Re: [PATCH] usb: phy: tahvo: Use devm_extcon_dev_* function for resource management of extcon

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 4479 bytes --]

On Wed, Apr 23, 2014 at 01:12:43PM +0900, Chanwoo Choi wrote:
> This patch uses devm_extcon_dev_{allocate, register} function for automatically
> resource management of extcon device instead of legacy method and simplifies
> the behavior of register/unregister for extcon device.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Aaro, if you can give me your Tested-by and/or Acked-by, I'll take this
to v3.16

> ---
> This patch has dependency about following patches[1-2]:
> [1] https://lkml.org/lkml/2014/4/21/140
> [2] https://lkml.org/lkml/2014/4/21/164
> 
>  drivers/usb/phy/phy-tahvo.c | 29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
> index cc61ee4..8cde928 100644
> --- a/drivers/usb/phy/phy-tahvo.c
> +++ b/drivers/usb/phy/phy-tahvo.c
> @@ -57,7 +57,7 @@ struct tahvo_usb {
>  	struct clk		*ick;
>  	int			irq;
>  	int			tahvo_mode;
> -	struct extcon_dev	extcon;
> +	struct extcon_dev	*extcon;
>  };
>  
>  static const char *tahvo_cable[] = {
> @@ -118,7 +118,7 @@ static void check_vbus_state(struct tahvo_usb *tu)
>  	prev_state = tu->vbus_state;
>  	tu->vbus_state = reg & TAHVO_STAT_VBUS;
>  	if (prev_state != tu->vbus_state) {
> -		extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
> +		extcon_set_cable_state(tu->extcon, "USB", tu->vbus_state);
>  		sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
>  	}
>  }
> @@ -127,7 +127,7 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
>  {
>  	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
>  
> -	extcon_set_cable_state(&tu->extcon, "USB-HOST", true);
> +	extcon_set_cable_state(tu->extcon, "USB-HOST", true);
>  
>  	/* Power up the transceiver in USB host mode */
>  	retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
> @@ -146,7 +146,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
>  {
>  	struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
>  
> -	extcon_set_cable_state(&tu->extcon, "USB-HOST", false);
> +	extcon_set_cable_state(tu->extcon, "USB-HOST", false);
>  
>  	/* Power up transceiver and set it in USB peripheral mode */
>  	retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
> @@ -360,11 +360,15 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>  	 */
>  	tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS;
>  
> -	tu->extcon.name = DRIVER_NAME;
> -	tu->extcon.supported_cable = tahvo_cable;
> -	tu->extcon.dev.parent = &pdev->dev;
> +	tu->extcon = devm_extcon_dev_allocate(&pdev->dev, tahvo_cable);
> +	if (!tu->extcon) {
> +		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
> +		return -ENOMEM;
> +	}
> +	tu->extcon->name = DRIVER_NAME;
> +	tu->extcon->dev.parent = &pdev->dev;
>  
> -	ret = extcon_dev_register(&tu->extcon);
> +	ret = devm_extcon_dev_register(&pdev->dev, tu->extcon);
>  	if (ret) {
>  		dev_err(&pdev->dev, "could not register extcon device: %d\n",
>  			ret);
> @@ -372,9 +376,9 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>  	}
>  
>  	/* Set the initial cable state. */
> -	extcon_set_cable_state(&tu->extcon, "USB-HOST",
> +	extcon_set_cable_state(tu->extcon, "USB-HOST",
>  			       tu->tahvo_mode == TAHVO_MODE_HOST);
> -	extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
> +	extcon_set_cable_state(tu->extcon, "USB", tu->vbus_state);
>  
>  	/* Create OTG interface */
>  	tahvo_usb_power_off(tu);
> @@ -391,7 +395,7 @@ static int tahvo_usb_probe(struct platform_device *pdev)
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "cannot register USB transceiver: %d\n",
>  			ret);
> -		goto err_extcon_unreg;
> +		goto err_disable_clk;
>  	}
>  
>  	dev_set_drvdata(&pdev->dev, tu);
> @@ -418,8 +422,6 @@ err_free_irq:
>  	free_irq(tu->irq, tu);
>  err_remove_phy:
>  	usb_remove_phy(&tu->phy);
> -err_extcon_unreg:
> -	extcon_dev_unregister(&tu->extcon);
>  err_disable_clk:
>  	if (!IS_ERR(tu->ick))
>  		clk_disable(tu->ick);
> @@ -434,7 +436,6 @@ static int tahvo_usb_remove(struct platform_device *pdev)
>  	sysfs_remove_group(&pdev->dev.kobj, &tahvo_attr_group);
>  	free_irq(tu->irq, tu);
>  	usb_remove_phy(&tu->phy);
> -	extcon_dev_unregister(&tu->extcon);
>  	if (!IS_ERR(tu->ick))
>  		clk_disable(tu->ick);
>  
> -- 
> 1.8.0
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]