From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ben Hutchings <bhutchings@solarflare.com>
Subject: [ 9/9 ] sfc: Fix timekeeping in efx_mcdi_poll()
Date: Thu, 11 Apr 2013 19:11:58 -0400 [thread overview]
Message-ID: <20130411231621.274616680@goodmis.org> (raw)
In-Reply-To: <20130411231149.302144972@goodmis.org>
[-- Attachment #1: 0009-sfc-Fix-timekeeping-in-efx_mcdi_poll.patch --]
[-- Type: text/plain, Size: 3051 bytes --]
From: Ben Hutchings <bhutchings@solarflare.com>
[ Upstream commit ebf98e797b4e26ad52ace1511a0b503ee60a6cd4 ]
efx_mcdi_poll() uses get_seconds() to read the current time and to
implement a polling timeout. The use of this function was chosen
partly because it could easily be replaced in a co-sim environment
with a macro that read the simulated time.
Unfortunately the real get_seconds() returns the system time (real
time) which is subject to adjustment by e.g. ntpd. If the system time
is adjusted forward during a polled MCDI operation, the effective
timeout can be shorter than the intended 10 seconds, resulting in a
spurious failure. It is also possible for a backward adjustment to
delay detection of a areal failure.
Use jiffies instead, and change MCDI_RPC_TIMEOUT to be denominated in
jiffies. Also correct rounding of the timeout: check time > finish
(or rather time_after(time, finish)) and not time >= finish.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
drivers/net/ethernet/sfc/mcdi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c
index 319a73e..8407d41 100644
--- a/drivers/net/ethernet/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
@@ -22,7 +22,7 @@
**************************************************************************
*/
-#define MCDI_RPC_TIMEOUT 10 /*seconds */
+#define MCDI_RPC_TIMEOUT (10 * HZ)
#define MCDI_PDU(efx) \
(efx_port_num(efx) ? MC_SMEM_P1_PDU_OFST : MC_SMEM_P0_PDU_OFST)
@@ -120,7 +120,7 @@ static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
static int efx_mcdi_poll(struct efx_nic *efx)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned int time, finish;
+ unsigned long time, finish;
unsigned int respseq, respcmd, error;
unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
unsigned int rc, spins;
@@ -136,7 +136,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
* and poll once a jiffy (approximately)
*/
spins = TICK_USEC;
- finish = get_seconds() + MCDI_RPC_TIMEOUT;
+ finish = jiffies + MCDI_RPC_TIMEOUT;
while (1) {
if (spins != 0) {
@@ -146,7 +146,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
schedule_timeout_uninterruptible(1);
}
- time = get_seconds();
+ time = jiffies;
rmb();
efx_readd(efx, ®, pdu);
@@ -158,7 +158,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
EFX_DWORD_FIELD(reg, MCDI_HEADER_RESPONSE))
break;
- if (time >= finish)
+ if (time_after(time, finish))
return -ETIMEDOUT;
}
@@ -250,7 +250,7 @@ static int efx_mcdi_await_completion(struct efx_nic *efx)
if (wait_event_timeout(
mcdi->wq,
atomic_read(&mcdi->state) == MCDI_STATE_COMPLETED,
- msecs_to_jiffies(MCDI_RPC_TIMEOUT * 1000)) == 0)
+ MCDI_RPC_TIMEOUT) == 0)
return -ETIMEDOUT;
/* Check if efx_mcdi_set_mode() switched us back to polled completions.
--
1.7.10.4
next prev parent reply other threads:[~2013-04-11 23:16 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-11 23:11 [ 0/9 ] 3.6.11.2-stable review (update) Steven Rostedt
2013-04-11 23:11 ` [ 1/9 ] sfc: Disable soft interrupt handling during efx_device_detach_sync() Steven Rostedt
2013-04-11 23:11 ` [ 2/9 ] sfc: Really disable flow control while flushing Steven Rostedt
2013-04-11 23:11 ` [ 3/9 ] sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg() Steven Rostedt
2013-04-11 23:11 ` [ 4/9 ] sfc: Add parentheses around use of bitfield macro arguments Steven Rostedt
2013-04-11 23:11 ` [ 5/9 ] sfc: Fix MCDI structure field lookup Steven Rostedt
2013-04-11 23:11 ` [ 6/9 ] sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES request Steven Rostedt
2013-04-11 23:11 ` [ 7/9 ] sfc: Work-around flush timeout when flushes have completed Steven Rostedt
2013-04-11 23:11 ` [ 8/9 ] sfc: Correctly initialise reset_method in siena_test_chip() Steven Rostedt
2013-04-11 23:11 ` Steven Rostedt [this message]
2013-04-11 23:21 ` [ 0/9 ] 3.6.11.2-stable review (update) Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130411231621.274616680@goodmis.org \
--to=rostedt@goodmis.org \
--cc=bhutchings@solarflare.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome