Re: [alsa-devel] [PATCH v2 1/3] ASoC: binding: add tdm-slot.txt

[Mark Brown <broonie@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1209 bytes --]

On Wed, Feb 12, 2014 at 10:26:52AM +0100, Lars-Peter Clausen wrote:

> The current internal API for TDM is very poor, I don't think we want
> to expose that 1 to 1 to the devicetree. Since this means we'd have
> to support that forever. The first thing is that the semantics of
> snd_soc_dai_set_tdm_slot() are very unclear. E.g. some drivers use a
> zero bit for a active slot, some drivers use a 1 bit for a active

Yes, and if we do end up using masks we need to nail down what's going
on in the DT.

> slot. The second thing is that we are not able to specify which
> channel should be mapped to which slot. You can merely specify
> from/to which slots the CODEC should read/write and then it is up to
> the driver to guess which channel should go to which slot. In my
> opinion a binding that allows to specify a explicit mapping of which
> channel goes to which slot would be much better.

It'd certainly be good to be able to do that, though having a default
would make life easier.

> Also those are four different settings. In my opinion they should
> not be expressed in one property, but rather in four. E.g.
> specifying a tx_mask for a rx only device does not make much sense.

That makes sense.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]