Re: [PATCH 0/4] acerhdf/thermal: adding new models and appropriate governor

[Andreas Mohr <andi@lisas.de>]

Hi,

On Sun, Apr 27, 2014 at 03:23:31AM +0200, Peter Feuerer wrote:
> Hi,
> 
> finally I found time, to do some work on acerhdf.

Heh, yeah. I'm starting to come to the realization
that once having entered an "extended" state of life
it might be better to "take" the time rather than "have" it ;-P

> This patch series is intended to:
> 
>   * Introduce "manual mode" support (Patch 1 & 2), which is needed to control
>     the fan of a few new models.  Unfortunately this extends lines defining
>     the bios table over 80 characters, but all other methods make the code
>     really ugly and hard to read.  So I hope for the reason of readability it
>     is ok to break this rule.

Hmm... got an idea there. Possibly it's time to do away with direct
"device name" <-> open-coded config data mappings.
After all a specific device name is not really all too meaningful,
can (and will) be invented out of thin air, with its reg config being
identical to (read: painfully duplicated)
several other names/BIOS versions in the series.
So perhaps one should have a helper struct defined,
with instances then named as particular base samples of a model series
(ideally named after the precise internal development code name of the series),
to then be referenced by all model/BIOS names which match.

struct {
  struct reg_feat_1;
  struct reg_feat_2;
} aao_reg_map;

static const aao_reg_map aao_reg_map_AOAxxx_Acer_orig_version;




{ "Acer", "AOA1....", &aao_reg_map_AOAxxx_Acer_orig_version },

Of course you then have the indirection of device name <-> specific
register values (quote: "really ugly and hard to read"?),
but IMHO that's ok since normally you wouldn't be too focused
on looking up register values (...right!?).

And if the next interface-breaking config change came along,
you'd otherwise have to add yet another register index pair...
(at which point some 100+ char line monsters
would be breathing down our neck...)




Model additions:
Ain't there one MODULE_ALIAS missing?? (7 new models <-> 6 entries!?!?)
    "Aspire One 753"? But perhaps that's already implicitly covered by
another existing entry? [if so, the commit log did not mention it ;)]


>   * Add an appropriate thermal governor (Patch 3 & 4).  Manipulating and
>     fiddling around with the step-wise governor has been a very fragile thing
>     in the past and as it broke again, I used the opportunity to add a two
>     point thermal governor which implements the actual fan handling required by
>     acerhdf and puts from my point of view things straight.

I'm afraid I don't have the full picture,
but so far it seems that this factoring out of common handling
is a very good idea.



-       depends on THERMAL && ACPI
+       depends on THERMAL && ACPI && THERMAL_GOV_BANG_BANG
Do we actively depend on THERMAL (code-wise, I mean?) Or is it now an
implicit dependency given that we request THERMAL_GOV_BANG_BANG? If
implicit, then THERMAL probably ought to be removed. But if we use
generic thermal APIs (which we probably do), then of course we do have
that dependency....



"bang_bang_throttle - throttles devices asscciated with the given zone"

Typo ;)


"used to force thermal" --> misleading ("we used to do this, but it's
bad so we better do that").

"intended to"? "established to"? "added to"? or some simpler wording?


pr_err("Thermal governor %s is not compiled into thermal subsystem\n"
    --> you are lying here... (the only thing we can reliably indicate
        is that we did not get the expected name -
        so we should perhaps indicate something like we "didn't get bang-bang,
        since perhaps not compiled into thermal subsystem").




> Please test/review the patches and send me your comments.

-ENODATA (my crappy JMicron JMF601 SSD had managed to break again,
    this time with fatal firmware corruption, so I had to reflash
    firmware to resurrect it, but I haven't restored my environment yet,
    but I'll obviously report back immediately if something comes up)


> Thanks and kind regards,

Thanks definitely ought to go to the active party instead! :)

Andreas Mohr