mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ben Hutchings <ben@decadent.org.uk>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: akpm@linux-foundation.org,
	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Al Viro <viro@ZenIV.linux.org.uk>
Subject: [ 69/82] Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys
Date: Mon, 18 Mar 2013 04:22:53 +0000	[thread overview]
Message-ID: <20130318042150.936654279@decadent.org.uk> (raw)
In-Reply-To: <20130318042144.234468645@decadent.org.uk>

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

commit 8aec0f5d4137532de14e6554fd5dd201ff3a3c49 upstream.

Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to
compat_process_vm_rw() shows that the compatibility code requires an
explicit "access_ok()" check before calling
compat_rw_copy_check_uvector(). The same difference seems to appear when
we compare fs/read_write.c:do_readv_writev() to
fs/compat.c:compat_do_readv_writev().

This subtle difference between the compat and non-compat requirements
should probably be debated, as it seems to be error-prone. In fact,
there are two others sites that use this function in the Linux kernel,
and they both seem to get it wrong:

Now shifting our attention to fs/aio.c, we see that aio_setup_iocb()
also ends up calling compat_rw_copy_check_uvector() through
aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to
be missing. Same situation for
security/keys/compat.c:compat_keyctl_instantiate_key_iov().

I propose that we add the access_ok() check directly into
compat_rw_copy_check_uvector(), so callers don't have to worry about it,
and it therefore makes the compat call code similar to its non-compat
counterpart. Place the access_ok() check in the same location where
copy_from_user() can trigger a -EFAULT error in the non-compat code, so
the ABI behaviors are alike on both compat and non-compat.

While we are here, fix compat_do_readv_writev() so it checks for
compat_rw_copy_check_uvector() negative return values.

And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error
handling.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/compat.c            |   15 +++++++--------
 mm/process_vm_access.c |    8 --------
 security/keys/compat.c |    4 ++--
 3 files changed, 9 insertions(+), 18 deletions(-)

--- a/fs/compat.c
+++ b/fs/compat.c
@@ -572,6 +572,10 @@ ssize_t compat_rw_copy_check_uvector(int
 	}
 	*ret_pointer = iov;
 
+	ret = -EFAULT;
+	if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
+		goto out;
+
 	/*
 	 * Single unix specification:
 	 * We should -EINVAL if an element length is not >= 0 and fitting an
@@ -1103,17 +1107,12 @@ static ssize_t compat_do_readv_writev(in
 	if (!file->f_op)
 		goto out;
 
-	ret = -EFAULT;
-	if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
-		goto out;
-
-	tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
+	ret = compat_rw_copy_check_uvector(type, uvector, nr_segs,
 					       UIO_FASTIOV, iovstack, &iov, 1);
-	if (tot_len == 0) {
-		ret = 0;
+	if (ret <= 0)
 		goto out;
-	}
 
+	tot_len = ret;
 	ret = rw_verify_area(type, file, pos, tot_len);
 	if (ret < 0)
 		goto out;
--- a/mm/process_vm_access.c
+++ b/mm/process_vm_access.c
@@ -434,12 +434,6 @@ compat_process_vm_rw(compat_pid_t pid,
 	if (flags != 0)
 		return -EINVAL;
 
-	if (!access_ok(VERIFY_READ, lvec, liovcnt * sizeof(*lvec)))
-		goto out;
-
-	if (!access_ok(VERIFY_READ, rvec, riovcnt * sizeof(*rvec)))
-		goto out;
-
 	if (vm_write)
 		rc = compat_rw_copy_check_uvector(WRITE, lvec, liovcnt,
 						  UIO_FASTIOV, iovstack_l,
@@ -464,8 +458,6 @@ free_iovecs:
 		kfree(iov_r);
 	if (iov_l != iovstack_l)
 		kfree(iov_l);
-
-out:
 	return rc;
 }
 
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -40,12 +40,12 @@ long compat_keyctl_instantiate_key_iov(
 					   ARRAY_SIZE(iovstack),
 					   iovstack, &iov, 1);
 	if (ret < 0)
-		return ret;
+		goto err;
 	if (ret == 0)
 		goto no_payload_free;
 
 	ret = keyctl_instantiate_key_common(id, iov, ioc, ret, ringid);
-
+err:
 	if (iov != iovstack)
 		kfree(iov);
 	return ret;



  parent reply	other threads:[~2013-03-18  4:48 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-18  4:21 [ 00/82] 3.2.41-stable review Ben Hutchings
2013-03-18  4:21 ` [ 01/82] Revert "powerpc/eeh: Fix crash when adding a device in a slot with DDW" Ben Hutchings
2013-03-18  4:21 ` [ 02/82] btrfs: Init io_lock after cloning btrfs device struct Ben Hutchings
2013-03-18  4:21 ` [ 03/82] md: protect against crash upon fsync on ro array Ben Hutchings
2013-03-18  4:21 ` [ 04/82] NFS: Dont allow NFS silly-renamed files to be deleted, no signal Ben Hutchings
2013-03-18  4:21 ` [ 05/82] SUNRPC: Dont start the retransmission timer when out of socket space Ben Hutchings
2013-03-18  4:21 ` [ 06/82] [SCSI] storvsc: Initialize the sglist Ben Hutchings
2013-03-18  4:21 ` [ 07/82] [SCSI] dc395x: uninitialized variable in device_alloc() Ben Hutchings
2013-03-18  4:21 ` [ 08/82] ARM: VFP: fix emulation of second VFP instruction Ben Hutchings
2013-03-18  4:21 ` [ 09/82] ARM: fix scheduling while atomic warning in alignment handling code Ben Hutchings
2013-03-18  4:21 ` [ 10/82] md: fix two bugs when attempting to resize RAID0 array Ben Hutchings
2013-03-18  4:21 ` [ 11/82] md: raid0: fix error return from create_stripe_zones Ben Hutchings
2013-03-18  4:21 ` [ 12/82] proc connector: reject unprivileged listener bumps Ben Hutchings
2013-03-18  4:21 ` [ 13/82] ath9k: fix RSSI dummy marker value Ben Hutchings
2013-03-18  4:21 ` [ 14/82] ath9k_htc: fix signal strength handling issues Ben Hutchings
2013-03-18  4:21 ` [ 15/82] mwifiex: correct sleep delay counter Ben Hutchings
2013-03-18  4:22 ` [ 16/82] cifs: ensure that cifs_get_root() only traverses directories Ben Hutchings
2013-03-18  4:22 ` [ 17/82] xen/pci: We dont do multiple MSIs Ben Hutchings
2013-03-18  4:22 ` [ 18/82] dm: fix truncated status strings Ben Hutchings
2013-03-18  4:22 ` [ 19/82] dm snapshot: add missing module aliases Ben Hutchings
2013-03-18  4:22 ` [ 20/82] drm/i915: Dont clobber crtc->fb when queue_flip fails Ben Hutchings
2013-03-18  4:22 ` [ 21/82] ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit Ben Hutchings
2013-03-18  4:22 ` [ 22/82] hwmon: (pmbus/ltc2978) Fix peak attribute handling Ben Hutchings
2013-03-18  4:22 ` [ 23/82] hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality Ben Hutchings
2013-03-18  4:22 ` [ 24/82] hwmon: (sht15) Check return value of regulator_enable() Ben Hutchings
2013-03-18  4:22 ` [ 25/82] hw_random: make buffer usable in scatterlist Ben Hutchings
2013-03-18  4:22 ` [ 26/82] ALSA: vmaster: Fix slave change notification Ben Hutchings
2013-03-18  4:22 ` [ 27/82] drm/radeon: add primary dac adj quirk for R200 board Ben Hutchings
2013-03-18  4:22 ` [ 28/82] dmi_scan: fix missing check for _DMI_ signature in smbios_present() Ben Hutchings
2013-03-18  4:22 ` [ 29/82] iwlwifi: always copy first 16 bytes of commands Ben Hutchings
2013-03-18  4:22 ` [ 30/82] HID: add support for Sony RF receiver with USB product id 0x0374 Ben Hutchings
2013-03-18  4:22 ` [ 31/82] HID: clean up quirk for Sony RF receivers Ben Hutchings
2013-03-18  4:22 ` [ 32/82] ahci: AHCI-mode SATA patch for Intel Lynx Point DeviceIDs Ben Hutchings
2013-03-18  4:22 ` [ 33/82] ahci: Add Device IDs for Intel Lynx Point-LP PCH Ben Hutchings
2013-03-18  4:22 ` [ 34/82] ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs Ben Hutchings
2013-03-18  4:22 ` [ 35/82] ahci: Add Device IDs for Intel Wellsburg PCH Ben Hutchings
2013-03-18  4:22 ` [ 36/82] iommu/amd: Initialize device table after dma_ops Ben Hutchings
2013-03-18  4:22 ` [ 37/82] tty: Correct tty buffer flush Ben Hutchings
2013-03-18  4:22 ` [ 38/82] efi_pstore: Check remaining space with QueryVariableInfo() before writing data Ben Hutchings
2013-03-18  4:22 ` [ 39/82] efivars: Disable external interrupt while holding efivars->lock Ben Hutchings
2013-03-18  4:22 ` [ 40/82] efi: be more paranoid about available space when creating variables Ben Hutchings
2013-03-18  4:22 ` [ 41/82] ftrace: Update the kconfig for DYNAMIC_FTRACE Ben Hutchings
2013-03-18  4:22 ` [ 42/82] decnet: Fix disappearing sysctl entries Ben Hutchings
2013-03-18  4:22 ` [ 43/82] Fix memory leak in cpufreq stats Ben Hutchings
2013-03-18  4:22 ` [ 44/82] vfs: fix pipe counter breakage Ben Hutchings
2013-03-18  4:22 ` [ 45/82] USB: EHCI: dont check DMA values in QH overlays Ben Hutchings
2013-03-19  3:09   ` Ben Hutchings
2013-03-19 15:27     ` Alan Stern
2013-03-19 20:31       ` Ben Hutchings
2013-03-18  4:22 ` [ 46/82] xen/pciback: Dont disable a PCI device that is already disabled Ben Hutchings
2013-03-18  4:22 ` [ 47/82] USB: option: add Huawei E5331 Ben Hutchings
2013-03-18  4:22 ` [ 48/82] USB: storage: fix Huawei mode switching regression Ben Hutchings
2013-03-18  4:22 ` [ 49/82] USB: added support for Cinterions products AH6 and PLS8 Ben Hutchings
2013-03-18  4:22 ` [ 50/82] e1000e: fix pci-device enable-counter balance Ben Hutchings
2013-03-18  4:22 ` [ 51/82] virtio: rng: disallow multiple device registrations, fixes crashes Ben Hutchings
2013-03-18  4:22 ` [ 52/82] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Ben Hutchings
2013-03-18  4:22 ` [ 53/82] usb: cp210x new Vendor/Device IDs Ben Hutchings
2013-03-18  4:22 ` [ 54/82] staging: vt6656: Fix oops on resume from suspend Ben Hutchings
2013-03-18  4:22 ` [ 55/82] qcaux: add Franklin U600 Ben Hutchings
2013-03-18  4:22 ` [ 56/82] ext3: Fix format string issues Ben Hutchings
2013-03-18  4:22 ` [ 57/82] keys: fix race with concurrent install_user_keyrings() Ben Hutchings
2013-03-18  4:22 ` [ 58/82] tty/serial: Add support for Altera serial port Ben Hutchings
2013-03-18  4:22 ` [ 59/82] Fix 4 port and add support for 8 port Unknown PCI serial port cards Ben Hutchings
2013-03-18  4:22 ` [ 60/82] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller Ben Hutchings
2013-03-18  4:22 ` [ 61/82] tty: serial: fix typo "ARCH_S5P6450" Ben Hutchings
2013-03-18  4:22 ` [ 62/82] usb: serial: Add Rigblaster Advantage to device table Ben Hutchings
2013-03-18  4:22 ` [ 63/82] w1: fix oops when w1_search is called from netlink connector Ben Hutchings
2013-03-18  4:22 ` [ 64/82] USB: cdc-wdm: fix buffer overflow Ben Hutchings
2013-03-18  4:22 ` [ 65/82] signal: always clear sa_restorer on execve Ben Hutchings
2013-03-18  4:22 ` [ 66/82] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Ben Hutchings
2013-03-18  4:22 ` [ 67/82] hwmon: (pmbus/ltc2978) Fix temperature reporting Ben Hutchings
2013-03-18  4:22 ` [ 68/82] crypto: user - fix info leaks in report API Ben Hutchings
2013-03-18  4:22 ` Ben Hutchings [this message]
2013-03-18  4:22 ` [ 70/82] USB: Dont use EHCI port sempahore for USB 3.0 hubs Ben Hutchings
2013-03-18  4:22 ` [ 71/82] USB: Prepare for refactoring by adding extra udev checks Ben Hutchings
2013-03-18  4:22 ` [ 72/82] USB: Rip out recursive call on warm port reset Ben Hutchings
2013-03-18  4:22 ` [ 73/82] USB: Fix connected device switch to Inactive state Ben Hutchings
2013-03-18  4:22 ` [ 74/82] batman-adv: bat_socket_read missing checks Ben Hutchings
2013-03-18  4:22 ` [ 75/82] batman-adv: Only write requested number of byte to user buffer Ben Hutchings
2013-03-18  4:23 ` [ 76/82] mm/hotplug: correctly add new zone to all other nodes zone lists Ben Hutchings
2013-03-18  4:23 ` [ 77/82] xen-netfront: delay gARP until backend switches to Connected Ben Hutchings
2013-03-18  4:23 ` [ 78/82] block: use i_size_write() in bd_set_size() Ben Hutchings
2013-03-18  4:23 ` [ 79/82] loopdev: fix a deadlock Ben Hutchings
2013-03-18  4:23 ` [ 80/82] loopdev: remove an user triggerable oops Ben Hutchings
2013-03-18  4:23 ` [ 81/82] btrfs: use rcu_barrier() to wait for bdev puts at unmount Ben Hutchings
2013-03-18  4:23 ` [ 82/82] NLS: improve UTF8 -> UTF16 string conversion routine Ben Hutchings
2013-03-18  5:00 ` [ 00/82] 3.2.41-stable review Ben Hutchings

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130318042150.936654279@decadent.org.uk \
    --to=ben@decadent.org.uk \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=viro@ZenIV.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®