From: Hiroshi Doyu <hdoyu@nvidia.com>
To: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: "mturquette@linaro.org" <mturquette@linaro.org>,
"sboyd@codeaurora.org" <sboyd@codeaurora.org>,
"swarren@wwwdotorg.org" <swarren@wwwdotorg.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-tegra@vger.kernel.org" <linux-tegra@vger.kernel.org>
Subject: Re: [PATCH V2] clk: Add composite clock type
Date: Tue, 5 Feb 2013 11:22:52 +0100 [thread overview]
Message-ID: <20130205.122252.570646990867457667.hdoyu@nvidia.com> (raw)
In-Reply-To: <5110C3E5.2010503@nvidia.com>
Prashant Gaikwad <pgaikwad@nvidia.com> wrote @ Tue, 5 Feb 2013 09:33:41 +0100:
> > The members of "clk_composite_ops" seems to be always assigned
> > statically. Istead of dynamically allocating/assigning, can't we just
> > have "clk_composite_ops" statically as below?
> >
> > static struct clk_ops clk_composite_ops = {
> > .get_parent = clk_composite_get_parent;
> > .set_parent = clk_composite_set_parent;
> > .recalc_rate = clk_composite_recalc_rate;
> > .round_rate = clk_composite_round_rate;
> > .set_rate = clk_composite_set_rate;
> > .is_enabled = clk_composite_is_enabled;
> > .enable = clk_composite_enable;
> > .disable = clk_composite_disable;
> > };
> >
> > struct clk *clk_register_composite(struct device *dev, const char *name,
> > const char **parent_names, int num_parents,
> > struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
> > struct clk_hw *div_hw, const struct clk_ops *div_ops,
> > struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
> > unsigned long flags)
> > {
> > .....
> >
> > init.ops = &clk_composite_ops;
>
> No, clk_ops depends on the clocks you are using. There could be a clock
> with mux and gate while another one with mux and div.
You are right. What about the following? We don't have to have similar
copy of clk_composite_ops for each instances.
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index f30fb4b..8f88805 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -27,6 +27,9 @@ static u8 clk_composite_get_parent(struct clk_hw *hw)
const struct clk_ops *mux_ops = composite->mux_ops;
struct clk_hw *mux_hw = composite->mux_hw;
+ if (!mux_hw->clk)
+ return -EINVAL;
+
mux_hw->clk = hw->clk;
return mux_ops->get_parent(mux_hw);
@@ -38,6 +41,9 @@ static int clk_composite_set_parent(struct clk_hw *hw, u8 index)
const struct clk_ops *mux_ops = composite->mux_ops;
struct clk_hw *mux_hw = composite->mux_hw;
+ if (!mux_hw->clk)
+ return -EINVAL;
+
mux_hw->clk = hw->clk;
return mux_ops->set_parent(mux_hw, index);
@@ -50,6 +56,9 @@ static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
const struct clk_ops *div_ops = composite->div_ops;
struct clk_hw *div_hw = composite->div_hw;
+ if (!div_hw->clk)
+ return -EINVAL;
+
div_hw->clk = hw->clk;
return div_ops->recalc_rate(div_hw, parent_rate);
@@ -62,6 +71,9 @@ static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
const struct clk_ops *div_ops = composite->div_ops;
struct clk_hw *div_hw = composite->div_hw;
+ if (!div_hw->clk)
+ return -EINVAL;
+
div_hw->clk = hw->clk;
return div_ops->round_rate(div_hw, rate, prate);
@@ -74,6 +86,9 @@ static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate,
const struct clk_ops *div_ops = composite->div_ops;
struct clk_hw *div_hw = composite->div_hw;
+ if (!div_hw->clk)
+ return -EINVAL;
+
div_hw->clk = hw->clk;
return div_ops->set_rate(div_hw, rate, parent_rate);
@@ -85,6 +100,9 @@ static int clk_composite_is_enabled(struct clk_hw *hw)
const struct clk_ops *gate_ops = composite->gate_ops;
struct clk_hw *gate_hw = composite->gate_hw;
+ if (!gate_hw->clk)
+ return -EINVAL;
+
gate_hw->clk = hw->clk;
return gate_ops->is_enabled(gate_hw);
@@ -96,6 +114,9 @@ static int clk_composite_enable(struct clk_hw *hw)
const struct clk_ops *gate_ops = composite->gate_ops;
struct clk_hw *gate_hw = composite->gate_hw;
+ if (!gate_hw->clk)
+ return -EINVAL;
+
gate_hw->clk = hw->clk;
return gate_ops->enable(gate_hw);
@@ -107,11 +128,25 @@ static void clk_composite_disable(struct clk_hw *hw)
const struct clk_ops *gate_ops = composite->gate_ops;
struct clk_hw *gate_hw = composite->gate_hw;
+ if (!gate_hw->clk)
+ return -EINVAL;
+
gate_hw->clk = hw->clk;
gate_ops->disable(gate_hw);
}
+static struct clk_ops clk_composite_ops = {
+ .get_parent = clk_composite_get_parent,
+ .set_parent = clk_composite_set_parent,
+ .recalc_rate = clk_composite_recalc_rate,
+ .round_rate = clk_composite_round_rate,
+ .set_rate = clk_composite_set_rate,
+ .is_enabled = clk_composite_is_enabled,
+ .enable = clk_composite_enable,
+ .disable = clk_composite_disable,
+};
+
struct clk *clk_register_composite(struct device *dev, const char *name,
const char **parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
@@ -135,14 +170,6 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
init.parent_names = parent_names;
init.num_parents = num_parents;
- /* allocate the clock ops */
- clk_composite_ops = kzalloc(sizeof(*clk_composite_ops), GFP_KERNEL);
- if (!clk_composite_ops) {
- pr_err("%s: could not allocate clk ops\n", __func__);
- kfree(composite);
- return ERR_PTR(-ENOMEM);
- }
-
if (mux_hw && mux_ops) {
if (!mux_ops->get_parent || !mux_ops->set_parent) {
clk = ERR_PTR(-EINVAL);
@@ -151,8 +178,6 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
composite->mux_hw = mux_hw;
composite->mux_ops = mux_ops;
- clk_composite_ops->get_parent = clk_composite_get_parent;
- clk_composite_ops->set_parent = clk_composite_set_parent;
}
if (div_hw && div_ops) {
@@ -164,9 +189,6 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
composite->div_hw = div_hw;
composite->div_ops = div_ops;
- clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
- clk_composite_ops->round_rate = clk_composite_round_rate;
- clk_composite_ops->set_rate = clk_composite_set_rate;
}
if (gate_hw && gate_ops) {
@@ -178,12 +200,9 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
composite->gate_hw = gate_hw;
composite->gate_ops = gate_ops;
- clk_composite_ops->is_enabled = clk_composite_is_enabled;
- clk_composite_ops->enable = clk_composite_enable;
- clk_composite_ops->disable = clk_composite_disable;
}
- init.ops = clk_composite_ops;
+ init.ops = &clk_composite_ops;
composite->hw.init = &init;
clk = clk_register(dev, &composite->hw);
@@ -202,7 +221,6 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
return clk;
err:
- kfree(clk_composite_ops);
kfree(composite);
return clk;
}
next prev parent reply other threads:[~2013-02-05 10:23 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 8:11 Prashant Gaikwad
2013-02-04 9:37 ` Hiroshi Doyu
2013-02-05 8:33 ` Prashant Gaikwad
2013-02-05 10:22 ` Hiroshi Doyu [this message]
2013-02-05 10:38 ` Tomasz Figa
2013-02-05 11:15 ` Russell King - ARM Linux
2013-02-06 2:55 ` Prashant Gaikwad
2013-02-06 6:10 ` Hiroshi Doyu
2013-02-06 9:52 ` Prashant Gaikwad
2013-02-06 10:00 ` Hiroshi Doyu
2013-02-06 10:02 ` Tomasz Figa
2013-02-05 10:15 ` Tomasz Figa
2013-02-06 3:04 ` Prashant Gaikwad
2013-02-06 10:06 ` Tomasz Figa
2013-02-28 7:58 ` Prashant Gaikwad
2013-02-28 18:20 ` Stephen Warren
2013-03-13 16:30 ` Tomasz Figa
2013-03-19 12:04 ` Prashant Gaikwad
2013-02-05 10:50 ` Hiroshi Doyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130205.122252.570646990867457667.hdoyu@nvidia.com \
--to=hdoyu@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=pgaikwad@nvidia.com \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®