Re: [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]

On Tue, Aug 21, 2012 at 02:22:22PM +0100, Mark Brown wrote:
> On Tue, Aug 21, 2012 at 03:42:45PM +0300, Felipe Balbi wrote:
> > On Tue, Aug 21, 2012 at 01:41:46PM +0100, Mark Brown wrote:
> > > > +	regmap_read(smsc->regmap, SMSC_DEV_ID, &ret);
> > > > +	dev_dbg(&i2c->dev, "SMSC Device ID: %d\n", ret);
> 
> > > I'd make these log messages dev_info() or something.
> 
> > dev_info() ? It'lll just make boot noisier for no good reason. Which
> > user wants to see this during boot up ? That's a debugging feature for
> > develop IMHO.
> 
> Most of the registers appeared to be chip revision information which is
> most definitely useful to tell people about, though possibly with neater
> formatting ("why is this batch of boards failing...  oh, right").  If
> they're fixed device IDs then the driver should instead be verifying
> that the registers contain the expected values and bombing out if they
> don't.  Either way dev_dbg() isn't too helpful.

I still beg to differ. Even if it fails, dmesg will still contain the
message (provided you have it enabled). I really don't think we want
this to print to console on every boot.

If you're still testing your new batch of boards, you're not just a
simple user and you will have debugging enabled anyway. dev_info() will
be visible to anyone who's got a console running. Not sure how useful
that would be to my neighbor.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]