mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To: JBottomley@parallels.com
Cc: pbonzini@redhat.com, bharrosh@panasas.com, mc@linux.vnet.ibm.com,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	zwanp@cn.ibm.com, xiaoguangrong@linux.vnet.ibm.com,
	Wang Sen <senwang@linux.vnet.ibm.com>
Subject: Re: [PATCH v3] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list
Date: Fri, 17 Aug 2012 09:37:19 +0100	[thread overview]
Message-ID: <20120817083719.GA8485@stefanha-thinkpad.localdomain> (raw)
In-Reply-To: <1343629506-29627-1-git-send-email-senwang@linux.vnet.ibm.com>

On Mon, Jul 30, 2012 at 02:25:06PM +0800, Wang Sen wrote:
> When using the commands below to write some data to a virtio-scsi LUN of the
> QEMU guest(32-bit) with 1G physical memory(qemu -m 1024), the qemu will crash.
> 
>         # sudo mkfs.ext4 /dev/sdb  (/dev/sdb is the virtio-scsi LUN.)
>         # sudo mount /dev/sdb /mnt
>         # dd if=/dev/zero of=/mnt/file bs=1M count=1024
> 
> In current implementation, sg_set_buf is called to add buffers to sg list which
> is put into the virtqueue eventually. But if there are some HighMem pages in
> table->sgl you can not get virtual address by sg_virt. So, sg_virt(sg_elem) may
> return NULL value. This will cause QEMU exit when virtqueue_map_sg is called
> in QEMU because an invalid GPA is passed by virtqueue.
> 
> Two solutions are discussed here:
> http://lkml.indiana.edu/hypermail/linux/kernel/1207.3/00675.html
> 
> Finally, value assignment approach was adopted because:
> 
> Value assignment creates a well-formed scatterlist, because the termination 
> marker in source sg_list has been set in blk_rq_map_sg(). The last entry of the
> source sg_list is just copied to the the last entry in destination list.  Note 
> that, for now, virtio_ring does not care about the form of the scatterlist and 
> simply processes the first out_num + in_num consecutive elements of the sg[] 
> array.
> 
> I have tested the patch on my workstation. QEMU would not crash any more.
> 
> Cc: <stable@vger.kernel.org> # 3.4: 4fe74b1: [SCSI] virtio-scsi: SCSI driver
> Signed-off-by: Wang Sen <senwang@linux.vnet.ibm.com>
> ---
>  drivers/scsi/virtio_scsi.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
> index 1b38431..6661610 100644
> --- a/drivers/scsi/virtio_scsi.c
> +++ b/drivers/scsi/virtio_scsi.c
> @@ -198,7 +198,7 @@ static void virtscsi_map_sgl(struct scatterlist *sg, unsigned int *p_idx,
>  	int i;
> 
>  	for_each_sg(table->sgl, sg_elem, table->nents, i)
> -		sg_set_buf(&sg[idx++], sg_virt(sg_elem), sg_elem->length);
> +		sg[idx++] = *sg_elem;
> 
>  	*p_idx = idx;
>  }
> -- 
> 1.7.9.5

Paolo has acked and no further issues have been raised.

James: Can this be merged?

Stefan


      parent reply	other threads:[~2012-08-17  8:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-30  6:25 Wang Sen
2012-07-30  7:45 ` Paolo Bonzini
2012-08-17  8:37 ` Stefan Hajnoczi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120817083719.GA8485@stefanha-thinkpad.localdomain \
    --to=stefanha@linux.vnet.ibm.com \
    --cc=JBottomley@parallels.com \
    --cc=bharrosh@panasas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mc@linux.vnet.ibm.com \
    --cc=pbonzini@redhat.com \
    --cc=senwang@linux.vnet.ibm.com \
    --cc=xiaoguangrong@linux.vnet.ibm.com \
    --cc=zwanp@cn.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®