Re: [PATCH] Blackfin: bf537: rename "CONFIG_ADT75"

[Jean Delvare <khali@linux-fr.org>]

On Thu, 04 Apr 2013 12:31:06 +0200, Paul Bolle wrote:
> In v3.2 the Analog Devices ADT75 temperature sensor driver was removed
> as an IIO driver and support for it was added to the LM75 HWMON driver.
> But it was apparently overlooked to rename one reference to CONFIG_ADT75
> to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while
> we're at it.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> 0) Also untested.
> 
> 1) See commits e96f9d89e6213c7630a3323cd0c754e7f2619564 ("hwmon: (lm75)
> Add support for Analog Devices ADT75") and
> cdea0bec8d37f2943ae500512b0c178bc76de6e3 ("iio: adc: remove ADT75 driver
> - hwmon/lm75 will take over ADT75 support") for the two patches involved
> in this operation.
> 
>  arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

This breakage is telling us something about the weird approach taken in
this file, methinks.

> diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
> index b40b849..9735345 100644
> --- a/arch/blackfin/mach-bf537/boards/stamp.c
> +++ b/arch/blackfin/mach-bf537/boards/stamp.c
> @@ -2221,7 +2221,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
>  	},
>  #endif
>  
> -#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
> +#if IS_ENABLED(CONFIG_SENSORS_LM75)
>  	{
>  		I2C_BOARD_INFO("adt75", 0x9),

Unrelated to this patch, but this is very odd, as the ADT75 can't have
slave address 0x09. This address is almost exclusively used by battery
chargers AFAIK.

>  		.irq = IRQ_PG5,

The patch itself looks good.

Reviewed-by: Jean Delvare <khali@linux-fr.org>

-- 
Jean Delvare