From: Rik van Riel <riel@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: aquini@redhat.com, walken@google.com, eric.dumazet@gmail.com,
lwoodman@redhat.com, jeremy@goop.org,
Jan Beulich <JBeulich@novell.com>,
Thomas Gleixner <tglx@linutronix.de>,
knoel@redhat.com
Subject: [RFC PATCH 3/5] x86,smp: auto tune spinlock backoff delay factor
Date: Thu, 3 Jan 2013 00:23:41 -0500 [thread overview]
Message-ID: <20130103002341.3cc4b7b4@annuminas.surriel.com> (raw)
In-Reply-To: <20130103001536.7fd1e952@annuminas.surriel.com>
Many spinlocks are embedded in data structures; having many CPUs
pounce on the cache line the lock is in will slow down the lock
holder, and can cause system performance to fall off a cliff.
The paper "Non-scalable locks are dangerous" is a good reference:
http://pdos.csail.mit.edu/papers/linux:lock.pdf
In the Linux kernel, spinlocks are optimized for the case of
there not being contention. After all, if there is contention,
the data structure can be improved to reduce or eliminate
lock contention.
Likewise, the spinlock API should remain simple, and the
common case of the lock not being contended should remain
as fast as ever.
However, since spinlock contention should be fairly uncommon,
we can add functionality into the spinlock slow path that keeps
system performance from falling off a cliff when there is lock
contention.
Proportional delay in ticket locks is delaying the time between
checking the ticket based on a delay factor, and the number of
CPUs ahead of us in the queue for this lock. Checking the lock
less often allows the lock holder to continue running, resulting
in better throughput and preventing performance from dropping
off a cliff.
Proportional spinlock delay with a high delay factor works well
when there is lots contention on a lock. Likewise, a smaller
delay factor works well when a lock is lightly contended.
Making the code auto-tune the delay factor results in a system
that performs well with both light and heavy lock contention.
Signed-off-by: Rik van Riel <riel@redhat.com>
---
arch/x86/kernel/smp.c | 41 ++++++++++++++++++++++++++++++++++++++---
1 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index aa743e9..f1ec7f7 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -113,12 +113,31 @@ static atomic_t stopping_cpu = ATOMIC_INIT(-1);
static bool smp_no_nmi_ipi = false;
/*
- * Wait on a congested ticket spinlock.
+ * Wait on a congested ticket spinlock. Many spinlocks are embedded in
+ * data structures; having many CPUs pounce on the cache line with the
+ * spinlock simultaneously can slow down the lock holder, and the system
+ * as a whole.
+ *
+ * To prevent total performance collapse in case of bad spinlock contention,
+ * perform proportional backoff. The per-cpu value of delay is automatically
+ * tuned to limit the number of times spinning CPUs poll the lock before
+ * obtaining it. This limits the amount of cross-CPU traffic required to obtain
+ * a spinlock, and keeps system performance from dropping off a cliff.
+ *
+ * There is a tradeoff. If we poll too often, the whole system is slowed
+ * down. If we sleep too long, the lock will go unused for a period of
+ * time. The solution is to go for a fast spin if we are at the head of
+ * the queue, to slowly increase the delay if we sleep for too short a
+ * time, and to decrease the delay if we slept for too long.
*/
+#define MIN_SPINLOCK_DELAY 1
+#define MAX_SPINLOCK_DELAY 16000
+DEFINE_PER_CPU(int, spinlock_delay) = { MIN_SPINLOCK_DELAY };
void ticket_spin_lock_wait(arch_spinlock_t *lock, struct __raw_tickets inc)
{
__ticket_t head = inc.head, ticket = inc.tail;
__ticket_t waiters_ahead;
+ int delay = __this_cpu_read(spinlock_delay);
unsigned loops;
for (;;) {
@@ -133,14 +152,30 @@ void ticket_spin_lock_wait(arch_spinlock_t *lock, struct __raw_tickets inc)
} while (ACCESS_ONCE(lock->tickets.head) != ticket);
break;
}
- loops = 50 * waiters_ahead;
+
+ /*
+ * The lock is still busy; slowly increase the delay. If we
+ * end up sleeping too long, the code below will reduce the
+ * delay. Ideally we acquire the lock in the tight loop above.
+ */
+ if (!(head % 7) && delay < MAX_SPINLOCK_DELAY)
+ delay++;
+
+ loops = delay * waiters_ahead;
while (loops--)
cpu_relax();
head = ACCESS_ONCE(lock->tickets.head);
- if (head == ticket)
+ if (head == ticket) {
+ /*
+ * We overslept and have no idea how long the lock
+ * went idle. Reduce the delay as a precaution.
+ */
+ delay -= delay/32 + 1;
break;
+ }
}
+ __this_cpu_write(spinlock_delay, delay);
}
/*
next prev parent reply other threads:[~2013-01-03 5:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-03 5:15 [RFC PATCH 0/5] x86,smp: make ticket spinlock proportional backoff w/ auto tuning Rik van Riel
2013-01-03 5:18 ` [RFC PATCH 1/5] x86,smp: move waiting on contended ticket lock out of line Rik van Riel
2013-01-03 10:47 ` Michel Lespinasse
2013-01-03 5:22 ` [RFC PATCH 2/5] x86,smp: proportional backoff for ticket spinlocks Rik van Riel
2013-01-03 11:35 ` Raghavendra KT
2013-01-03 11:42 ` Michel Lespinasse
2013-01-03 18:19 ` Raghavendra K T
2013-01-03 5:23 ` Rik van Riel [this message]
2013-01-03 12:31 ` [RFC PATCH 3/5] x86,smp: auto tune spinlock backoff delay factor Michel Lespinasse
2013-01-03 17:17 ` Rik van Riel
2013-01-05 0:45 ` Rik van Riel
2013-01-03 5:24 ` [RFC PATCH 4/5] x86,smp: keep spinlock delay values per hashed spinlock address Rik van Riel
2013-01-03 12:48 ` Michel Lespinasse
2013-01-03 13:05 ` Eric Dumazet
2013-01-03 5:25 ` [RFC PATCH 5/5] x86,smp: add debugging code to track spinlock delay value Rik van Riel
2013-01-03 10:46 ` [RFC PATCH 0/5] x86,smp: make ticket spinlock proportional backoff w/ auto tuning Michel Lespinasse
2013-01-03 11:29 ` Raghavendra KT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130103002341.3cc4b7b4@annuminas.surriel.com \
--to=riel@redhat.com \
--cc=JBeulich@novell.com \
--cc=aquini@redhat.com \
--cc=eric.dumazet@gmail.com \
--cc=jeremy@goop.org \
--cc=knoel@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lwoodman@redhat.com \
--cc=tglx@linutronix.de \
--cc=walken@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®