From: Josh Cartwright <josh.cartwright@ni.com>
To: Nick Bowler <nbowler@elliptictech.com>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, arm@kernel.org,
Arnd Bergmann <arnd@arndb.de>, John Linn <john.linn@xilinx.com>,
Michal Simek <michal.simek@xilinx.com>
Subject: Re: [PATCH v3] ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
Date: Mon, 5 Nov 2012 15:54:10 -0600 [thread overview]
Message-ID: <20121105215410.GC1254@beefymiracle.amer.corp.natinst.com> (raw)
In-Reply-To: <1352151949-18319-1-git-send-email-nbowler@elliptictech.com>
[-- Attachment #1: Type: text/plain, Size: 770 bytes --]
On Mon, Nov 05, 2012 at 04:45:49PM -0500, Nick Bowler wrote:
> The main UART on the Xilinx ZC702 board is UART1, located at address
> e0001000. Add a Kconfig option to select this device as the low-level
> debugging port. This allows the really early boot printouts to reach
> the USB serial adaptor on this board.
>
> For consistency's sake, add a choice entry for UART0 even though it is
> the the default if UART1 is not selected.
>
> Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
> Tested-by: Josh Cartwright <josh.cartwright@ni.com>
> ---
> Sorry all for the phenominal delay in sending this out. Josh, I kept
> your Tested-By since this version is Obviously Equivalent??? to v2...
I re-tested again just in case and everything is good.
Thanks,
Josh
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2012-11-05 21:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-05 21:45 Nick Bowler
2012-11-05 21:54 ` Josh Cartwright [this message]
2012-11-07 12:49 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121105215410.GC1254@beefymiracle.amer.corp.natinst.com \
--to=josh.cartwright@ni.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=john.linn@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=nbowler@elliptictech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®