From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756979AbaCDLs1 (ORCPT ); Tue, 4 Mar 2014 06:48:27 -0500 Received: from mail-pd0-f178.google.com ([209.85.192.178]:47602 "EHLO mail-pd0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756650AbaCDLsZ (ORCPT ); Tue, 4 Mar 2014 06:48:25 -0500 Date: Tue, 4 Mar 2014 17:18:14 +0530 From: yogesh To: LKML Cc: Joe Perches , Levente Kurusa Subject: [PATCH 1/1] Add documentation for proper usage and order of preference of calls to print diagnostic messages. Message-ID: <20140304114814.GA28031@yogesh-Dell-System-XPS-L502X> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds documentation that clarifies the use of various diagnostic printing messages. It shows the preference of subsystem_dbg calls to dev_dbg (whenever possible), as the first preferred format of logging debug messages. Signed-off-by: Yogesh Chaudhari --- Documentation/CodingStyle | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 7fe0546..9e0de25 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -662,6 +662,20 @@ and driver, and are tagged with the right level: dev_err(), dev_warn(), dev_info(), and so forth. For messages that aren't associated with a particular device, defines pr_debug() and pr_info(). +If the subsystem has its own diagnostic macros then they should be used +instead of dev_dbg calls. +e.g. If you are using network subsystem, use netdev_dbg; +if you are using V4L, use v4l_dbg etc. +This standardises the output format in every subsystem. + +Depending on your changes, the following order of precedence +applies to printing messages: +1. [subsystem]_dbg() is preferred when you the +subsystem has its own diagnostic macros. +2. dev_dbg() is preferred when you have a generic struct device object. +3. pr_debug() is used when 1 and 2 above are not applicable. +4. printk() should be avoided. + Coming up with good debugging messages can be quite a challenge; and once you have them, they can be a huge help for remote troubleshooting. Such messages should be compiled out when the DEBUG symbol is not defined (that