Re: [RESEND PATCH v3] rtc: ds1307: add trickle charger device tree binding

[Jason Cooper <jason@lakedaemon.net>]

On Tue, Sep 09, 2014 at 11:29:11AM +0300, Matti Vaittinen wrote:
> On Mon, Sep 08, 2014 at 07:26:57AM -0400, ext Jason Cooper wrote:
> > Matti,
> > 
> > On Mon, Sep 08, 2014 at 10:32:24AM +0300, Matti Vaittinen wrote:
> > > ---
> > 
> > Here.  Otherwise, it'll get included in the commit message, which I
> > don't think was your intention.
> 
> Ok, thanks.
> 
> > 
> > >  .../devicetree/bindings/i2c/trivial-devices.txt    |  1 -
> > >  .../devicetree/bindings/rtc/dallas,ds1339.txt      | 18 ++++++
> > >  drivers/rtc/rtc-ds1307.c                           | 66 ++++++++++++++++++++--
> > >  3 files changed, 80 insertions(+), 5 deletions(-)
> > >  create mode 100644 Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
> > 
> > I would split this into two patches, one for the binding documentation,
> > and one for the C file changes.  You can then use
> > ./scripts/get_maintainer.pl to see who the rtc maintainer is (nothing
> > jumps out from my memory).
> 
> Splitting sounds reasonable. I will do this and also invert the default
> diode setting to be connected as was suggested by Pavel in mail responce
> to v1 of patch. And Alessandro is the maintainer for rtc according to
> the MAINTAINERS file.
> 
> > 
> > Most likely, the rtc maintainer will take the series with the DT
> > maintainers Acks.  You made all the binding changes as discussed by Mark
> > and I, so fwiw,
> > 
> > Acked-by: Jason Cooper <jason@lakedaemon.net>
> > 
> > Just keep in mind that I'm not a DT maintainer, I've just moved a lot of
> > patches into that area :-P  When you respin the series to split it, just
> > throw my Ack on the binding docs.
> 
> Thanks, although the doc will change when I invert the default diode
> setting  =)

Yep, I'm fine with the inversion.  Feel free to keep the Ack.

thx,

Jason.