From: Bjorn Helgaas <bhelgaas@google.com>
To: "Chen, Gong" <gong.chen@linux.intel.com>
Cc: rdunlap@infradead.org, bp@alien8.de, tony.luck@intel.com,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND 2/5] PCIe, AER: Replenish missed AER status bits for AER driver
Date: Fri, 5 Sep 2014 17:15:43 -0600 [thread overview]
Message-ID: <20140905231543.GK8080@google.com> (raw)
In-Reply-To: <1407910961-7798-3-git-send-email-gong.chen@linux.intel.com>
On Wed, Aug 13, 2014 at 02:22:38AM -0400, Chen, Gong wrote:
> Since commit 6c2b374d is commited, the capability of PCI-e AER
> has changed a lot. This patch adds all missed CE/UC error bits
> existed in PCI-e SPEC r3.0. Meanwhile, adjust the code format
> to make it simpler to read/maintain.
>
> Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
> ---
> drivers/pci/pcie/aer/aerdrv_errprint.c | 60 ++++++++++++++--------------------
> 1 file changed, 25 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
> index 35d06e177917..5c4f7e252e5e 100644
> --- a/drivers/pci/pcie/aer/aerdrv_errprint.c
> +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
> @@ -75,44 +75,34 @@ static const char *aer_error_layer[] = {
> };
>
> static const char *aer_correctable_error_string[] = {
> - "Receiver Error", /* Bit Position 0 */
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - "Bad TLP", /* Bit Position 6 */
> - "Bad DLLP", /* Bit Position 7 */
> - "RELAY_NUM Rollover", /* Bit Position 8 */
> - NULL,
> - NULL,
> - NULL,
> - "Replay Timer Timeout", /* Bit Position 12 */
> - "Advisory Non-Fatal", /* Bit Position 13 */
> + [0] = "Receiver Error",
> + [6] = "Bad TLP",
> + [7] = "Bad DLLP",
> + [8] = "RELAY_NUM Rollover",
> + [12] = "Replay Timer Timeout",
> + [13] = "Advisory Non-Fatal Error",
> + [14] = "Corrected Internal Error",
> + [15] = "Header Log Overflow",
You replaced bare numbers with the existing #defines in the previous patch
(thank you), but now we're adding them here. I'm pretty sure you can use
the #defines here, e.g.,
[PCI_ERR_COR_RCVR] = "Receiver Error",
In fact, it would be really nice if you could figure out a way to have only
one set of these strings. Right now, we have the set in
include/ras/ras_event.h, and then another set here in aerdrv_errprint.c,
and they contain exactly the same information.
Bjorn
> };
>
> static const char *aer_uncorrectable_error_string[] = {
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - "Data Link Protocol", /* Bit Position 4 */
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - NULL,
> - "Poisoned TLP", /* Bit Position 12 */
> - "Flow Control Protocol", /* Bit Position 13 */
> - "Completion Timeout", /* Bit Position 14 */
> - "Completer Abort", /* Bit Position 15 */
> - "Unexpected Completion", /* Bit Position 16 */
> - "Receiver Overflow", /* Bit Position 17 */
> - "Malformed TLP", /* Bit Position 18 */
> - "ECRC", /* Bit Position 19 */
> - "Unsupported Request", /* Bit Position 20 */
> + [0] = "Undefined",
> + [4] = "Data Link Protocol Error",
> + [5] = "Surprise Down Error",
> + [12] = "Poisoned TLP",
> + [13] = "Flow Control Protocol Error",
> + [14] = "Completion Timeout",
> + [15] = "Completer Abort",
> + [16] = "Unexpected Completion",
> + [17] = "Receiver Overflow",
> + [18] = "Malformed TLP",
> + [19] = "ECRC Error",
> + [20] = "Unsupported Request Error",
> + [21] = "ACS Violation",
> + [22] = "Uncorrectable Internal Error",
> + [23] = "MC Blocked TLP",
> + [24] = "AtomicOp Egress Blocked",
> + [25] = "TLP Prefix Blocked Error",
> };
>
> static const char *aer_agent_string[] = {
> --
> 2.0.0.rc2
>
next prev parent reply other threads:[~2014-09-05 23:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-13 6:22 [RESEND 0/5] PCIe, AER: Misc cleanup Chen, Gong
2014-08-13 6:22 ` [RESEND 1/5] RAS, trace: Update error definition format Chen, Gong
2014-08-13 6:22 ` [RESEND 2/5] PCIe, AER: Replenish missed AER status bits for AER driver Chen, Gong
2014-09-05 23:15 ` Bjorn Helgaas [this message]
2014-09-09 7:03 ` Chen, Gong
2014-09-25 15:51 ` Bjorn Helgaas
2014-08-13 6:22 ` [RESEND 3/5] PCIe, trace: Replenish missed AER status bits for PCIE trace I/F Chen, Gong
2014-08-13 6:22 ` [RESEND 4/5] PCIe, AER: Make AER UC status naming clearer Chen, Gong
2014-08-13 6:22 ` [RESEND RFC 5/5] PCIe, AER: Update initial value of UC error mask Chen, Gong
2014-09-05 23:34 ` Bjorn Helgaas
2014-09-09 7:12 ` Chen, Gong
2014-08-13 13:52 ` [RESEND 0/5] PCIe, AER: Misc cleanup Bjorn Helgaas
2014-08-14 1:52 ` Chen, Gong
2014-09-02 1:31 ` Chen, Gong
2014-09-25 15:54 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140905231543.GK8080@google.com \
--to=bhelgaas@google.com \
--cc=bp@alien8.de \
--cc=gong.chen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome