mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>,
	Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
	Timo Kokkonen <timo.t.kokkonen@iki.fi>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Media: remove incorrect __exit markups
Date: Sun, 24 Feb 2013 19:22:16 -0800	[thread overview]
Message-ID: <20130225032215.GA9352@core.coreip.homeip.net> (raw)

Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/media/i2c/adp1653.c                      | 4 ++--
 drivers/media/i2c/smiapp/smiapp-core.c           | 4 ++--
 drivers/media/platform/soc_camera/omap1_camera.c | 4 ++--
 drivers/media/radio/radio-si4713.c               | 4 ++--
 drivers/media/rc/ir-rx51.c                       | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c
index df16380..ef75abe 100644
--- a/drivers/media/i2c/adp1653.c
+++ b/drivers/media/i2c/adp1653.c
@@ -447,7 +447,7 @@ free_and_quit:
 	return ret;
 }
 
-static int __exit adp1653_remove(struct i2c_client *client)
+static int adp1653_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
 	struct adp1653_flash *flash = to_adp1653_flash(subdev);
@@ -476,7 +476,7 @@ static struct i2c_driver adp1653_i2c_driver = {
 		.pm	= &adp1653_pm_ops,
 	},
 	.probe		= adp1653_probe,
-	.remove		= __exit_p(adp1653_remove),
+	.remove		= adp1653_remove,
 	.id_table	= adp1653_id_table,
 };
 
diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
index 83c7ed7..cae4f46 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -2833,7 +2833,7 @@ static int smiapp_probe(struct i2c_client *client,
 				 sensor->src->pads, 0);
 }
 
-static int __exit smiapp_remove(struct i2c_client *client)
+static int smiapp_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
 	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
@@ -2881,7 +2881,7 @@ static struct i2c_driver smiapp_i2c_driver = {
 		.pm = &smiapp_pm_ops,
 	},
 	.probe	= smiapp_probe,
-	.remove	= __exit_p(smiapp_remove),
+	.remove	= smiapp_remove,
 	.id_table = smiapp_id_table,
 };
 
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index 39a77f0..5f548ac 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -1677,7 +1677,7 @@ exit:
 	return err;
 }
 
-static int __exit omap1_cam_remove(struct platform_device *pdev)
+static int omap1_cam_remove(struct platform_device *pdev)
 {
 	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
 	struct omap1_cam_dev *pcdev = container_of(soc_host,
@@ -1709,7 +1709,7 @@ static struct platform_driver omap1_cam_driver = {
 		.name	= DRIVER_NAME,
 	},
 	.probe		= omap1_cam_probe,
-	.remove		= __exit_p(omap1_cam_remove),
+	.remove		= omap1_cam_remove,
 };
 
 module_platform_driver(omap1_cam_driver);
diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
index 1507c9d..8ae8442d 100644
--- a/drivers/media/radio/radio-si4713.c
+++ b/drivers/media/radio/radio-si4713.c
@@ -328,7 +328,7 @@ exit:
 }
 
 /* radio_si4713_pdriver_remove - remove the device */
-static int __exit radio_si4713_pdriver_remove(struct platform_device *pdev)
+static int radio_si4713_pdriver_remove(struct platform_device *pdev)
 {
 	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
 	struct radio_si4713_device *rsdev = container_of(v4l2_dev,
@@ -350,7 +350,7 @@ static struct platform_driver radio_si4713_pdriver = {
 		.name	= "radio-si4713",
 	},
 	.probe		= radio_si4713_pdriver_probe,
-	.remove         = __exit_p(radio_si4713_pdriver_remove),
+	.remove         = radio_si4713_pdriver_remove,
 };
 
 module_platform_driver(radio_si4713_pdriver);
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 8ead492..31b955b 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -464,14 +464,14 @@ static int lirc_rx51_probe(struct platform_device *dev)
 	return 0;
 }
 
-static int __exit lirc_rx51_remove(struct platform_device *dev)
+static int lirc_rx51_remove(struct platform_device *dev)
 {
 	return lirc_unregister_driver(lirc_rx51_driver.minor);
 }
 
 struct platform_driver lirc_rx51_platform_driver = {
 	.probe		= lirc_rx51_probe,
-	.remove		= __exit_p(lirc_rx51_remove),
+	.remove		= lirc_rx51_remove,
 	.suspend	= lirc_rx51_suspend,
 	.resume		= lirc_rx51_resume,
 	.driver		= {
-- 
1.7.11.7


-- 
Dmitry

             reply	other threads:[~2013-02-25  3:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-25  3:22 Dmitry Torokhov [this message]
2013-02-25  7:49 ` Guennadi Liakhovetski
2013-02-25 17:35   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130225032215.GA9352@core.coreip.homeip.net \
    --to=dmitry.torokhov@gmail.com \
    --cc=g.liakhovetski@gmx.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@redhat.com \
    --cc=sakari.ailus@iki.fi \
    --cc=timo.t.kokkonen@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®