From: Thomas Graf <tgraf@suug.ch>
To: "Varlese, Marco" <marco.varlese@intel.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"Fastabend, John R" <john.r.fastabend@intel.com>,
Jiri Pirko <jiri@resnulli.us>,
"roopa@cumulusnetworks.com" <roopa@cumulusnetworks.com>,
"sfeldma@gmail.com" <sfeldma@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH net-next v2 1/1] net: Support for switch port configuration
Date: Thu, 18 Dec 2014 11:41:45 +0000 [thread overview]
Message-ID: <20141218114145.GH28766@casper.infradead.org> (raw)
In-Reply-To: <C4896FB061E7DE4AAC93031BDCA044B104AD7B82@IRSMSX108.ger.corp.intel.com>
On 12/18/14 at 11:29am, Varlese, Marco wrote:
> diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
> index f7d0d2d..19cb51a 100644
> --- a/include/uapi/linux/if_link.h
> +++ b/include/uapi/linux/if_link.h
> @@ -146,6 +146,7 @@ enum {
> IFLA_PHYS_PORT_ID,
> IFLA_CARRIER_CHANGES,
> IFLA_PHYS_SWITCH_ID,
> + IFLA_SWITCH_PORT_CFG,
> __IFLA_MAX
> };
Needs an entry in ifla_policy[]
[IFLA_SWITCH_PORT_CFG] = { .type = NLA_NESTED },
> @@ -603,4 +604,18 @@ enum {
>
> #define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1)
>
> +/* Switch Port Attributes section */
> +
> +enum {
> + IFLA_ATTR_UNSPEC,
> + IFLA_ATTR_LEARNING,
> + IFLA_ATTR_LOOPBACK,
> + IFLA_ATTR_BCAST_FLOODING,
> + IFLA_ATTR_UCAST_FLOODING,
> + IFLA_ATTR_MCAST_FLOODING,
> + __IFLA_ATTR_MAX
> +};
> +
> +#define IFLA_ATTR_MAX (__IFLA_ATTR_MAX - 1)
Change the prefix to IFLA_SW_* since it's switch specific?
>
> +#ifdef CONFIG_NET_SWITCHDEV
> +static int do_setswcfg(struct net_device *dev, struct nlattr *attr)
> +{
> + int rem, err = -EINVAL;
> + struct nlattr *v;
> + const struct net_device_ops *ops = dev->netdev_ops;
> +
> + nla_for_each_nested(v, attr, rem) {
> + u32 op = nla_type(v);
> + u64 value = 0;
> +
> + switch (op) {
> + case IFLA_ATTR_LEARNING:
> + case IFLA_ATTR_LOOPBACK:
> + case IFLA_ATTR_BCAST_FLOODING:
> + case IFLA_ATTR_UCAST_FLOODING:
> + case IFLA_ATTR_MCAST_FLOODING: {
> + if (nla_len(v) < sizeof(value)) {
> + err = -EINVAL;
> + break;
> + }
You should validate the message before you start applying the
changes. Otherwise if the 3rd attribute is too short you've already
applied some changes and the user has not idea how much has been
applied.
nla_parse_nested() can help here.
> +
> + value = nla_get_u64(v);
> + err = ops->ndo_switch_port_set_cfg(dev,
> + op,
> + value);
This avoids having individual ndos but wastes a lot of space in the
Netlink message. Not a problem when setting configuration but you
likely want to dump these attributes as well and we need 12 bytes
for each attribute even though some are merely flags which could fit
in 4 bytes.
> static int do_setvfinfo(struct net_device *dev, struct nlattr *attr)
> {
> int rem, err = -EINVAL;
> @@ -1740,6 +1780,20 @@ static int do_setlink(const struct sk_buff *skb,
> status |= DO_SETLINK_NOTIFY;
> }
> }
> +#ifdef CONFIG_NET_SWITCHDEV
> + if (tb[IFLA_SWITCH_PORT_CFG]) {
> + err = -EOPNOTSUPP;
> + if (!ops->ndo_switch_port_set_cfg)
> + goto errout;
> + if (!ops->ndo_switch_parent_id_get)
> + goto errout;
> + err = do_setswcfg(dev, tb[IFLA_SWITCH_PORT_CFG]);
> + if (err < 0)
> + goto errout;
> +
> + status |= DO_SETLINK_NOTIFY;
> + }
> +#endif
Should return -EOPNOTSUPP if IFLA_SWITCH_PORT_CFG is provided but
CONFIG_NET_SWITCHDEV is not set.
next prev parent reply other threads:[~2014-12-18 11:41 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 11:29 Varlese, Marco
2014-12-18 11:41 ` Thomas Graf [this message]
2014-12-18 15:20 ` Varlese, Marco
2014-12-18 14:44 ` Roopa Prabhu
2014-12-18 14:55 ` Varlese, Marco
2014-12-18 15:16 ` Roopa Prabhu
2014-12-18 17:25 ` Varlese, Marco
2014-12-18 17:49 ` Roopa Prabhu
2014-12-18 18:02 ` Varlese, Marco
2014-12-18 18:14 ` Roopa Prabhu
2014-12-18 19:21 ` John Fastabend
2014-12-18 22:43 ` Arad, Ronen
2014-12-19 8:14 ` Jiri Pirko
2014-12-18 23:07 ` Roopa Prabhu
2014-12-18 23:26 ` Samudrala, Sridhar
2014-12-18 23:48 ` Roopa Prabhu
2014-12-19 5:14 ` B Viswanath
2014-12-19 8:27 ` Jiri Pirko
2014-12-19 9:01 ` B Viswanath
2014-12-19 9:22 ` B Viswanath
2014-12-19 9:35 ` Jiri Pirko
2014-12-19 9:23 ` Jiri Pirko
2014-12-19 9:35 ` B Viswanath
2014-12-19 9:55 ` Jiri Pirko
2014-12-19 10:53 ` B Viswanath
2014-12-19 16:22 ` Roopa Prabhu
2014-12-20 0:57 ` Williams, Kenneth
2014-12-19 14:50 ` Andy Gospodarek
2014-12-19 8:25 ` Jiri Pirko
2014-12-19 0:45 ` Thomas Graf
2014-12-18 15:47 ` Arad, Ronen
2014-12-18 16:14 ` John Fastabend
2014-12-18 17:17 ` Arad, Ronen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141218114145.GH28766@casper.infradead.org \
--to=tgraf@suug.ch \
--cc=jiri@resnulli.us \
--cc=john.r.fastabend@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marco.varlese@intel.com \
--cc=netdev@vger.kernel.org \
--cc=roopa@cumulusnetworks.com \
--cc=sfeldma@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®