typo various drivers in dma
Date: Fri, 3 Aug 2012 13:27:01 -0300 [thread overview]
Message-ID: <20120803162701.GC5736@oc1711230544.ibm.com> (raw)
In-Reply-To: <1344004316-12204-1-git-send-email-standby24x7@gmail.com>
On Fri, Aug 03, 2012 at 11:31:56PM +0900, Masanari Iida wrote:
> Correct spelling typo in drivers/dma.
>
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>
> ---
> drivers/dma/at_hdmac.c | 8 ++++----
> drivers/dma/ep93xx_dma.c | 2 +-
> drivers/dma/fsldma.c | 2 +-
> drivers/dma/imx-dma.c | 2 +-
> drivers/dma/intel_mid_dma_regs.h | 4 ++--
> drivers/dma/pl330.c | 2 +-
> drivers/dma/ppc4xx/adma.c | 2 +-
> drivers/dma/ste_dma40_ll.h | 2 +-
> 8 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 7292aa8..b2d87da 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -169,9 +169,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
> }
>
> /**
> - * atc_desc_chain - build chain adding a descripor
> - * @first: address of first descripor of the chain
> - * @prev: address of previous descripor of the chain
> + * atc_desc_chain - build chain adding a descriptor
> + * @first: address of first descripotr of the chain
> + * @prev: address of previous descripotr of the chain
> * @desc: descriptor to queue
That's still wrong: descripotr.
> *
> * Called from prep_* functions
> @@ -786,7 +786,7 @@ err_out:
> }
>
> /**
> - * atc_dma_cyclic_fill_desc - Fill one period decriptor
> + * atc_dma_cyclic_fill_desc - Fill one period descriptor
> */
> static int
> atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
> diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
> index c64917e..bb02fd9 100644
> --- a/drivers/dma/ep93xx_dma.c
> +++ b/drivers/dma/ep93xx_dma.c
> @@ -1118,7 +1118,7 @@ fail:
> * @chan: channel
> * @dma_addr: DMA mapped address of the buffer
> * @buf_len: length of the buffer (in bytes)
> - * @period_len: lenght of a single period
> + * @period_len: length of a single period
> * @dir: direction of the operation
> * @context: operation context (ignored)
> *
> diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
> index 8f84761..094437b 100644
> --- a/drivers/dma/fsldma.c
> +++ b/drivers/dma/fsldma.c
> @@ -1015,7 +1015,7 @@ static irqreturn_t fsldma_chan_irq(int irq, void *data)
> /*
> * Programming Error
> * The DMA_INTERRUPT async_tx is a NULL transfer, which will
> - * triger a PE interrupt.
> + * trigger a PE interrupt.
> */
> if (stat & FSL_DMA_SR_PE) {
> chan_dbg(chan, "irq: Programming Error INT\n");
> diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
> index fcfeb3c..db8b9aa 100644
> --- a/drivers/dma/imx-dma.c
> +++ b/drivers/dma/imx-dma.c
> @@ -572,7 +572,7 @@ static void imxdma_tasklet(unsigned long data)
> desc->desc.callback(desc->desc.callback_param);
>
> /* If we are dealing with a cyclic descriptor keep it on ld_active
What about a comma after descriptor here?
> - * and dont mark the descripor as complete.
> + * and dont mark the descriptor as complete.
> * Only in non-cyclic cases it would be marked as complete
> */
> if (imxdma_chan_is_doing_cyclic(imxdmac))
> diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
> index 1bfa926..0ef9597 100644
> --- a/drivers/dma/intel_mid_dma_regs.h
> +++ b/drivers/dma/intel_mid_dma_regs.h
> @@ -168,9 +168,9 @@ union intel_mid_dma_cfg_hi {
> * @active_list: current active descriptors
> * @queue: current queued up descriptors
> * @free_list: current free descriptors
> - * @slave: dma slave struture
> + * @slave: dma slave structure
> * @descs_allocated: total number of decsiptors allocated
Note decsiptors here.
> - * @dma: dma device struture pointer
> + * @dma: dma device structure pointer
> * @busy: bool representing if ch is busy (active txn) or not
> * @in_use: bool representing if ch is in use or not
> * @raw_tfr: raw trf interrupt received
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 3ce7d55..71f9e96 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -522,7 +522,7 @@ enum desc_status {
> /* In the DMAC pool */
> FREE,
> /*
> - * Allocted to some channel during prep_xxx
> + * Allocated to some channel during prep_xxx
> * Also may be sitting on the work_list.
> */
> PREP,
> diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
> index ced9882..f72348d 100644
> --- a/drivers/dma/ppc4xx/adma.c
> +++ b/drivers/dma/ppc4xx/adma.c
> @@ -4446,7 +4446,7 @@ static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev)
> ret = -ENOMEM;
> goto err_dma_alloc;
> }
> - dev_dbg(&ofdev->dev, "allocted descriptor pool virt 0x%p phys 0x%llx\n",
> + dev_dbg(&ofdev->dev, "allocated descriptor pool virt 0x%p phys 0x%llx\n",
> adev->dma_desc_pool_virt, (u64)adev->dma_desc_pool);
>
> regs = ioremap(res.start, resource_size(&res));
> diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
> index 51e8e53..6d47373 100644
> --- a/drivers/dma/ste_dma40_ll.h
> +++ b/drivers/dma/ste_dma40_ll.h
> @@ -202,7 +202,7 @@
> /* LLI related structures */
>
> /**
> - * struct d40_phy_lli - The basic configration register for each physical
> + * struct d40_phy_lli - The basic configuration register for each physical
> * channel.
> *
> * @reg_cfg: The configuration register.
> --
> 1.7.12.rc1.16.g05a20c8
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2012-08-03 16:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-03 14:31 Masanari Iida
2012-08-03 16:27 ` Thadeu Lima de Souza Cascardo [this message]
2012-08-04 14:37 ` [PATCH/v2] " Masanari Iida
2012-09-02 7:30 ` [PATCH] " Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120803162701.GC5736@oc1711230544.ibm.com \
--to=cascardo@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=standby24x7@gmail.com \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®