From: Olof Johansson <olof@lixom.net>
To: torvalds@linux-foundation.org
Cc: olof@lixom.net, arm@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [GIT PULL] ARM: SoC fixes for 3.16-rc
Date: Sun, 13 Jul 2014 11:30:06 -0700 [thread overview]
Message-ID: <20140713183006.GA30422@quad.lixom.net> (raw)
Hi Linus,
The following changes since commit cd3de83f147601356395b57a8673e9c5ff1e59d1:
Linux 3.16-rc4 (2014-07-06 12:37:51 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/fixes-for-linus
for you to fetch changes up to cacadb4ff969a82628d47db87b5a531be466b134:
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes (2014-07-12 21:19:21 -0700)
----------------------------------------------------------------
ARM: SoC fixes for 3.16-rc
This week's arm-soc fixes:
- Another set of OMAP fixes
* Clock fixes
* Restart handling
* PHY regulators
* SATA hwmod data for DRA7
+ Some trivial fixes and removal of a bit of dead code
- Exynos fixes
* A bunch of clock fixes
* Some SMP fixes
* Exynos multi-core timer: register as clocksource and fix ftrace.
+ a few other minor fixes
There's also a couple more patches, and at91 fix for USB caused by common
clock conversion, and more MAINTAINERS entries for shmobile.
We're definitely switching to only regression fixes from here on out,
we've been a little less strict than usual up until now.
----------------------------------------------------------------
Abhilash Kesavan (1):
ARM: EXYNOS: Fix the check for non-smp configuration
Amit Daniel Kachhap (1):
clocksource: exynos_mct: Register the timer for stable udelay
Arun Kumar K (2):
clk: exynos5420: Add IDs for clocks used in PD mfc
ARM: dts: Add clock property for mfc_pd in exynos5420
Bo Shen (1):
ARM: at91: at91sam9x5: add clocks for usb device
Doug Anderson (1):
clocksource: exynos_mct: Fix ftrace
Enric Balletbo i Serra (1):
ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.
Guido Martínez (1):
ARM: OMAP2+: Make GPMC skip disabled devices
Jaewon Kim (1):
ARM: dts: fix pwm-cells in pwm node for exynos4
Jyri Sarha (1):
ARM: OMAP2+: Remove non working OMAP HDMI audio initialization
Nishanth Menon (1):
ARM: DRA7/AM43XX: fix header definition for omap44xx_restart
Olof Johansson (4):
Merge tag 'renesas-maintainers-for-v3.17' of git://git.kernel.org/.../horms/renesas into fixes
Merge tag 'samsung-fixes-2' of git://git.kernel.org/.../kgene/linux-samsung into fixes
Merge tag 'omap-for-v3.16/fixes-rc4' of git://git.kernel.org/.../tmlind/linux-omap into fixes
Merge tag 'samsung-fixes-3' of git://git.kernel.org/.../kgene/linux-samsung into fixes
Peter Ujfalusi (2):
ARM: dts: am335x-evm: Enable the McASP FIFO for audio
ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio
Prathyush K (1):
ARM: EXYNOS: Add support for clock handling in power domain
Rajendra Nayak (1):
ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates
Roger Quadros (3):
ARM: DRA7: hwmod: Fixup SATA hwmod
ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss
ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on
Sachin Kamat (1):
ARM: EXYNOS: Update secondary boot addr for secure mode
Shawn Guo (1):
ARM: imx: fix shared gate clock
Simon Horman (1):
ARM: shmobile: Add DT and defconfigs to MAINTAINERS
Suman Anna (2):
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
ARM: OMAP2+: create dsp device only on OMAP3 SoCs
Tero Kristo (1):
ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow
Tomasz Figa (1):
ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250
Tony Lindgren (2):
Merge branch 'for-v3.16-rc/clk-dt-fixes' of https://github.com/t-kristo/linux-pm into fixes-rc4
Merge tag 'for-v3.16-rc/omap-fixes-b' of git://git.kernel.org/.../pjw/omap-pending into omap-for-v3.16/fixes
Tushar Behera (1):
ARM: dts: Update the parent for Audss clocks in Exynos5420
.../bindings/arm/exynos/power_domain.txt | 20 +++++++
MAINTAINERS | 14 +++++
arch/arm/boot/dts/am335x-evm.dts | 4 +-
arch/arm/boot/dts/am335x-evmsk.dts | 4 +-
arch/arm/boot/dts/am335x-igep0033.dtsi | 6 +++
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +
arch/arm/boot/dts/dra7-evm.dts | 1 +
arch/arm/boot/dts/dra7xx-clocks.dtsi | 10 ++--
arch/arm/boot/dts/exynos4.dtsi | 2 +-
arch/arm/boot/dts/exynos5420.dtsi | 5 +-
arch/arm/mach-exynos/exynos.c | 8 ++-
arch/arm/mach-exynos/firmware.c | 9 +++-
arch/arm/mach-exynos/pm_domains.c | 61 +++++++++++++++++++++-
arch/arm/mach-imx/clk-gate2.c | 31 ++++++++---
arch/arm/mach-omap2/clkt_dpll.c | 2 +-
arch/arm/mach-omap2/cm-regbits-34xx.h | 3 ++
arch/arm/mach-omap2/common.h | 3 +-
arch/arm/mach-omap2/devices.c | 28 ----------
arch/arm/mach-omap2/dsp.c | 10 ++++
arch/arm/mach-omap2/gpmc.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 18 +++++--
arch/arm/mach-omap2/prm-regbits-34xx.h | 6 +++
drivers/clk/samsung/clk-exynos5420.c | 6 ++-
drivers/clocksource/exynos_mct.c | 20 ++++++-
include/dt-bindings/clock/exynos5420.h | 2 +
25 files changed, 211 insertions(+), 66 deletions(-)
next reply other threads:[~2014-07-13 18:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-13 18:30 Olof Johansson [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-07-19 5:49 Olof Johansson
2014-07-05 19:49 Olof Johansson
2014-07-06 20:05 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140713183006.GA30422@quad.lixom.net \
--to=olof@lixom.net \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome