From: Guenter Roeck <linux@roeck-us.net>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: Jean Delvare <khali@linux-fr.org>,
swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
rui.zhang@intel.com, wni@nvidia.com, grant.likely@linaro.org,
durgadoss.r@intel.com, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, lm-sensors@lm-sensors.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes
Date: Mon, 18 Nov 2013 08:25:32 -0800 [thread overview]
Message-ID: <20131118162532.GB15610@roeck-us.net> (raw)
In-Reply-To: <528A23DD.2070406@ti.com>
On Mon, Nov 18, 2013 at 10:27:41AM -0400, Eduardo Valentin wrote:
> On 15-11-2013 03:43, Jean Delvare wrote:
> > Hi Eduardo,
> >
>
> Hello Jean!
>
> > Sorry for joining the discussion a little late, I could never find the
> > time to look into this patch series so far.
>
> Well, better late than never, that's what it is said, isn't it? :-)
> Thanks for arranging the time to look at these patches.
>
> The patch series have been looked and contributed by several people and
> a couple o maintainers now. Starts to be way better than the original
> RFC. The core idea still holds though.
>
> >
> > On Tue, 12 Nov 2013 15:46:08 -0400, Eduardo Valentin wrote:
> >> This patch adds to lm75 temperature sensor the possibility
> >> to expose itself as thermal zone device, registered on the
> >> thermal framework.
> >>
> >> The thermal zone is built only if a device tree node
> >> describing a thermal zone for this sensor is present
> >> inside the lm75 DT node. Otherwise, the driver behavior
> >> will be the same.
> >>
> >> Cc: Jean Delvare <khali@linux-fr.org>
> >> Cc: lm-sensors@lm-sensors.org
> >> Cc: linux-kernel@vger.kernel.org
> >> Acked-by: Guenter Roeck <linux@roeck-us.net>
>
> On HWMON side, I got Guenter's solid contributions, as you can see.
>
Not an argument. I am not perfect, and Jean has a number of valid points.
Guenter
next prev parent reply other threads:[~2013-11-18 16:25 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-12 19:46 [PATCHv5 00/20] device thermal limits represented in device tree nodes (v5) Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 01/20] thermal: allow registering without .get_temp Eduardo Valentin
2013-11-12 19:46 ` [PATCHv9 02/20] thermal: introduce device tree parser Eduardo Valentin
2013-11-13 16:57 ` Tomasz Figa
2013-11-14 11:31 ` Eduardo Valentin
2013-11-14 13:40 ` Tomasz Figa
2013-11-15 13:19 ` Eduardo Valentin
2013-11-21 14:57 ` Tomasz Figa
2013-11-21 15:48 ` Eduardo Valentin
2013-11-21 16:32 ` Tomasz Figa
2013-11-22 12:33 ` Eduardo Valentin
2013-11-25 15:31 ` Mark Rutland
2013-11-25 15:40 ` Eduardo Valentin
2013-11-25 15:41 ` Eduardo Valentin
2013-11-25 15:14 ` Mark Rutland
2013-11-25 15:34 ` Eduardo Valentin
2013-11-15 8:07 ` [lm-sensors] " Jean Delvare
2013-11-18 6:04 ` Zhang Rui
2013-11-18 14:45 ` Eduardo Valentin
2013-11-19 14:43 ` Jean Delvare
2013-11-25 15:37 ` Mark Rutland
2013-11-25 15:47 ` Eduardo Valentin
2013-12-31 10:17 ` Wei Ni
2014-01-07 2:48 ` Wei Ni
2014-01-07 11:17 ` Eduardo Valentin
2014-01-08 3:19 ` Wei Ni
[not found] ` <CAHqbYQvchi3QSgcitUtguFyOJtXhFt5OjcoiSDZnPg9ZyiN4cg@mail.gmail.com>
2014-01-08 4:16 ` Wei Ni
2014-01-02 2:55 ` Wei Ni
2014-01-02 3:03 ` Wei Ni
2014-01-02 2:59 ` Wei Ni
2014-01-02 17:50 ` Matthew Longnecker
2014-01-06 13:51 ` Mark Rutland
2014-01-06 14:54 ` Eduardo Valentin
2014-01-07 2:44 ` Wei Ni
2014-01-07 12:02 ` Mark Rutland
2014-01-13 21:29 ` Eduardo Valentin
2014-01-14 2:54 ` Wei Ni
2014-01-14 18:48 ` Eduardo Valentin
2014-01-13 15:37 ` Eduardo Valentin
2014-01-02 17:35 ` Matthew Longnecker
2014-01-06 18:52 ` Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 03/20] thermal: core: introduce thermal_of_cooling_device_register Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 04/20] thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-11-14 13:17 ` Eduardo Valentin
2013-11-14 22:04 ` Rafael J. Wysocki
2013-11-15 4:41 ` viresh kumar
2014-01-12 14:31 ` Zhang, Rui
2014-01-13 15:08 ` Eduardo Valentin
2014-01-14 19:07 ` Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-11-15 7:43 ` Jean Delvare
2013-11-18 14:27 ` Eduardo Valentin
2013-11-18 16:25 ` Guenter Roeck [this message]
2013-11-18 16:40 ` Eduardo Valentin
2013-11-19 9:39 ` Jean Delvare
2013-11-22 14:37 ` Eduardo Valentin
2013-11-23 18:38 ` Jean Delvare
2013-11-12 19:46 ` [PATCHv5 07/20] hwmon: tmp102: " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 08/20] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 09/20] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 10/20] arm: dts: add omap4430 " Eduardo Valentin
2013-11-20 12:32 ` Pavel Machek
2013-11-21 15:36 ` Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 11/20] arm: dts: add omap4460 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 12/20] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 13/20] arm: dts: add cooling properties on omap4460 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 14/20] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 15/20] arm: dts: add omap5 CORE " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 16/20] arm: dts: add omap5 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 17/20] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 18/20] arm: dts: make OMAP443x bandgap node to belong to OCP Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 19/20] arm: dts: make OMAP4460 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 20/20] MAINTAINERS: add maintainer entry for thermal bindings Eduardo Valentin
2013-11-12 19:59 ` Olof Johansson
2013-11-12 20:14 ` Eduardo Valentin
2013-11-13 9:42 ` Mark Rutland
2013-11-13 12:17 ` Eduardo Valentin
2013-11-13 14:46 ` Eduardo Valentin
2013-11-14 13:30 ` [PATCHv6 20/20] MAINTAINERS: add thermal bindings entry in thermal domain Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131118162532.GB15610@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=durgadoss.r@intel.com \
--cc=eduardo.valentin@ti.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®