Re: [PATCH] staging: rtl8188eu: Fix coding style error problems

[Sudip Mukherjee <sudipm.mukherjee@gmail.com>]

On Thu, Oct 09, 2014 at 05:03:07PM +0800, Jia He wrote:
> Signed-off-by: Jia He <hejianet@gmail.com>
> This fixes all coding style error problems at rtl8188eu which
> makes checkpatch.pl unhappy

your commit message should be above your Signed-off line.

mention what type of error you are fixing.

you are doing multiple types of error fix in this patch,
usually we do only a single type of fix in one patch and if you want
to do multiple fix then better send a series of patch , and in each patch
mention what type of error it fixes.

thanks
sudip

> ---
>  drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 ++--
>  drivers/staging/rtl8188eu/hal/fw.c     | 4 ++--
>  drivers/staging/rtl8188eu/hal/phy.c    | 2 +-
>  drivers/staging/rtl8188eu/hal/rf.c     | 4 ++--
>  drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
>  5 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c b/drivers/staging/rtl8188eu/hal/bb_cfg.c
> index 80e8cc9..3743a72 100644
> --- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
> +++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
> @@ -173,7 +173,7 @@ static bool set_baseband_agc_config(struct adapter *adapt)
>  		u32 v1 = array[i];
>  		u32 v2 = array[i+1];
>  
> -		if (v1 < 0xCDCDCDCD){
> +		if (v1 < 0xCDCDCDCD) {
>  			phy_set_bb_reg(adapt, v1, bMaskDWord, v2);
>  			udelay(1);
>  		}
> @@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter, u32 regaddr, u32 bitm
>  	}
>  }
>  
> -static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32 data)
> +static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32 data)
>  {
>  	if (addr == 0xfe) {
>  		msleep(50);
> diff --git a/drivers/staging/rtl8188eu/hal/fw.c b/drivers/staging/rtl8188eu/hal/fw.c
> index 17b7f37..d6efd54 100644
> --- a/drivers/staging/rtl8188eu/hal/fw.c
> +++ b/drivers/staging/rtl8188eu/hal/fw.c
> @@ -193,13 +193,13 @@ int rtl88eu_download_fw(struct adapter *adapt)
>  	u32 fwsize;
>  	int err;
>  
> -	if (request_firmware(&fw, fw_name, device)){
> +	if (request_firmware(&fw, fw_name, device)) {
>  		dev_err(device, "Firmware %s not available\n", fw_name);
>  		return -ENOENT;
>  	}
>  
>  	if (fw->size > FW_8188E_SIZE) {
> -		dev_err(device,"Firmware size exceed 0x%X. Check it.\n",
> +		dev_err(device, "Firmware size exceed 0x%X. Check it.\n",
>  			 FW_8188E_SIZE);
>  		return -1;
>  	}
> diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
> index c4f7f35..3f663fe 100644
> --- a/drivers/staging/rtl8188eu/hal/phy.c
> +++ b/drivers/staging/rtl8188eu/hal/phy.c
> @@ -478,7 +478,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
>  		/* 2.4G, decrease power */
>  		{0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11},
>  		/* 2.4G, increase power */
> -		{0, 0, -1, -2, -3, -4,-4, -4, -4, -5, -7, -8,-9, -9, -10},
> +		{0, 0, -1, -2, -3, -4, -4, -4, -4, -5, -7, -8, -9, -9, -10},
>  	};
>  	u8 thermal_mapping[2][index_mapping_NUM_88E] = {
>  		/* 2.4G, decrease power */
> diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
> index c2fac34..8e7a0b1 100644
> --- a/drivers/staging/rtl8188eu/hal/rf.c
> +++ b/drivers/staging/rtl8188eu/hal/rf.c
> @@ -102,7 +102,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
>  		}
>  	}
>  	rtl88eu_dm_txpower_track_adjust(&hal_data->odmpriv, 1, &direction,
> -				        &pwrtrac_value);
> +					&pwrtrac_value);
>  
>  	if (direction == 1) {
>  		/*  Increase TX power */
> @@ -131,7 +131,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
>  /*  powerbase1 for HT MCS rates */
>  static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
>  			    u8 *pwr_level_bw20, u8 *pwr_level_bw40,
> -			    u8 channel,u32 *ofdmbase, u32 *mcs_base)
> +			    u8 channel, u32 *ofdmbase, u32 *mcs_base)
>  {
>  	struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
>  	u32 powerbase0, powerbase1;
> diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c b/drivers/staging/rtl8188eu/hal/rf_cfg.c
> index ddc2f55..5dc11ca 100644
> --- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
> +++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
> @@ -164,7 +164,7 @@ do {								\
>  #define B3WIREDATALENGTH 0x800
>  #define BRFSI_RFENV 0x10
>  
> -static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath,u32 addr, u32 mask, u32 data)
> +static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath, u32 addr, u32 mask, u32 data)
>  {
>  	if (addr == 0xfe) {
>  		mdelay(50);
> @@ -190,7 +190,7 @@ static void rtl8188e_config_rf_reg(struct adapter *adapt,
>  	u32 content = 0x1000; /*RF Content: radio_a_txt*/
>  	u32 maskforphyset = (u32)(content & 0xE000);
>  
> -	rtl_rfreg_delay(adapt, RF90_PATH_A, addr| maskforphyset,
> +	rtl_rfreg_delay(adapt, RF90_PATH_A, addr | maskforphyset,
>  			RFREG_OFFSET_MASK,
>  			data);
>  }
> -- 
> 1.9.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/