From: Baoquan He <bhe@redhat.com>
To: Vivek Goyal <vgoyal@redhat.com>
Cc: Kees Cook <keescook@chromium.org>,
LKML <linux-kernel@vger.kernel.org>,
Andi Kleen <ak@linux.intel.com>, Ingo Molnar <mingo@redhat.com>,
Thomas Deutschmann <whissi@whissi.de>,
Dave Young <dyoung@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
WANG Chao <chaowang@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Subject: Re: [PATCH 1/4] kaslr: check user's config too when handle relocations
Date: Wed, 10 Sep 2014 15:21:15 +0800 [thread overview]
Message-ID: <20140910072115.GA31685@dhcp-16-116.nay.redhat.com> (raw)
In-Reply-To: <20140909192813.GB9435@redhat.com>
On 09/09/14 at 03:28pm, Vivek Goyal wrote:
> On Tue, Sep 09, 2014 at 08:53:29AM -0700, Kees Cook wrote:
> > I still think this needs a test for the 32-bit case, since IUIC, it
> > requires relocations unconditionally.
>
> [ CC hpa ]
>
> Bao, for modifications in this area, I would recommend CC hpa too.
>
> I also think that i386 will always require relocation handling. That's
> how Eric had designed it. There was no separate kernel text mapping
> region so PAGE_OFFSET was constant. Hence if you shift kernel in physical
> address space, you had to shift mappings in virtual address space by
> equal amount.
>
> But in x86_64, we have kernel text mapped in a separate virtual region, and
> that allowed us wiggling room and we could load kernel anywhere
> in physical address space and just change mappings of kernel text
> virtual address region accordingly.
>
> So I agree that on i386, we will most likely require relocations all
> the time. Having said that, it is interesting that one can disable
> X86_NEED_RELOCS on i386 while RELOCATBALE=y.
>
> # Relocation on x86 needs some additional build support
> config X86_NEED_RELOCS
> def_bool y
> depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE)
>
> I am not sure how i386 RELOCATABLE kernel will work if X86_NEED_RELOCS=n.
>
>
> Secondly, IIUC, kernel has 32bit signed relocations. That means
> relocations can be processed successfully only if kernel is loaded
> in first 2G or -2G. If that's the case, then aslr mechanism should
> see that where kernel is loaded physically and if it is loaded outside
> the range where relocations can be processed successfully, it should
> disable itself and output a message.
Yes, kernel only handle 2G or -2G relocation since 32 bit signed
relocations. But for aslr, since the kernel text mapping shares 2G
virtual address space with modules, only 1G relocation can be done. I
took a test, when load kernel at 1G, if not checking if output_orig
and output are equal, it will trigger a BIOS reboot. And with the
restriction checking in process_e820_entry(), the kaslr relocations only
happens inside 1G.
If max_addr is outside 1G, namely CONFIG_RANDOMIZE_BASE_MAX_OFFSET, the
kaslr random kernel location choosing won't happen, then checking if
output_orig is equal to outout in handle_relocations(), if equal nothing
happened. This truly don't need to specify "nokaslr".
In fact, I think below checking will be clearer and works too.
static void handle_relocations(void *output, unsigned long output_len)
{
...
#if CONFIG_X86_64
or
#if CONFIG_RANDOMIZE_BASE
#ifdef CONFIG_HIBERNATION
if (!cmdline_find_option_bool("kaslr")) {
debug_putstr("No relocation needed... ");
return;
}
#else
if (cmdline_find_option_bool("nokaslr")) {
debug_putstr("No relocation needed... ");
return;
}
#endif
if (max_addr > CONFIG_RANDOMIZE_BASE_MAX_OFFSET) {
debug_putstr("Random addr is not allowed. No relocation
needed... \n");
return;
}
#endif
...
}
>
> That way, one will not have to pass explicit "nokaslr" parameter to kernel.
> If kernel can't handle relocations successfully, it will automatically
> disable kaslr.
>
> Thanks
> Vivek
>
> >
> > -Kees
> >
> > > delta = min_addr - LOAD_PHYSICAL_ADDR;
> > > if (!delta) {
> > > debug_putstr("No relocation needed... ");
> > > @@ -299,7 +303,8 @@ static void handle_relocations(void *output, unsigned long output_len)
> > > #endif
> > > }
> > > #else
> > > -static inline void handle_relocations(void *output, unsigned long output_len)
> > > +static inline void handle_relocations(void *output_orig, void *output,
> > > + unsigned long output_len)
> > > { }
> > > #endif
> > >
> > > @@ -360,6 +365,8 @@ asmlinkage __visible void *decompress_kernel(void *rmode, memptr heap,
> > > unsigned char *output,
> > > unsigned long output_len)
> > > {
> > > + unsigned char *output_orig = output;
> > > +
> > > real_mode = rmode;
> > >
> > > sanitize_boot_params(real_mode);
> > > @@ -402,7 +409,7 @@ asmlinkage __visible void *decompress_kernel(void *rmode, memptr heap,
> > > debug_putstr("\nDecompressing Linux... ");
> > > decompress(input_data, input_len, NULL, NULL, output, NULL, error);
> > > parse_elf(output);
> > > - handle_relocations(output, output_len);
> > > + handle_relocations(output_orig, output, output_len);
> > > debug_putstr("done.\nBooting the kernel.\n");
> > > return output;
> > > }
> > > --
> > > 1.8.5.3
> > >
> >
> >
> >
> > --
> > Kees Cook
> > Chrome OS Security
next prev parent reply other threads:[~2014-09-10 7:21 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 14:08 [PATCH 0/4] fix the compatibility between kaslr and kexe Baoquan He
2014-09-05 14:08 ` [PATCH 1/4] kaslr: check user's config too when handle relocations Baoquan He
2014-09-05 17:11 ` Kees Cook
2014-09-05 22:37 ` Baoquan He
2014-09-09 6:24 ` Baoquan He
2014-09-09 15:53 ` Kees Cook
2014-09-09 19:28 ` Vivek Goyal
2014-09-09 21:13 ` Kees Cook
2014-09-10 7:21 ` Baoquan He [this message]
2014-09-10 14:30 ` Vivek Goyal
2014-09-10 14:41 ` Kees Cook
2014-09-10 15:05 ` Vivek Goyal
2014-09-10 15:27 ` Baoquan He
2014-09-10 15:38 ` Vivek Goyal
2014-09-11 9:31 ` Baoquan He
2014-09-11 16:18 ` Kees Cook
2014-09-10 14:53 ` Baoquan He
2014-09-10 15:04 ` Vivek Goyal
2014-09-10 15:13 ` Baoquan He
2014-09-10 6:10 ` Baoquan He
2014-09-10 13:20 ` Vivek Goyal
2014-09-05 14:08 ` [PATCH 2/4] kaslr: check if the random addr is available Baoquan He
2014-09-05 17:16 ` Kees Cook
2014-09-05 22:16 ` Baoquan He
2014-09-09 19:41 ` Vivek Goyal
2014-09-10 13:55 ` Baoquan He
2014-09-05 14:08 ` [PATCH 3/4] kaslr setup_data handling Baoquan He
2014-09-05 17:32 ` Kees Cook
2014-09-05 22:27 ` Baoquan He
2014-09-09 19:45 ` Vivek Goyal
2014-09-09 19:49 ` H. Peter Anvin
2014-09-09 21:10 ` Kees Cook
2014-09-05 14:08 ` [PATCH 4/4] export the kernel image size KERNEL_IMAGE_SIZE Baoquan He
2014-09-05 17:00 ` Kees Cook
2014-09-09 19:47 ` Vivek Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140910072115.GA31685@dhcp-16-116.nay.redhat.com \
--to=bhe@redhat.com \
--cc=ak@linux.intel.com \
--cc=chaowang@redhat.com \
--cc=dyoung@redhat.com \
--cc=hpa@zytor.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=vgoyal@redhat.com \
--cc=whissi@whissi.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®