From: "H. Peter Anvin" <hpa@linux.intel.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: andrew.cooper3@citrix.com, bp@suse.de, ddutile@redhat.com,
dzickus@redhat.com, hpa@linux.intel.com, hpa@zytor.com,
jbeulich@suse.com, joro@8bytes.org, just.for.lkml@googlemail.com,
linux-kernel@vger.kernel.org, malcolm.crossley@citrix.com,
matt.fleming@intel.com, mingo@kernel.org, nhorman@tuxdriver.com,
prarit@redhat.com, roy.franz@linaro.org, stable@vger.kernel.org,
tglx@linutronix.de
Subject: [GIT PULL] x86 fixes for v3.11-rc5
Date: Mon, 5 Aug 2013 14:18:21 -0700 [thread overview]
Message-ID: <201308052118.r75LILIt008981@terminus.zytor.com> (raw)
Hi Linus,
The following changes since commit b3a3a9c441e2c8f6b6760de9331023a7906a4ac6:
Merge tag 'trace-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace (2013-07-22 19:07:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-urgent-for-linus
for you to fetch changes up to d982057f631df04f8d78321084a1a71ca51f3364:
x86, amd, microcode: Fix error path in apply_microcode_amd() (2013-07-31 08:37:14 -0700)
----------------------------------------------------------------
H.J. Lu (1):
x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz
Ingo Molnar (1):
Merge tag 'efi-urgent' of git://git.kernel.org/.../mfleming/efi into x86/urgent
Neil Horman (1):
x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset
Roy Franz (1):
x86, efi: correct call to free_pages
Torsten Kaiser (1):
x86, amd, microcode: Fix error path in apply_microcode_amd()
arch/x86/boot/compressed/eboot.c | 2 +-
arch/x86/kernel/early-quirks.c | 14 ++++++++++++--
arch/x86/kernel/i387.c | 2 +-
arch/x86/kernel/microcode_amd.c | 9 +++++----
4 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index d606463..b7388a4 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -225,7 +225,7 @@ static void low_free(unsigned long size, unsigned long addr)
unsigned long nr_pages;
nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
- efi_call_phys2(sys_table->boottime->free_pages, addr, size);
+ efi_call_phys2(sys_table->boottime->free_pages, addr, nr_pages);
}
static void find_bits(unsigned long mask, u8 *pos, u8 *size)
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 94ab6b9..63bdb29 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -196,15 +196,23 @@ static void __init ati_bugs_contd(int num, int slot, int func)
static void __init intel_remapping_check(int num, int slot, int func)
{
u8 revision;
+ u16 device;
+ device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
/*
- * Revision 0x13 of this chipset supports irq remapping
- * but has an erratum that breaks its behavior, flag it as such
+ * Revision 13 of all triggering devices id in this quirk have
+ * a problem draining interrupts when irq remapping is enabled,
+ * and should be flagged as broken. Additionally revisions 0x12
+ * and 0x22 of device id 0x3405 has this problem.
*/
if (revision == 0x13)
set_irq_remapping_broken();
+ else if ((device == 0x3405) &&
+ ((revision == 0x12) ||
+ (revision == 0x22)))
+ set_irq_remapping_broken();
}
@@ -239,6 +247,8 @@ static struct chipset early_qrk[] __initdata = {
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
{ PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
+ { PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST,
+ PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 202d24f..5d576ab 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -116,7 +116,7 @@ static void mxcsr_feature_mask_init(void)
if (cpu_has_fxsr) {
memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
- asm volatile("fxsave %0" : : "m" (fx_scratch));
+ asm volatile("fxsave %0" : "+m" (fx_scratch));
mask = fx_scratch.mxcsr_mask;
if (mask == 0)
mask = 0x0000ffbf;
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 47ebb1d..7a0adb7 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -220,12 +220,13 @@ int apply_microcode_amd(int cpu)
return 0;
}
- if (__apply_microcode_amd(mc_amd))
+ if (__apply_microcode_amd(mc_amd)) {
pr_err("CPU%d: update failed for patch_level=0x%08x\n",
cpu, mc_amd->hdr.patch_id);
- else
- pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
- mc_amd->hdr.patch_id);
+ return -1;
+ }
+ pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
+ mc_amd->hdr.patch_id);
uci->cpu_sig.rev = mc_amd->hdr.patch_id;
c->microcode = mc_amd->hdr.patch_id;
reply other threads:[~2013-08-05 21:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201308052118.r75LILIt008981@terminus.zytor.com \
--to=hpa@linux.intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=bp@suse.de \
--cc=ddutile@redhat.com \
--cc=dzickus@redhat.com \
--cc=hpa@zytor.com \
--cc=jbeulich@suse.com \
--cc=joro@8bytes.org \
--cc=just.for.lkml@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=malcolm.crossley@citrix.com \
--cc=matt.fleming@intel.com \
--cc=mingo@kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=prarit@redhat.com \
--cc=roy.franz@linaro.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®