Re: [PATCH 2/2] arm64: dts: exynos: added mailbox node

[Mark Rutland <mark.rutland@arm.com>]

On Mon, Mar 17, 2014 at 12:03:59PM +0000, Girish K S wrote:
> This patch adds the dt node for the mailbox IP
> 
> Signed-off-by: Girish K S <ks.giri@samsung.com>
> 
> Change-Id: I35e45e9a62592887a84a909aee54f259a2f731fa
> ---
>  .../bindings/mailbox/samsung-mailbox.txt           |   24 +++++++
>  arch/arm64/boot/dts/samsung-gh7.dtsi               |   66 ++++++++++++++++++++
>  arch/arm64/boot/dts/samsung-ssdk-gh7.dts           |    3 +
>  3 files changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/samsung-mailbox.txt
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/samsung-mailbox.txt b/Documentation/devicetree/bindings/mailbox/samsung-mailbox.txt
> new file mode 100644
> index 0000000..1908d71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/samsung-mailbox.txt
> @@ -0,0 +1,24 @@
> +
> +Samsung Mailbox Driver
> +
> +Required properties:
> +- compatible:		Should be one of the following,
> +			    "samsung,gh7-mailbox" for
> +				Samsung GH7 SoC series
> +			    "samsung,exynos-mailbox" for
> +				exynosx SoC series
> +- reg:			Contains the mailbox register address range (base address
> +			and length)
> +- interrupts: 		Contains the interrupt information for the mailbox
> +			device.

How many interrupts?

What are they for?

> +- samsung,mbox-names:	Array of the names of the mailboxes

Juding by the code there is one name per reg entry, but the description
above implies a single entry (as all the dt fragments have).

What values are expected? What is the consumer of these values? What are
they used for?

> +
> +Example:
> +
> +/* Samsung GH7 SoC */
> +mailbox@100a0000 {
> +	compatible = "samsung,gh7-mailbox";
> +	reg = <0x0 0x100a0000 0x0 0x1000>;
> +	interrupts = <0 310 0>;
> +	samsung,mbox-names = "a7q-scp";
> +};
> diff --git a/arch/arm64/boot/dts/samsung-gh7.dtsi b/arch/arm64/boot/dts/samsung-gh7.dtsi
> index c3610bd..be4cce9 100644
> --- a/arch/arm64/boot/dts/samsung-gh7.dtsi
> +++ b/arch/arm64/boot/dts/samsung-gh7.dtsi
> @@ -107,5 +107,71 @@
>  			interrupts = <0 420 0>;
>  			arm,primecell-periphid = <0x341011>; /* HACK */

This looks odd.

What tree is this against?

Cheers,
Mark.