From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753840Ab2IQAui (ORCPT ); Sun, 16 Sep 2012 20:50:38 -0400 Received: from shadbolt.e.decadent.org.uk ([88.96.1.126]:33383 "EHLO shadbolt.e.decadent.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753044Ab2IQAtj (ORCPT ); Sun, 16 Sep 2012 20:49:39 -0400 Message-Id: <20120917003639.785803707@decadent.org.uk> User-Agent: quilt/0.60-1 Date: Mon, 17 Sep 2012 01:38:03 +0100 From: Ben Hutchings To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Manoj Iyer , Sarah Sharp Subject: [ 098/135] xhci: Recognize USB 3.0 devices as superspeed at powerup In-Reply-To: <20120917003625.784119135@decadent.org.uk> X-SA-Exim-Connect-IP: 2001:470:1f08:1539:21c:bfff:fe03:f805 X-SA-Exim-Mail-From: ben@decadent.org.uk X-SA-Exim-Scanned: No (on shadbolt.decadent.org.uk); SAEximRunCond expanded to false Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.2-stable review patch. If anyone has any objections, please let me know. ------------------ From: Manoj Iyer commit 29d214576f936db627ff62afb9ef438eea18bcd2 upstream. On Intel Panther Point chipset USB 3.0 devices show up as high-speed devices on powerup, but after an s3 cycle they are correctly recognized as SuperSpeed. At powerup switch the port to xHCI so that USB 3.0 devices are correctly recognized. BugLink: http://bugs.launchpad.net/bugs/1000424 This patch should be backported to kernels as old as 3.0, that contain commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Manoj Iyer Signed-off-by: Sarah Sharp Signed-off-by: Ben Hutchings --- drivers/usb/host/pci-quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index c5e9e4a..486e812 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -870,9 +870,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any