From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753375AbaCaHKW (ORCPT ); Mon, 31 Mar 2014 03:10:22 -0400 Received: from metis.ext.pengutronix.de ([92.198.50.35]:55502 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753283AbaCaHKS (ORCPT ); Mon, 31 Mar 2014 03:10:18 -0400 Date: Mon, 31 Mar 2014 09:10:15 +0200 From: Sascha Hauer To: Grant Likely Cc: devicetree@vger.kernel.org, christoffer.dall@linaro.org, linux-kernel@vger.kernel.org, olof@lixom.net, benh@kernel.crashing.org, rob.herring@linaro.org Subject: Re: [RFC 0/5] of: Automatic console registration cleanups Message-ID: <20140331071014.GN17250@pengutronix.de> References: <1396022885-6102-1-git-send-email-grant.likely@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1396022885-6102-1-git-send-email-grant.likely@linaro.org> X-Sent-From: Pengutronix Hildesheim X-URL: http://www.pengutronix.de/ X-IRC: #ptxdist @freenode X-Accept-Language: de,en X-Accept-Content-Type: text/plain X-Uptime: 09:05:09 up 218 days, 16:35, 47 users, load average: 0.11, 0.25, 0.22 User-Agent: Mutt/1.5.21 (2010-09-15) X-SA-Exim-Connect-IP: 2001:6f8:1178:2:5054:ff:fec0:8e10 X-SA-Exim-Mail-From: sha@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Mar 28, 2014 at 09:08:00AM -0700, Grant Likely wrote: > Hi all, > > This is a series that I've been playing with over the last few days to > clean up the selection of default console devices when using the device > tree. The device tree defines a way of specifying the console by using a > "stdout-path" property in the /chosen node, but very few drivers > actually attempt to use that data, and so for most platforms there needs > to be a "console=" line in the command line if a serial port is intended > to be used as the console. > > With this series, if there is a /chosen/stdout-path property, and if > that property points to a serial port node, then when the serial driver > registers the port, the core uart_add_one_port() function will notice > and if no console= argument was provided then add it as a preferred > console. > > I've not tested this very extensively yet, but I want to get some > feedback before I go further. I gave it a test on i.MX. It works as expected with both linux,stdout-path and stdout-path. Specifying a console on the commandline still works and overrides the devicetree setting. Tested-by: Sascha Hauer Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |