FYI, we noticed the below changes on https://git.linaro.org/people/ard.biesheuvel/linux-arm efi-for-3.19 commit aacdce6e880894acb57d71dcb2e3fc61b4ed4e96 ("dmi: add support for SMBIOS 3.0 64-bit entry point") +-----------------------+------------+------------+ | | 2fa165a26c | aacdce6e88 | +-----------------------+------------+------------+ | boot_successes | 20 | 10 | | early-boot-hang | 1 | | | boot_failures | 0 | 5 | | PANIC:early_exception | 0 | 5 | +-----------------------+------------+------------+ [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1 [ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8 [ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401 [ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x4e/0x68 [ 0.000000] [] early_idt_handler+0x90/0xb7 [ 0.000000] [] ? dmi_save_one_device+0x81/0x81 [ 0.000000] [] ? dmi_table+0x3f/0x94 [ 0.000000] [] ? dmi_table+0x16/0x94 [ 0.000000] [] ? dmi_save_one_device+0x81/0x81 [ 0.000000] [] ? dmi_save_one_device+0x81/0x81 [ 0.000000] [] dmi_walk_early+0x44/0x69 [ 0.000000] [] dmi_present+0x180/0x1ff [ 0.000000] [] dmi_scan_machine+0x144/0x191 [ 0.000000] [] ? loglevel+0x31/0x31 [ 0.000000] [] setup_arch+0x490/0xc73 [ 0.000000] [] ? printk+0x4d/0x4f [ 0.000000] [] start_kernel+0x9c/0x43f [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [] x86_64_start_kernel+0x13b/0x14a [ 0.000000] RIP 0x4