From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756944AbaIEJsI (ORCPT ); Fri, 5 Sep 2014 05:48:08 -0400 Received: from gw-1.arm.linux.org.uk ([78.32.30.217]:43754 "EHLO pandora.arm.linux.org.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756600AbaIEJsC (ORCPT ); Fri, 5 Sep 2014 05:48:02 -0400 Date: Fri, 5 Sep 2014 10:47:47 +0100 From: Russell King - ARM Linux To: Anders Berg Cc: Linus Walleij , Alexandre Courbot , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org Subject: Re: [PATCH 1/2] gpio: Add driver for AXM55xx SSP chip selects Message-ID: <20140905094747.GE30401@n2100.arm.linux.org.uk> References: <1409576021-24828-1-git-send-email-anders.berg@avagotech.com> <1409576021-24828-2-git-send-email-anders.berg@avagotech.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1409576021-24828-2-git-send-email-anders.berg@avagotech.com> User-Agent: Mutt/1.5.19 (2009-01-05) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Sep 01, 2014 at 02:53:40PM +0200, Anders Berg wrote: > The AXM55xx device has a ARM PL022 SSP controller with an extension that > enables the control of up to five chip select signals. This driver implements > the logic to control these signals and exports them as GPIOs. > > Signed-off-by: Anders Berg So, what happens if the GPIO driver binds first, followed by the SSP device? Please test that scenario out before this patch gets merged. -- FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up according to speedtest.net.