From: Guenter Roeck <linux@roeck-us.net>
To: Wei Ni <wni@nvidia.com>
Cc: khali@linux-fr.org, swarren@wwwdotorg.org,
thierry.reding@gmail.com, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH v2 1/3] hwmon: (lm90) split set&show temp as common codes
Date: Wed, 10 Jul 2013 11:21:54 -0700 [thread overview]
Message-ID: <20130710182154.GC22430@roeck-us.net> (raw)
In-Reply-To: <1373455539-2831-2-git-send-email-wni@nvidia.com>
On Wed, Jul 10, 2013 at 07:25:37PM +0800, Wei Ni wrote:
> Split set&show temp codes as common functions, so we can use it directly when
> implement linux thermal framework.
>
> Signed-off-by: Wei Ni <wni@nvidia.com>
> ---
> drivers/hwmon/lm90.c | 118 ++++++++++++++++++++++++++++++++------------------
> 1 file changed, 75 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index 8eeb141..2cb7f8e 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -702,29 +702,37 @@ static u16 temp_to_u16_adt7461(struct lm90_data *data, long val)
> * Sysfs stuff
> */
>
> -static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
> - char *buf)
> +static int read_temp8(struct device *dev, int index)
> {
> - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> - struct lm90_data *data = lm90_update_device(dev);
> int temp;
> + struct lm90_data *data = lm90_update_device(dev);
>
Why this reordering of variables ?
> if (data->kind == adt7461)
> - temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
> + temp = temp_from_u8_adt7461(data, data->temp8[index]);
> else if (data->kind == max6646)
> - temp = temp_from_u8(data->temp8[attr->index]);
> + temp = temp_from_u8(data->temp8[index]);
> else
> - temp = temp_from_s8(data->temp8[attr->index]);
> + temp = temp_from_s8(data->temp8[index]);
>
> /* +16 degrees offset for temp2 for the LM99 */
> - if (data->kind == lm99 && attr->index == 3)
> + if (data->kind == lm99 && index == 3)
> temp += 16000;
>
> + return temp;
> +}
> +
> +static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + int temp;
> +
> + temp = read_temp8(dev, attr->index);
> +
> return sprintf(buf, "%d\n", temp);
Might as well simplify with
return sprintf(buf, "%d\n", read_temp8(dev, attr->index));
> }
>
> -static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
> - const char *buf, size_t count)
> +static void write_temp8(struct device *dev, int index, long val)
> {
> static const u8 reg[8] = {
> LM90_REG_W_LOCAL_LOW,
> @@ -737,60 +745,76 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
> MAX6659_REG_W_REMOTE_EMERG,
> };
>
> - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> struct i2c_client *client = to_i2c_client(dev);
> struct lm90_data *data = i2c_get_clientdata(client);
> - int nr = attr->index;
> - long val;
> - int err;
> -
> - err = kstrtol(buf, 10, &val);
> - if (err < 0)
> - return err;
>
> /* +16 degrees offset for temp2 for the LM99 */
> - if (data->kind == lm99 && attr->index == 3)
> + if (data->kind == lm99 && index == 3)
> val -= 16000;
>
> mutex_lock(&data->update_lock);
> if (data->kind == adt7461)
> - data->temp8[nr] = temp_to_u8_adt7461(data, val);
> + data->temp8[index] = temp_to_u8_adt7461(data, val);
> else if (data->kind == max6646)
> - data->temp8[nr] = temp_to_u8(val);
> + data->temp8[index] = temp_to_u8(val);
> else
> - data->temp8[nr] = temp_to_s8(val);
> + data->temp8[index] = temp_to_s8(val);
>
> - lm90_select_remote_channel(client, data, nr >= 6);
> - i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
> + lm90_select_remote_channel(client, data, index >= 6);
> + i2c_smbus_write_byte_data(client, reg[index], data->temp8[index]);
> lm90_select_remote_channel(client, data, 0);
>
> mutex_unlock(&data->update_lock);
> +}
> +
> +static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + int index = attr->index;
> + long val;
> + int err;
> +
> + err = kstrtol(buf, 10, &val);
> + if (err < 0)
> + return err;
> +
> + write_temp8(dev, index, val);
> +
> return count;
> }
>
> -static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
> - char *buf)
> +static int read_temp11(struct device *dev, int index)
> {
> - struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
> - struct lm90_data *data = lm90_update_device(dev);
> int temp;
> + struct lm90_data *data = lm90_update_device(dev);
>
Another unnecessary variable reorder.
> if (data->kind == adt7461)
> - temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
> + temp = temp_from_u16_adt7461(data, data->temp11[index]);
> else if (data->kind == max6646)
> - temp = temp_from_u16(data->temp11[attr->index]);
> + temp = temp_from_u16(data->temp11[index]);
> else
> - temp = temp_from_s16(data->temp11[attr->index]);
> + temp = temp_from_s16(data->temp11[index]);
>
> /* +16 degrees offset for temp2 for the LM99 */
> - if (data->kind == lm99 && attr->index <= 2)
> + if (data->kind == lm99 && index <= 2)
> temp += 16000;
>
> + return temp;
> +}
> +
> +static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
> + int temp;
> +
> + temp = read_temp11(dev, attr->index);
> +
> return sprintf(buf, "%d\n", temp);
Same simplification as above.
> }
>
> -static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
> - const char *buf, size_t count)
> +static void write_temp11(struct device *dev, int nr, int index, long val)
> {
> struct {
> u8 high;
> @@ -804,17 +828,8 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
> { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 }
> };
>
> - struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
> struct i2c_client *client = to_i2c_client(dev);
> struct lm90_data *data = i2c_get_clientdata(client);
> - int nr = attr->nr;
> - int index = attr->index;
> - long val;
> - int err;
> -
> - err = kstrtol(buf, 10, &val);
> - if (err < 0)
> - return err;
>
> /* +16 degrees offset for temp2 for the LM99 */
> if (data->kind == lm99 && index <= 2)
> @@ -839,6 +854,23 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
> lm90_select_remote_channel(client, data, 0);
>
> mutex_unlock(&data->update_lock);
> +}
> +
> +static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
> + int nr = attr->nr;
> + int index = attr->index;
> + long val;
> + int err;
> +
> + err = kstrtol(buf, 10, &val);
> + if (err < 0)
> + return err;
> +
> + write_temp11(dev, nr, index, val);
> +
> return count;
> }
>
> --
> 1.7.9.5
>
>
next prev parent reply other threads:[~2013-07-10 18:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-10 11:25 [PATCH v2 0/3] Lm90 Enhancements Wei Ni
2013-07-10 11:25 ` [PATCH v2 1/3] hwmon: (lm90) split set&show temp as common codes Wei Ni
2013-07-10 18:21 ` Guenter Roeck [this message]
2013-07-11 8:42 ` Wei Ni
2013-07-10 11:25 ` [PATCH v2 2/3] hwmon: (lm90) add support to handle IRQ Wei Ni
2013-07-10 17:05 ` Thierry Reding
2013-07-10 18:12 ` Guenter Roeck
2013-07-10 18:49 ` Thierry Reding
2013-07-11 8:36 ` Wei Ni
2013-07-10 18:18 ` Guenter Roeck
2013-07-11 8:40 ` Wei Ni
2013-07-10 11:25 ` [PATCH v2 3/3] hwmon: (lm90) use enums for the indexes of temp8 and temp11 Wei Ni
2013-07-10 18:25 ` Guenter Roeck
2014-03-04 11:31 [PATCH v2 0/3] expose lm90 to thermal fw Wei Ni
2014-03-04 11:31 ` [PATCH v2 1/3] hwmon: (lm90) split set&show temp as common codes Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130710182154.GC22430@roeck-us.net \
--to=linux@roeck-us.net \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome