From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Peter Huewe <peter.huewe@infineon.com>,
Kent Yoder <key@linux.vnet.ibm.com>
Subject: [ 49/62] tpm: Propagate error from tpm_transmit to fix a timeout hang
Date: Thu, 18 Oct 2012 19:45:17 -0700 [thread overview]
Message-ID: <20121019024303.889203015@linuxfoundation.org> (raw)
In-Reply-To: <20121019024255.944999470@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Huewe <peter.huewe@infineon.com>
commit abce9ac292e13da367bbd22c1f7669f988d931ac upstream.
tpm_write calls tpm_transmit without checking the return value and
assigns the return value unconditionally to chip->pending_data, even if
it's an error value.
This causes three bugs.
So if we write to /dev/tpm0 with a tpm_param_size bigger than
TPM_BUFSIZE=0x1000 (e.g. 0x100a)
and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a)
tpm_transmit returns -E2BIG which is assigned to chip->pending_data as
-7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully
been written to the TPM, altough this is not true (bug #1).
As we did write more than than TPM_BUFSIZE bytes but tpm_write reports
that only TPM_BUFSIZE bytes have been written the vfs tries to write
the remaining bytes (in this case 10 bytes) to the tpm device driver via
tpm_write which then blocks at
/* cannot perform a write until the read has cleared
either via tpm_read or a user_read_timer timeout */
while (atomic_read(&chip->data_pending) != 0)
msleep(TPM_TIMEOUT);
for 60 seconds, since data_pending is -7 and nobody is able to
read it (since tpm_read luckily checks if data_pending is greater than
0) (#bug 2).
After that the remaining bytes are written to the TPM which are
interpreted by the tpm as a normal command. (bug #3)
So if the last bytes of the command stream happen to be a e.g.
tpm_force_clear this gets accidentally sent to the TPM.
This patch fixes all three bugs, by propagating the error code of
tpm_write and returning -E2BIG if the input buffer is too big,
since the response from the tpm for a truncated value is bogus anyway.
Moreover it returns -EBUSY to userspace if there is a response ready to be
read.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/tpm/tpm.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1186,17 +1186,20 @@ ssize_t tpm_write(struct file *file, con
size_t size, loff_t *off)
{
struct tpm_chip *chip = file->private_data;
- size_t in_size = size, out_size;
+ size_t in_size = size;
+ ssize_t out_size;
/* cannot perform a write until the read has cleared
- either via tpm_read or a user_read_timer timeout */
- while (atomic_read(&chip->data_pending) != 0)
- msleep(TPM_TIMEOUT);
-
- mutex_lock(&chip->buffer_mutex);
+ either via tpm_read or a user_read_timer timeout.
+ This also prevents splitted buffered writes from blocking here.
+ */
+ if (atomic_read(&chip->data_pending) != 0)
+ return -EBUSY;
if (in_size > TPM_BUFSIZE)
- in_size = TPM_BUFSIZE;
+ return -E2BIG;
+
+ mutex_lock(&chip->buffer_mutex);
if (copy_from_user
(chip->data_buffer, (void __user *) buf, in_size)) {
@@ -1206,6 +1209,10 @@ ssize_t tpm_write(struct file *file, con
/* atomic tpm command send and result receive */
out_size = tpm_transmit(chip, chip->data_buffer, TPM_BUFSIZE);
+ if (out_size < 0) {
+ mutex_unlock(&chip->buffer_mutex);
+ return out_size;
+ }
atomic_set(&chip->data_pending, out_size);
mutex_unlock(&chip->buffer_mutex);
next prev parent reply other threads:[~2012-10-19 3:12 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 2:44 [ 00/62] 3.4.15-stable review Greg Kroah-Hartman
2012-10-19 2:44 ` [ 01/62] ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels Greg Kroah-Hartman
2012-10-19 2:44 ` [ 02/62] nfsd4: fix nfs4 stateid leak Greg Kroah-Hartman
2012-10-19 2:44 ` [ 03/62] NFSD: pass null terminated buf to kstrtouint() Greg Kroah-Hartman
2012-10-19 2:44 ` [ 04/62] lockd: use rpc clients cl_nodename for id encoding Greg Kroah-Hartman
2012-10-19 2:44 ` [ 05/62] ACPI: EC: Make the GPE storm threshold a module parameter Greg Kroah-Hartman
2012-10-19 2:44 ` [ 06/62] ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop Greg Kroah-Hartman
2012-10-19 2:44 ` [ 07/62] ALSA: hda - do not detect jack on internal speakers for Realtek Greg Kroah-Hartman
2012-10-19 2:44 ` [ 08/62] ALSA: hda - Fix memory leaks at error path in patch_cirrus.c Greg Kroah-Hartman
2012-10-19 2:44 ` [ 09/62] mips,kgdb: fix recursive page fault with CONFIG_KPROBES Greg Kroah-Hartman
2012-10-19 2:44 ` [ 10/62] tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking Greg Kroah-Hartman
2012-10-19 2:44 ` [ 11/62] SCSI: hpsa: dial down lockup detection during firmware flash Greg Kroah-Hartman
2012-10-19 2:44 ` [ 12/62] iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU Greg Kroah-Hartman
2012-10-19 2:44 ` [ 13/62] iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp Greg Kroah-Hartman
2012-10-19 2:44 ` [ 14/62] iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode Greg Kroah-Hartman
2012-10-19 2:44 ` [ 15/62] iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values Greg Kroah-Hartman
2012-10-19 2:44 ` [ 16/62] SCSI: storvsc: Account for in-transit packets in the RESET path Greg Kroah-Hartman
2012-10-19 2:44 ` [ 17/62] SCSI: scsi_debug: Fix off-by-one bug when unmapping region Greg Kroah-Hartman
2012-10-19 2:44 ` [ 18/62] ARM: 7541/1: Add ARM ERRATA 775420 workaround Greg Kroah-Hartman
2012-10-19 2:44 ` [ 19/62] firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel) Greg Kroah-Hartman
2012-10-19 2:44 ` [ 20/62] SUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT Greg Kroah-Hartman
2012-10-19 2:44 ` [ 21/62] target: fix return code in target_core_init_configfs error path Greg Kroah-Hartman
2012-10-19 2:44 ` [ 22/62] xen/bootup: allow {read|write}_cr8 pvops call Greg Kroah-Hartman
2012-10-19 2:44 ` [ 23/62] xen/bootup: allow read_tscp call for Xen PV guests Greg Kroah-Hartman
2012-10-19 2:44 ` [ 24/62] block: fix request_queue->flags initialization Greg Kroah-Hartman
2012-10-19 2:44 ` [ 25/62] autofs4 - fix reset pending flag on mount fail Greg Kroah-Hartman
2012-10-19 2:44 ` [ 26/62] module: taint kernel when lve module is loaded Greg Kroah-Hartman
2012-10-19 2:44 ` [ 27/62] video/udlfb: fix line counting in fb_write Greg Kroah-Hartman
2012-10-19 2:44 ` [ 28/62] viafb: dont touch clock state on OLPC XO-1.5 Greg Kroah-Hartman
2012-10-19 2:44 ` [ 29/62] timers: Fix endless looping between cascade() and internal_add_timer() Greg Kroah-Hartman
2012-10-19 2:44 ` [ 30/62] ath9k: use ieee80211_free_txskb Greg Kroah-Hartman
2012-10-19 2:44 ` [ 31/62] md/raid10: use correct limit variable Greg Kroah-Hartman
2012-10-19 2:45 ` [ 32/62] kdb,vt_console: Fix missed data due to pager overruns Greg Kroah-Hartman
2012-10-19 21:39 ` Ben Hutchings
2012-10-19 2:45 ` [ 33/62] pktgen: fix crash when generating IPv6 packets Greg Kroah-Hartman
2012-10-19 2:45 ` [ 34/62] ipvs: fix oops in ip_vs_dst_event on rmmod Greg Kroah-Hartman
2012-10-19 2:45 ` [ 35/62] netfilter: nf_conntrack: fix racy timer handling with reliable events Greg Kroah-Hartman
2012-10-19 2:45 ` [ 36/62] netfilter: ipset: fix timeout value overflow bug Greg Kroah-Hartman
2012-10-19 2:45 ` [ 37/62] netfilter: ipset: timeout fixing bug broke SET target special timeout value Greg Kroah-Hartman
2012-10-19 2:45 ` [ 38/62] ipvs: fix oops on NAT reply in br_nf context Greg Kroah-Hartman
2012-10-19 2:45 ` [ 39/62] netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation Greg Kroah-Hartman
2012-10-19 2:45 ` [ 40/62] netfilter: nf_nat_sip: fix via header translation with multiple parameters Greg Kroah-Hartman
2012-10-19 2:45 ` [ 41/62] netfilter: nf_ct_expect: fix possible access to uninitialized timer Greg Kroah-Hartman
2012-10-19 2:45 ` [ 42/62] netfilter: limit, hashlimit: avoid duplicated inline Greg Kroah-Hartman
2012-10-19 2:45 ` [ 43/62] netfilter: xt_limit: have r->cost != 0 case work Greg Kroah-Hartman
2012-10-19 2:45 ` [ 44/62] Add CDC-ACM support for the CX93010-2x UCMxx USB Modem Greg Kroah-Hartman
2012-10-19 2:45 ` [ 45/62] drm/radeon: Dont destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy() Greg Kroah-Hartman
2012-10-19 2:45 ` [ 46/62] drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag Greg Kroah-Hartman
2012-10-19 2:45 ` [ 47/62] jbd: Fix assertion failure in commit code due to lacking transaction credits Greg Kroah-Hartman
2012-10-19 2:45 ` [ 48/62] e1000e: Change wthresh to 1 to avoid possible Tx stalls Greg Kroah-Hartman
2012-10-19 2:45 ` Greg Kroah-Hartman [this message]
2012-10-19 2:45 ` [ 50/62] eCryptfs: Unlink lower inode when ecryptfs_create() fails Greg Kroah-Hartman
2012-10-19 2:45 ` [ 51/62] eCryptfs: Initialize empty lower files when opening them Greg Kroah-Hartman
2012-10-19 2:45 ` [ 52/62] eCryptfs: Revert to a writethrough cache model Greg Kroah-Hartman
2012-10-19 2:45 ` [ 53/62] eCryptfs: Write out all dirty pages just before releasing the lower file Greg Kroah-Hartman
2012-10-19 2:45 ` [ 54/62] eCryptfs: Call lower ->flush() from ecryptfs_flush() Greg Kroah-Hartman
2012-10-19 2:45 ` [ 55/62] usb: gadget: at91_udc: fix dt support Greg Kroah-Hartman
2012-10-19 2:45 ` [ 56/62] ALSA: hda - Always check array bounds in alc_get_line_out_pfx Greg Kroah-Hartman
2012-10-19 2:45 ` [ 57/62] ASoC: fsi: dont reschedule DMA from an atomic context Greg Kroah-Hartman
2012-10-19 2:45 ` [ 58/62] ASoC: wm2200: Use rev A register patches on rev B Greg Kroah-Hartman
2012-10-19 2:45 ` [ 59/62] ASoC: wm2200: Fix non-inverted OUT2 mute control Greg Kroah-Hartman
2012-10-19 2:45 ` [ 60/62] ASoC: omap-abe-twl6040: Fix typo of Vibrator Greg Kroah-Hartman
2012-10-19 2:45 ` [ 61/62] ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new() Greg Kroah-Hartman
2012-10-19 2:45 ` [ 62/62] ALSA: emu10k1: add chip details for E-mu 1010 PCIe card Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121019024303.889203015@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=key@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.huewe@infineon.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome